7,5 mm Element design for high performance engine
7,5 mm Element design for high performance engine
(11-15-2012, 11:02 AM)EDH_Performance(11-15-2012, 10:44 AM)m2rkz I got pump from dieselmeken maybe in february but now I testid it. I have master power R6164. I went to dyno and got only 194kw from wheels. max boost was already at 3500grm 2,5bar. to 3500grm there is lot of black smoke and then the boost stays to 4500 and then go lower. and then there is not much black smoke. It seems like it gets too much diesel with low grm and too few diesel in high grm. With my wastegate I must get more than 3,0 bars. but there is not enough gases. It seems like settings in pump are all wrong. EGT is max 550.
Any ideas?
there is no such thing as "the motor gets to much fuel", you simply need more air
And this sounds like a fuelfeed problem! Have you changed the fuel lines and mounted big feed pump?
(11-15-2012, 11:02 AM)EDH_Performance(11-15-2012, 10:44 AM)m2rkz I got pump from dieselmeken maybe in february but now I testid it. I have master power R6164. I went to dyno and got only 194kw from wheels. max boost was already at 3500grm 2,5bar. to 3500grm there is lot of black smoke and then the boost stays to 4500 and then go lower. and then there is not much black smoke. It seems like it gets too much diesel with low grm and too few diesel in high grm. With my wastegate I must get more than 3,0 bars. but there is not enough gases. It seems like settings in pump are all wrong. EGT is max 550.
Any ideas?
there is no such thing as "the motor gets to much fuel", you simply need more air
And this sounds like a fuelfeed problem! Have you changed the fuel lines and mounted big feed pump?