7,5 mm Element design for high performance engine

STD Tuning Engine 7,5 mm Element design for high performance engine

7,5 mm Element design for high performance engine

7,5 mm Element design for high performance engine

View a Printable Version

5 Vote(s) - 4.8 Average

Holset

407

03-30-2012, 04:57 AM #101

I have recently started a little project concerning the duration on different sizes of element & camshafts. When I have all the facts around it I will write it down, but its a h*** of a job, then maybee we can crush the myth about "camshaft over this and that number gives 5 % moore power" etc.
Just to look at, there is no visible difference other than the "powercamshaft" have a larger bearing in the back.
We can call it dieselmythbusters.
Who knows? Maybee its thru? Someone that knows?
Fact will come to STD forum soon, keep yourself updated Smile

Smile

For the moment I have 6 mm 606 element in a RS158 pump done with graph and so on. Cred to Tomnik for the math & graphic.
Moore will come to compare with.

OT, On the big P3000-7000-seriepumps for pulling that I have done, the cams have been grinded to give a bigger lift on the element and also the duration is changed, we talking 13mm 1000ccm &1000rpm of fuel.
That have not been done by me, Ketner Denmark is very good at this and have the right stuff to do the work.

http://www.facebook.com/dieselmeken

dieselmeken

03-30-2012, 04:57 AM #101

I have recently started a little project concerning the duration on different sizes of element & camshafts. When I have all the facts around it I will write it down, but its a h*** of a job, then maybee we can crush the myth about "camshaft over this and that number gives 5 % moore power" etc.
Just to look at, there is no visible difference other than the "powercamshaft" have a larger bearing in the back.
We can call it dieselmythbusters.
Who knows? Maybee its thru? Someone that knows?
Fact will come to STD forum soon, keep yourself updated Smile
For the moment I have 6 mm 606 element in a RS158 pump done with graph and so on. Cred to Tomnik for the math & graphic.
Moore will come to compare with.

OT, On the big P3000-7000-seriepumps for pulling that I have done, the cams have been grinded to give a bigger lift on the element and also the duration is changed, we talking 13mm 1000ccm &1000rpm of fuel.
That have not been done by me, Ketner Denmark is very good at this and have the right stuff to do the work.

http://www.facebook.com/dieselmeken

View a Printable Version

5 Vote(s) - 4.8 Average

Messages In This Thread

7,5 mm Element design for high performance engine - by dieselmeken - 02-27-2012, 02:43 PM

RE: 7,5 mm Element design for high performance engine - by Palmer - 02-27-2012, 03:45 PM

RE: 7,5 mm Element design for high performance engine - by willbhere4u - 02-27-2012, 04:37 PM

RE: 7,5 mm Element design for high performance engine - by Booster - 02-27-2012, 06:04 PM

RE: 7,5 mm Element design for high performance engine - by w123love - 02-27-2012, 08:28 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 02-27-2012, 09:10 PM

RE: 7,5 mm Element design for high performance engine - by pp d - 02-28-2012, 01:39 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 02-28-2012, 02:13 AM

RE: 7,5 mm Element design for high performance engine - by barrote - 02-28-2012, 05:38 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 02-28-2012, 05:26 PM

RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 02-29-2012, 12:13 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 02-28-2012, 11:22 PM

RE: 7,5 mm Element design for high performance engine - by Simpler=Better - 02-28-2012, 10:31 AM

RE: 7,5 mm Element design for high performance engine - by w210tdt - 02-28-2012, 01:04 PM

RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 02-28-2012, 01:21 PM

RE: 7,5 mm Element design for high performance engine - by 2996 - 02-28-2012, 01:22 PM

RE: 7,5 mm Element design for high performance engine - by huseyin55amg - 02-28-2012, 01:58 PM

RE: 7,5 mm Element design for high performance engine - by Captain America - 02-29-2012, 01:25 AM

RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 02-29-2012, 12:31 PM

RE: 7,5 mm Element design for high performance engine - by aaa - 02-29-2012, 03:47 PM

RE: 7,5 mm Element design for high performance engine - by w123love - 02-29-2012, 09:42 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-01-2012, 12:58 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-01-2012, 01:41 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-01-2012, 07:29 PM

RE: 7,5 mm Element design for high performance engine - by aaa - 03-01-2012, 07:43 PM

RE: 7,5 mm Element design for high performance engine - by w123love - 03-01-2012, 09:33 PM

RE: 7,5 mm Element design for high performance engine - by SurfRodder - 03-02-2012, 10:18 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-04-2012, 08:34 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-05-2012, 05:20 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-05-2012, 07:51 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 03-06-2012, 09:43 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-07-2012, 02:22 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-04-2012, 01:59 PM

RE: 7,5 mm Element design for high performance engine - by squirrelmaster - 03-04-2012, 04:47 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-05-2012, 06:00 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 03-05-2012, 04:15 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-06-2012, 01:29 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-06-2012, 02:40 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-06-2012, 04:14 PM

RE: 7,5 mm Element design for high performance engine - by iheartboost - 03-07-2012, 09:37 AM

RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 03-07-2012, 10:44 PM

RE: 7,5 mm Element design for high performance engine - by jonbobshinigin - 03-07-2012, 11:09 PM

RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 03-08-2012, 02:44 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-08-2012, 05:05 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-08-2012, 07:40 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-08-2012, 08:19 AM

RE: 7,5 mm Element design for high performance engine - by Savitas - 03-09-2012, 04:01 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-11-2012, 11:51 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 03-15-2012, 06:33 PM

RE: 7,5 mm Element design for high performance engine - by iheartboost - 03-08-2012, 08:02 PM

RE: 7,5 mm Element design for high performance engine - by diesel2fast4u - 03-09-2012, 02:16 AM

RE: 7,5 mm Element design for high performance engine - by George3soccer - 03-09-2012, 08:54 AM

RE: 7,5 mm Element design for high performance engine - by Alastair E - 03-13-2012, 06:15 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-13-2012, 07:37 AM

RE: 7,5 mm Element design for high performance engine - by Twinturboguy - 03-14-2012, 12:16 PM

RE: 7,5 mm Element design for high performance engine - by W126Lover - 03-18-2012, 12:22 AM

RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 03-18-2012, 01:04 AM

RE: 7,5 mm Element design for high performance engine - by pp d - 03-18-2012, 10:29 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-21-2012, 04:09 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-21-2012, 04:54 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-21-2012, 05:40 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-21-2012, 05:48 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-21-2012, 07:55 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-21-2012, 08:45 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 03-21-2012, 09:14 PM

RE: 7,5 mm Element design for high performance engine - by Twinturboguy - 03-21-2012, 07:40 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-21-2012, 09:00 AM

RE: 7,5 mm Element design for high performance engine - by yankneck696 - 03-21-2012, 04:49 PM

RE: 7,5 mm Element design for high performance engine - by ErikT - 03-21-2012, 05:04 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-21-2012, 05:31 PM

RE: 7,5 mm Element design for high performance engine - by pp d - 03-22-2012, 01:02 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 03-24-2012, 08:45 AM

RE: 7,5 mm Element design for high performance engine - by Booster - 03-22-2012, 11:04 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-22-2012, 01:36 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 03-23-2012, 04:09 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-23-2012, 07:03 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-23-2012, 02:34 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-23-2012, 02:17 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-23-2012, 04:07 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-23-2012, 05:57 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-24-2012, 12:21 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-24-2012, 04:43 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 03-24-2012, 02:51 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-25-2012, 03:03 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 03-26-2012, 02:32 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-26-2012, 06:04 PM

RE: 7,5 mm Element design for high performance engine - by Savitas - 03-27-2012, 02:41 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-28-2012, 06:10 AM

RE: 7,5 mm Element design for high performance engine - by Savitas - 03-28-2012, 07:47 AM

RE: 7,5 mm Element design for high performance engine - by Alastair E - 03-28-2012, 11:16 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-28-2012, 12:29 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-28-2012, 02:19 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-29-2012, 10:02 AM

RE: 7,5 mm Element design for high performance engine - by JustPassinThru - 03-28-2012, 11:28 AM

RE: 7,5 mm Element design for high performance engine - by erling66 - 03-28-2012, 03:29 PM

RE: 7,5 mm Element design for high performance engine - by Simpler=Better - 03-28-2012, 03:32 PM

RE: 7,5 mm Element design for high performance engine - by Alastair E - 03-29-2012, 10:19 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-29-2012, 04:46 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-29-2012, 11:59 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-30-2012, 02:16 AM

RE: 7,5 mm Element design for high performance engine - by swecias - 04-01-2012, 03:30 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-30-2012, 04:57 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-30-2012, 05:15 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-31-2012, 01:21 AM

RE: 7,5 mm Element design for high performance engine - by erling66 - 03-31-2012, 02:40 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-31-2012, 02:11 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 04-01-2012, 03:07 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 04-01-2012, 09:23 AM

RE: 7,5 mm Element design for high performance engine - by erling66 - 04-01-2012, 01:43 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 04-02-2012, 08:50 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-02-2012, 10:56 AM

RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 04-02-2012, 09:33 PM

RE: 7,5 mm Element design for high performance engine - by yankneck696 - 04-02-2012, 05:47 PM

RE: 7,5 mm Element design for high performance engine - by 2996 - 04-03-2012, 12:13 PM

RE: 7,5 mm Element design for high performance engine - by lgreeley83 - 04-03-2012, 12:48 PM

RE: 7,5 mm Element design for high performance engine - by iheartboost - 04-03-2012, 09:13 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-05-2012, 01:55 PM

RE: 7,5 mm Element design for high performance engine - by iheartboost - 04-05-2012, 07:05 PM

RE: 7,5 mm Element design for high performance engine - by Captain America - 04-09-2012, 03:29 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-09-2012, 03:36 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-11-2012, 01:00 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 04-11-2012, 03:25 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-17-2012, 12:12 AM

RE: 7,5 mm Element design for high performance engine - by Volker407 - 05-28-2012, 04:20 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-28-2012, 09:45 AM

RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 04-17-2012, 01:54 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 04-19-2012, 04:54 PM

RE: 7,5 mm Element design for high performance engine - by yatzee - 04-19-2012, 04:56 PM

RE: 7,5 mm Element design for high performance engine - by 300SD_KY - 04-20-2012, 08:16 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 04-27-2012, 05:56 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-27-2012, 06:29 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 04-27-2012, 06:35 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 04-27-2012, 05:38 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 05-01-2012, 09:51 AM

RE: 7,5 mm Element design for high performance engine - by swecias - 05-01-2012, 03:30 PM

RE: 7,5 mm Element design for high performance engine - by Diesel-Wiking - 05-01-2012, 04:08 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-02-2012, 02:21 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 05-04-2012, 08:05 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-04-2012, 10:19 AM

RE: 7,5 mm Element design for high performance engine - by George3soccer - 05-04-2012, 11:45 AM

RE: 7,5 mm Element design for high performance engine - by swecias - 05-04-2012, 12:59 PM

RE: 7,5 mm Element design for high performance engine - by bricktron - 05-06-2012, 01:39 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-11-2012, 11:11 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 05-13-2012, 09:49 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-22-2012, 04:41 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 05-22-2012, 06:32 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 05-22-2012, 02:36 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-23-2012, 01:23 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 05-30-2012, 10:41 AM

RE: 7,5 mm Element design for high performance engine - by W126Lover - 07-17-2012, 12:03 AM

RE: 7,5 mm Element design for high performance engine - by _siim_ - 07-17-2012, 08:35 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-17-2012, 01:03 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-19-2012, 06:05 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-19-2012, 12:12 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-19-2012, 03:02 PM

RE: 7,5 mm Element design for high performance engine - by Riverstick - 07-19-2012, 12:53 PM

RE: 7,5 mm Element design for high performance engine - by Spaceraver - 07-18-2012, 01:42 PM

RE: 7,5 mm Element design for high performance engine - by Greazzer - 07-19-2012, 07:34 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-20-2012, 12:27 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 07-20-2012, 09:38 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-20-2012, 01:44 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 07-20-2012, 02:53 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-21-2012, 12:01 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 07-21-2012, 03:53 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-22-2012, 02:20 AM

RE: 7,5 mm Element design for high performance engine - by frodes - 08-02-2012, 09:27 AM

RE: 7,5 mm Element design for high performance engine - by Greazzer - 07-20-2012, 10:36 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-06-2012, 01:04 PM

RE: 7,5 mm Element design for high performance engine - by Gearbound - 08-06-2012, 01:52 PM

RE: 7,5 mm Element design for high performance engine - by aaa - 08-06-2012, 11:38 PM

RE: 7,5 mm Element design for high performance engine - by frodes - 08-07-2012, 03:38 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-07-2012, 12:52 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 08-07-2012, 05:34 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-08-2012, 10:16 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 08-08-2012, 10:24 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-08-2012, 11:08 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 08-08-2012, 04:42 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-08-2012, 01:23 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 08-08-2012, 02:33 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-08-2012, 03:35 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-09-2012, 03:00 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 08-09-2012, 06:51 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-10-2012, 10:11 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 08-10-2012, 04:04 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 08-10-2012, 05:36 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-13-2012, 12:41 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 08-09-2012, 12:16 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-09-2012, 02:06 PM

RE: 7,5 mm Element design for high performance engine - by mercemann - 08-12-2012, 06:17 AM

RE: 7,5 mm Element design for high performance engine - by Mark_M - 08-12-2012, 08:36 AM

RE: 7,5 mm Element design for high performance engine - by mercemann - 08-12-2012, 10:47 AM

RE: 7,5 mm Element design for high performance engine - by Gearbound - 08-13-2012, 09:09 AM

RE: 7,5 mm Element design for high performance engine - by ronnie - 08-13-2012, 11:35 AM

RE: 7,5 mm Element design for high performance engine - by frodes - 08-13-2012, 02:03 PM

RE: 7,5 mm Element design for high performance engine - by mercemann - 08-13-2012, 03:57 PM

RE: 7,5 mm Element design for high performance engine - by frodes - 08-13-2012, 04:00 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 08-14-2012, 01:28 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 08-14-2012, 12:46 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-14-2012, 05:28 AM

RE: 7,5 mm Element design for high performance engine - by mercemann - 08-15-2012, 12:40 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-14-2012, 08:46 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-15-2012, 12:09 PM

RE: 7,5 mm Element design for high performance engine - by 300SD_KY - 08-17-2012, 09:18 AM

RE: 7,5 mm Element design for high performance engine - by RICHIS - 08-17-2012, 05:23 PM

RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 08-18-2012, 11:52 AM

RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 08-18-2012, 08:38 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 08-20-2012, 08:58 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 08-20-2012, 09:36 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 08-22-2012, 06:09 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-09-2012, 03:24 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 09-09-2012, 01:46 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-10-2012, 06:01 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 09-09-2012, 09:17 PM

RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 09-09-2012, 10:33 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 09-10-2012, 09:14 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 09-10-2012, 06:21 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 09-12-2012, 04:29 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 09-10-2012, 11:12 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-11-2012, 04:07 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 09-12-2012, 02:40 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-12-2012, 03:55 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 09-12-2012, 04:27 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 10-18-2012, 09:10 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 10-19-2012, 10:17 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 10-20-2012, 03:40 PM

RE: 7,5 mm Element design for high performance engine - by huseyin55amg - 10-25-2012, 03:22 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 10-27-2012, 04:09 AM

RE: 7,5 mm Element design for high performance engine - by huseyin55amg - 10-28-2012, 01:31 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 11:16 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 11-02-2012, 11:18 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 11:54 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 11-02-2012, 11:58 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 01:04 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-07-2012, 04:30 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-08-2012, 12:31 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 11-08-2012, 07:38 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-09-2012, 04:19 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-02-2012, 02:01 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 02:26 PM

RE: 7,5 mm Element design for high performance engine - by yankneck696 - 11-02-2012, 06:45 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 11-02-2012, 08:12 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 11-03-2012, 08:20 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-03-2012, 10:47 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-03-2012, 06:10 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 11-03-2012, 07:33 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 11-06-2012, 05:58 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-06-2012, 02:57 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-06-2012, 08:18 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-06-2012, 11:05 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 11-07-2012, 05:10 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-10-2012, 12:19 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-10-2012, 01:58 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-10-2012, 03:35 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 11-10-2012, 03:36 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-11-2012, 12:37 PM

RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-12-2012, 05:51 AM

RE: 7,5 mm Element design for high performance engine - by raidaru - 11-12-2012, 12:33 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-13-2012, 12:28 PM

RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-15-2012, 09:05 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 10:44 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 10:44 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 11:02 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 11:10 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 11:14 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 11:17 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 11:22 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:09 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 12:11 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 11-15-2012, 11:24 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:12 PM

RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-17-2012, 04:18 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 12:21 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-15-2012, 03:27 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:21 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 12:26 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:32 PM

RE: 7,5 mm Element design for high performance engine - by Savitas - 11-15-2012, 02:29 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 02:54 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 04:13 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 04:16 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-15-2012, 04:28 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 04:59 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-16-2012, 01:45 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-16-2012, 02:34 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-16-2012, 03:30 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-16-2012, 04:07 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 11-16-2012, 04:10 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 11-16-2012, 04:17 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-16-2012, 07:00 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-16-2012, 08:30 AM

RE: 7,5 mm Element design for high performance engine - by erling66 - 11-16-2012, 11:38 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-16-2012, 04:42 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 11-16-2012, 04:56 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-18-2012, 08:45 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-17-2012, 07:17 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-17-2012, 08:47 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-17-2012, 09:14 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-17-2012, 05:12 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-17-2012, 05:16 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 11-18-2012, 12:15 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-18-2012, 12:22 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 01:18 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-22-2012, 01:26 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 03:20 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 11-22-2012, 03:14 PM

RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-17-2012, 07:07 PM

RE: 7,5 mm Element design for high performance engine - by raysorenson - 11-17-2012, 08:50 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-22-2012, 03:36 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 07:10 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 11-24-2012, 01:24 PM

RE: 7,5 mm Element design for high performance engine - by Mark_M - 11-22-2012, 07:34 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 07:39 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-23-2012, 03:31 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-23-2012, 05:06 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-23-2012, 08:37 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-24-2012, 12:14 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-24-2012, 07:05 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-25-2012, 09:17 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-24-2012, 01:09 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-24-2012, 01:19 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-24-2012, 03:50 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-24-2012, 05:42 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-24-2012, 06:49 PM

RE: 7,5 mm Element design for high performance engine - by 300SD81 - 11-25-2012, 11:37 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-25-2012, 03:54 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-26-2012, 02:55 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-26-2012, 12:16 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-26-2012, 12:41 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-26-2012, 12:56 PM

RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-27-2012, 03:11 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-27-2012, 03:45 PM

RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-27-2012, 05:39 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-27-2012, 05:45 PM

RE: 7,5 mm Element design for high performance engine - by hooblah - 11-27-2012, 06:07 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 11:14 AM

RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-29-2012, 03:52 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 03:55 PM

RE: 7,5 mm Element design for high performance engine - by 300SD81 - 11-29-2012, 11:21 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 11:25 AM

RE: 7,5 mm Element design for high performance engine - by majesty78 - 11-29-2012, 01:27 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 01:42 PM

RE: 7,5 mm Element design for high performance engine - by hansebanger77 - 11-29-2012, 04:23 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 04:32 PM

RE: 7,5 mm Element design for high performance engine - by hansebanger77 - 12-01-2012, 03:00 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 12-02-2012, 09:05 AM

RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-30-2012, 03:00 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 12-01-2012, 09:58 AM

RE: 7,5 mm Element design for high performance engine - by maKe- - 12-02-2012, 07:21 PM

RE: 7,5 mm Element design for high performance engine - by majesty78 - 12-11-2012, 05:49 AM

RE: 7,5 mm Element design for high performance engine - by BigAssCFotPrint - 12-11-2012, 09:50 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 12-20-2012, 11:00 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 01-21-2013, 01:51 AM

RE: 7,5 mm Element design for high performance engine - by raysorenson - 01-21-2013, 06:34 PM

RE: 7,5 mm Element design for high performance engine - by swecias - 03-03-2013, 12:58 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-26-2013, 08:04 AM

RE: 7,5 mm Element design for high performance engine - by Duncansport - 04-26-2013, 08:11 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 04-26-2013, 08:18 AM

RE: 7,5 mm Element design for high performance engine - by Duncansport - 04-26-2013, 08:36 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 04-26-2013, 08:41 AM

RE: 7,5 mm Element design for high performance engine - by frodes - 04-26-2013, 04:57 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 04-27-2013, 02:43 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-27-2013, 05:25 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 04-26-2013, 04:55 PM

RE: 7,5 mm Element design for high performance engine - by Duncansport - 04-26-2013, 08:12 PM

RE: 7,5 mm Element design for high performance engine - by HaavardPYA - 04-27-2013, 06:37 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 04-27-2013, 05:09 PM

RE: 7,5 mm Element design for high performance engine - by Stamsaas - 04-29-2013, 10:33 AM

RE: 7,5 mm Element design for high performance engine - by lgreeley83 - 04-29-2013, 11:54 AM

RE: 7,5 mm Element design for high performance engine - by Stamsaas - 04-30-2013, 04:23 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-06-2013, 01:08 PM

RE: 7,5 mm Element design for high performance engine - by Stamsaas - 05-06-2013, 02:23 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 05-06-2013, 04:00 PM

RE: 7,5 mm Element design for high performance engine - by HaavardPYA - 05-06-2013, 04:04 PM

RE: 7,5 mm Element design for high performance engine - by Njdub - 05-06-2013, 08:53 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-12-2013, 01:46 PM

RE: 7,5 mm Element design for high performance engine - by hansebanger77 - 06-12-2013, 02:12 PM

RE: 7,5 mm Element design for high performance engine - by Duncansport - 06-12-2013, 03:15 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 06-12-2013, 04:45 PM

RE: 7,5 mm Element design for high performance engine - by MFSuper90 - 06-12-2013, 09:08 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 06-13-2013, 03:32 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-13-2013, 09:56 AM

RE: 7,5 mm Element design for high performance engine - by squirrelmaster - 06-13-2013, 03:21 PM

RE: 7,5 mm Element design for high performance engine - by Bangaway - 06-13-2013, 08:12 PM

RE: 7,5 mm Element design for high performance engine - by Alastair E - 06-14-2013, 10:09 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 06-14-2013, 12:03 PM

RE: 7,5 mm Element design for high performance engine - by maKe- - 06-17-2013, 07:35 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-17-2013, 09:58 AM

RE: 7,5 mm Element design for high performance engine - by maKe- - 06-17-2013, 11:56 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-19-2013, 10:14 AM

RE: 7,5 mm Element design for high performance engine - by Duncansport - 06-19-2013, 11:18 AM

RE: 7,5 mm Element design for high performance engine - by willbhere4u - 06-19-2013, 10:32 AM

RE: 7,5 mm Element design for high performance engine - by Alastair E - 06-19-2013, 11:28 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 06-19-2013, 05:35 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-19-2013, 11:39 PM

RE: 7,5 mm Element design for high performance engine - by majesty78 - 06-21-2013, 06:20 AM

RE: 7,5 mm Element design for high performance engine - by yankneck696 - 06-21-2013, 07:31 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-28-2013, 08:42 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 06-28-2013, 11:55 AM

RE: 7,5 mm Element design for high performance engine - by barrote - 07-01-2013, 11:58 AM

RE: 7,5 mm Element design for high performance engine - by sorin_cel - 07-07-2013, 02:51 PM

RE: 7,5 mm Element design for high performance engine - by ErikT - 07-10-2013, 03:39 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 07-10-2013, 09:47 PM

RE: 7,5 mm Element design for high performance engine - by Domino81 - 07-17-2013, 06:56 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-17-2013, 10:40 AM

RE: 7,5 mm Element design for high performance engine - by yankneck696 - 07-18-2013, 08:12 AM

RE: 7,5 mm Element design for high performance engine - by Domino81 - 07-18-2013, 01:59 PM

RE: 7,5 mm Element design for high performance engine - by maxypriest - 07-18-2013, 05:59 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 07-19-2013, 04:02 AM

RE: 7,5 mm Element design for high performance engine - by HaavardPYA - 07-19-2013, 10:13 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 07-19-2013, 01:48 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-21-2013, 09:09 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 07-22-2013, 02:58 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 07-27-2013, 03:23 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 07-28-2013, 08:20 AM

RE: 7,5 mm Element design for high performance engine - by maxypriest - 07-23-2013, 08:36 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 07-23-2013, 12:34 PM

RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 07-26-2013, 06:43 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-06-2013, 07:17 AM

RE: 7,5 mm Element design for high performance engine - by hooblah - 09-06-2013, 10:39 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 09-06-2013, 01:26 PM

RE: 7,5 mm Element design for high performance engine - by 300SD_KY - 01-21-2014, 05:41 PM

RE: 7,5 mm Element design for high performance engine - by F.R.A.S - 01-23-2014, 09:33 AM

RE: 7,5 mm Element design for high performance engine - by baldur - 02-03-2014, 09:19 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 02-03-2014, 12:43 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-28-2014, 11:10 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 04-28-2014, 02:48 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-03-2014, 06:49 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-26-2014, 02:56 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 06-26-2014, 04:39 PM

RE: 7,5 mm Element design for high performance engine - by MFSuper90 - 06-26-2014, 05:00 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-27-2014, 01:58 AM

RE: 7,5 mm Element design for high performance engine - by Gearbound - 06-26-2014, 05:08 PM

RE: 7,5 mm Element design for high performance engine - by DiseaselWeasel - 06-27-2014, 03:19 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-27-2014, 03:42 AM

RE: 7,5 mm Element design for high performance engine - by DiseaselWeasel - 06-27-2014, 04:37 AM

RE: 7,5 mm Element design for high performance engine - by Spoolin - 09-08-2016, 12:11 PM

Users browsing this thread:
7 Guest(s)

Users browsing this thread:
7 Guest(s)