7,5 mm Element design for high performance engine
7,5 mm Element design for high performance engine
Thursday 2012-05-10, After a lot of e-mail, msn-chatt etc etc, factory #1 did send back my faulty serie 1 element, The could do a nice element, but not follow the drawing, so 3 different dimensions was wrong.
These 3 dimensions however, can be adjusted back home in Sweden. That is what I have done with the first 80 element, Now I have 100 moore that need adjusting, that is on its way now.
Buisiness with that company is now over for good.
From my "new" factory I have ordered some samples, just to see the quality, after that I will send over a sample to them for pricing & production. Hopfully this will work out better than with #1.
I have had some thougs regarding the 8 mm element, maybee do one serie with a very short duration time and maybee 170-180ccm of fuel instead of doing it whit long duration and 230ccm of fuel?
The thing is that the wall in the element is thin with 7,5, even thinner with 8 mm, Im afraid that it will crack and make a pumpmeltdown..
I keep on working, now there is 7,5 mm element, 140cc of fuel in the shop, not for sale however, but I can build up your M-pump now.