7,5 mm Element design for high performance engine
7,5 mm Element design for high performance engine
03-29-2012, 10:19 AM
#97
With respect--You Also Need AIR to fully utilise that extra fuel!
Excess fuel over and above what can efficiently be burned will just give high EGT's, Huge Smoke, and Possible Engine damage which is cumulative.
Also, with the Quantity Injected, the Injection Duration is MOST important. Long periods of injection means last fuel is injected Too Late to be efficiently burned, so just goes to make Smoke, High EGT's etc and not more power--This is why a larger Element is needed for proper power gains--The smaller element may supply the same amount at a certain rack-position--But In a MUCH LONGER time/crank-angle in degrees, so Thats where it all 'goes wrong' for power gains....
No amount of Turbo Pressure will help this situation, as the crank has gone past the point where Max Pressure Should be developed, --Because the Injection Phase for the extra fuel with the small element is Too Long....
Modifying the Camshaft in the pump isnt such a great idea. Mainly due to the stresses involved. Yes--such cam alterations can be done--but the material the cam is made from is incredibly hard--It Needs to be for the fast rise-time--which even stock is practically a flat surface.
To modify or make new due to this is a very expensive proposition--And, Not really needed unless you make a dragster and a pump that needs new cams every 1000 miles!
A Properly Designed and sized Plunger and barrel (Element) will achieve the same--but better, as the stresses of cam/roller are kept within safe limits
tThis is what Goran and Tomnik are doing with their custom designed elements.
Goran--At a total Wild Guess with no reference to anything, 35 degrees--or thereabouts....(Too Long IMHO!)
--I'm Guessing that all injected should be completed under say--25 degrees or so....
This post was last modified: 03-29-2012, 10:35 AM by Alastair E.
![[Image: 300TDnoplate.jpg]](http://i190.photobucket.com/albums/z128/alastairhcii/300TDnoplate.jpg)
Alastair E
03-29-2012, 10:19 AM #97Dieselmerc...
With respect--You Also Need AIR to fully utilise that extra fuel!
Excess fuel over and above what can efficiently be burned will just give high EGT's, Huge Smoke, and Possible Engine damage which is cumulative.
Also, with the Quantity Injected, the Injection Duration is MOST important. Long periods of injection means last fuel is injected Too Late to be efficiently burned, so just goes to make Smoke, High EGT's etc and not more power--This is why a larger Element is needed for proper power gains--The smaller element may supply the same amount at a certain rack-position--But In a MUCH LONGER time/crank-angle in degrees, so Thats where it all 'goes wrong' for power gains....
No amount of Turbo Pressure will help this situation, as the crank has gone past the point where Max Pressure Should be developed, --Because the Injection Phase for the extra fuel with the small element is Too Long....
Modifying the Camshaft in the pump isnt such a great idea. Mainly due to the stresses involved. Yes--such cam alterations can be done--but the material the cam is made from is incredibly hard--It Needs to be for the fast rise-time--which even stock is practically a flat surface.
To modify or make new due to this is a very expensive proposition--And, Not really needed unless you make a dragster and a pump that needs new cams every 1000 miles!
A Properly Designed and sized Plunger and barrel (Element) will achieve the same--but better, as the stresses of cam/roller are kept within safe limits
tThis is what Goran and Tomnik are doing with their custom designed elements.
Goran--At a total Wild Guess with no reference to anything, 35 degrees--or thereabouts....(Too Long IMHO!)
--I'm Guessing that all injected should be completed under say--25 degrees or so....
Messages In This Thread
7,5 mm Element design for high performance engine - by dieselmeken - 02-27-2012, 02:43 PM
RE: 7,5 mm Element design for high performance engine - by Palmer - 02-27-2012, 03:45 PM
RE: 7,5 mm Element design for high performance engine - by willbhere4u - 02-27-2012, 04:37 PM
RE: 7,5 mm Element design for high performance engine - by Booster - 02-27-2012, 06:04 PM
RE: 7,5 mm Element design for high performance engine - by w123love - 02-27-2012, 08:28 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 02-27-2012, 09:10 PM
RE: 7,5 mm Element design for high performance engine - by pp d - 02-28-2012, 01:39 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 02-28-2012, 02:13 AM
RE: 7,5 mm Element design for high performance engine - by barrote - 02-28-2012, 05:38 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 02-28-2012, 05:26 PM
RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 02-29-2012, 12:13 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 02-28-2012, 11:22 PM
RE: 7,5 mm Element design for high performance engine - by Simpler=Better - 02-28-2012, 10:31 AM
RE: 7,5 mm Element design for high performance engine - by w210tdt - 02-28-2012, 01:04 PM
RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 02-28-2012, 01:21 PM
RE: 7,5 mm Element design for high performance engine - by 2996 - 02-28-2012, 01:22 PM
RE: 7,5 mm Element design for high performance engine - by huseyin55amg - 02-28-2012, 01:58 PM
RE: 7,5 mm Element design for high performance engine - by Captain America - 02-29-2012, 01:25 AM
RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 02-29-2012, 12:31 PM
RE: 7,5 mm Element design for high performance engine - by aaa - 02-29-2012, 03:47 PM
RE: 7,5 mm Element design for high performance engine - by w123love - 02-29-2012, 09:42 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 03-01-2012, 12:58 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-01-2012, 01:41 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 03-01-2012, 07:29 PM
RE: 7,5 mm Element design for high performance engine - by aaa - 03-01-2012, 07:43 PM
RE: 7,5 mm Element design for high performance engine - by w123love - 03-01-2012, 09:33 PM
RE: 7,5 mm Element design for high performance engine - by SurfRodder - 03-02-2012, 10:18 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-04-2012, 08:34 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 03-05-2012, 05:20 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-05-2012, 07:51 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 03-06-2012, 09:43 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-07-2012, 02:22 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-04-2012, 01:59 PM
RE: 7,5 mm Element design for high performance engine - by squirrelmaster - 03-04-2012, 04:47 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-05-2012, 06:00 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 03-05-2012, 04:15 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-06-2012, 01:29 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 03-06-2012, 02:40 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-06-2012, 04:14 PM
RE: 7,5 mm Element design for high performance engine - by iheartboost - 03-07-2012, 09:37 AM
RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 03-07-2012, 10:44 PM
RE: 7,5 mm Element design for high performance engine - by jonbobshinigin - 03-07-2012, 11:09 PM
RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 03-08-2012, 02:44 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-08-2012, 05:05 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-08-2012, 07:40 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-08-2012, 08:19 AM
RE: 7,5 mm Element design for high performance engine - by Savitas - 03-09-2012, 04:01 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-11-2012, 11:51 AM
RE: 7,5 mm Element design for high performance engine - by winmutt - 03-15-2012, 06:33 PM
RE: 7,5 mm Element design for high performance engine - by iheartboost - 03-08-2012, 08:02 PM
RE: 7,5 mm Element design for high performance engine - by diesel2fast4u - 03-09-2012, 02:16 AM
RE: 7,5 mm Element design for high performance engine - by George3soccer - 03-09-2012, 08:54 AM
RE: 7,5 mm Element design for high performance engine - by Alastair E - 03-13-2012, 06:15 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-13-2012, 07:37 AM
RE: 7,5 mm Element design for high performance engine - by Twinturboguy - 03-14-2012, 12:16 PM
RE: 7,5 mm Element design for high performance engine - by W126Lover - 03-18-2012, 12:22 AM
RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 03-18-2012, 01:04 AM
RE: 7,5 mm Element design for high performance engine - by pp d - 03-18-2012, 10:29 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-21-2012, 04:09 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-21-2012, 04:54 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-21-2012, 05:40 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-21-2012, 05:48 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-21-2012, 07:55 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-21-2012, 08:45 AM
RE: 7,5 mm Element design for high performance engine - by winmutt - 03-21-2012, 09:14 PM
RE: 7,5 mm Element design for high performance engine - by Twinturboguy - 03-21-2012, 07:40 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-21-2012, 09:00 AM
RE: 7,5 mm Element design for high performance engine - by yankneck696 - 03-21-2012, 04:49 PM
RE: 7,5 mm Element design for high performance engine - by ErikT - 03-21-2012, 05:04 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 03-21-2012, 05:31 PM
RE: 7,5 mm Element design for high performance engine - by pp d - 03-22-2012, 01:02 AM
RE: 7,5 mm Element design for high performance engine - by winmutt - 03-24-2012, 08:45 AM
RE: 7,5 mm Element design for high performance engine - by Booster - 03-22-2012, 11:04 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-22-2012, 01:36 PM
RE: 7,5 mm Element design for high performance engine - by erling66 - 03-23-2012, 04:09 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-23-2012, 07:03 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 03-23-2012, 02:34 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-23-2012, 02:17 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-23-2012, 04:07 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 03-23-2012, 05:57 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 03-24-2012, 12:21 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-24-2012, 04:43 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 03-24-2012, 02:51 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 03-25-2012, 03:03 PM
RE: 7,5 mm Element design for high performance engine - by jeemu - 03-26-2012, 02:32 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 03-26-2012, 06:04 PM
RE: 7,5 mm Element design for high performance engine - by Savitas - 03-27-2012, 02:41 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 03-28-2012, 06:10 AM
RE: 7,5 mm Element design for high performance engine - by Savitas - 03-28-2012, 07:47 AM
RE: 7,5 mm Element design for high performance engine - by Alastair E - 03-28-2012, 11:16 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-28-2012, 12:29 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-28-2012, 02:19 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-29-2012, 10:02 AM
RE: 7,5 mm Element design for high performance engine - by JustPassinThru - 03-28-2012, 11:28 AM
RE: 7,5 mm Element design for high performance engine - by erling66 - 03-28-2012, 03:29 PM
RE: 7,5 mm Element design for high performance engine - by Simpler=Better - 03-28-2012, 03:32 PM
RE: 7,5 mm Element design for high performance engine - by Alastair E - 03-29-2012, 10:19 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-29-2012, 04:46 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 03-29-2012, 11:59 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-30-2012, 02:16 AM
RE: 7,5 mm Element design for high performance engine - by swecias - 04-01-2012, 03:30 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-30-2012, 04:57 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 03-30-2012, 05:15 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 03-31-2012, 01:21 AM
RE: 7,5 mm Element design for high performance engine - by erling66 - 03-31-2012, 02:40 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 03-31-2012, 02:11 PM
RE: 7,5 mm Element design for high performance engine - by erling66 - 04-01-2012, 03:07 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 04-01-2012, 09:23 AM
RE: 7,5 mm Element design for high performance engine - by erling66 - 04-01-2012, 01:43 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 04-02-2012, 08:50 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-02-2012, 10:56 AM
RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 04-02-2012, 09:33 PM
RE: 7,5 mm Element design for high performance engine - by yankneck696 - 04-02-2012, 05:47 PM
RE: 7,5 mm Element design for high performance engine - by 2996 - 04-03-2012, 12:13 PM
RE: 7,5 mm Element design for high performance engine - by lgreeley83 - 04-03-2012, 12:48 PM
RE: 7,5 mm Element design for high performance engine - by iheartboost - 04-03-2012, 09:13 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-05-2012, 01:55 PM
RE: 7,5 mm Element design for high performance engine - by iheartboost - 04-05-2012, 07:05 PM
RE: 7,5 mm Element design for high performance engine - by Captain America - 04-09-2012, 03:29 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-09-2012, 03:36 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-11-2012, 01:00 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 04-11-2012, 03:25 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-17-2012, 12:12 AM
RE: 7,5 mm Element design for high performance engine - by Volker407 - 05-28-2012, 04:20 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-28-2012, 09:45 AM
RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 04-17-2012, 01:54 AM
RE: 7,5 mm Element design for high performance engine - by winmutt - 04-19-2012, 04:54 PM
RE: 7,5 mm Element design for high performance engine - by yatzee - 04-19-2012, 04:56 PM
RE: 7,5 mm Element design for high performance engine - by 300SD_KY - 04-20-2012, 08:16 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 04-27-2012, 05:56 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-27-2012, 06:29 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 04-27-2012, 06:35 AM
RE: 7,5 mm Element design for high performance engine - by winmutt - 04-27-2012, 05:38 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 05-01-2012, 09:51 AM
RE: 7,5 mm Element design for high performance engine - by swecias - 05-01-2012, 03:30 PM
RE: 7,5 mm Element design for high performance engine - by Diesel-Wiking - 05-01-2012, 04:08 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-02-2012, 02:21 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 05-04-2012, 08:05 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-04-2012, 10:19 AM
RE: 7,5 mm Element design for high performance engine - by George3soccer - 05-04-2012, 11:45 AM
RE: 7,5 mm Element design for high performance engine - by swecias - 05-04-2012, 12:59 PM
RE: 7,5 mm Element design for high performance engine - by bricktron - 05-06-2012, 01:39 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-11-2012, 11:11 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 05-13-2012, 09:49 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-22-2012, 04:41 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 05-22-2012, 06:32 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 05-22-2012, 02:36 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-23-2012, 01:23 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 05-30-2012, 10:41 AM
RE: 7,5 mm Element design for high performance engine - by W126Lover - 07-17-2012, 12:03 AM
RE: 7,5 mm Element design for high performance engine - by _siim_ - 07-17-2012, 08:35 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-17-2012, 01:03 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 07-19-2012, 06:05 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-19-2012, 12:12 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 07-19-2012, 03:02 PM
RE: 7,5 mm Element design for high performance engine - by Riverstick - 07-19-2012, 12:53 PM
RE: 7,5 mm Element design for high performance engine - by Spaceraver - 07-18-2012, 01:42 PM
RE: 7,5 mm Element design for high performance engine - by Greazzer - 07-19-2012, 07:34 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 07-20-2012, 12:27 AM
RE: 7,5 mm Element design for high performance engine - by Turbo - 07-20-2012, 09:38 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 07-20-2012, 01:44 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 07-20-2012, 02:53 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 07-21-2012, 12:01 AM
RE: 7,5 mm Element design for high performance engine - by Turbo - 07-21-2012, 03:53 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 07-22-2012, 02:20 AM
RE: 7,5 mm Element design for high performance engine - by frodes - 08-02-2012, 09:27 AM
RE: 7,5 mm Element design for high performance engine - by Greazzer - 07-20-2012, 10:36 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-06-2012, 01:04 PM
RE: 7,5 mm Element design for high performance engine - by Gearbound - 08-06-2012, 01:52 PM
RE: 7,5 mm Element design for high performance engine - by aaa - 08-06-2012, 11:38 PM
RE: 7,5 mm Element design for high performance engine - by frodes - 08-07-2012, 03:38 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-07-2012, 12:52 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 08-07-2012, 05:34 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-08-2012, 10:16 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 08-08-2012, 10:24 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-08-2012, 11:08 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 08-08-2012, 04:42 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-08-2012, 01:23 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 08-08-2012, 02:33 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-08-2012, 03:35 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-09-2012, 03:00 AM
RE: 7,5 mm Element design for high performance engine - by Turbo - 08-09-2012, 06:51 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-10-2012, 10:11 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 08-10-2012, 04:04 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 08-10-2012, 05:36 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-13-2012, 12:41 PM
RE: 7,5 mm Element design for high performance engine - by jeemu - 08-09-2012, 12:16 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-09-2012, 02:06 PM
RE: 7,5 mm Element design for high performance engine - by mercemann - 08-12-2012, 06:17 AM
RE: 7,5 mm Element design for high performance engine - by Mark_M - 08-12-2012, 08:36 AM
RE: 7,5 mm Element design for high performance engine - by mercemann - 08-12-2012, 10:47 AM
RE: 7,5 mm Element design for high performance engine - by Gearbound - 08-13-2012, 09:09 AM
RE: 7,5 mm Element design for high performance engine - by ronnie - 08-13-2012, 11:35 AM
RE: 7,5 mm Element design for high performance engine - by frodes - 08-13-2012, 02:03 PM
RE: 7,5 mm Element design for high performance engine - by mercemann - 08-13-2012, 03:57 PM
RE: 7,5 mm Element design for high performance engine - by frodes - 08-13-2012, 04:00 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 08-14-2012, 01:28 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 08-14-2012, 12:46 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-14-2012, 05:28 AM
RE: 7,5 mm Element design for high performance engine - by mercemann - 08-15-2012, 12:40 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-14-2012, 08:46 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-15-2012, 12:09 PM
RE: 7,5 mm Element design for high performance engine - by 300SD_KY - 08-17-2012, 09:18 AM
RE: 7,5 mm Element design for high performance engine - by RICHIS - 08-17-2012, 05:23 PM
RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 08-18-2012, 11:52 AM
RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 08-18-2012, 08:38 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 08-20-2012, 08:58 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 08-20-2012, 09:36 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 08-22-2012, 06:09 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-09-2012, 03:24 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 09-09-2012, 01:46 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-10-2012, 06:01 AM
RE: 7,5 mm Element design for high performance engine - by winmutt - 09-09-2012, 09:17 PM
RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 09-09-2012, 10:33 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 09-10-2012, 09:14 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 09-10-2012, 06:21 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 09-12-2012, 04:29 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 09-10-2012, 11:12 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-11-2012, 04:07 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 09-12-2012, 02:40 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-12-2012, 03:55 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 09-12-2012, 04:27 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 10-18-2012, 09:10 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 10-19-2012, 10:17 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 10-20-2012, 03:40 PM
RE: 7,5 mm Element design for high performance engine - by huseyin55amg - 10-25-2012, 03:22 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 10-27-2012, 04:09 AM
RE: 7,5 mm Element design for high performance engine - by huseyin55amg - 10-28-2012, 01:31 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 11:16 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 11-02-2012, 11:18 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 11:54 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 11-02-2012, 11:58 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 01:04 PM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-07-2012, 04:30 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-08-2012, 12:31 AM
RE: 7,5 mm Element design for high performance engine - by Turbo - 11-08-2012, 07:38 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-09-2012, 04:19 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 11-02-2012, 02:01 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 02:26 PM
RE: 7,5 mm Element design for high performance engine - by yankneck696 - 11-02-2012, 06:45 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 11-02-2012, 08:12 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 11-03-2012, 08:20 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-03-2012, 10:47 AM
RE: 7,5 mm Element design for high performance engine - by winmutt - 11-03-2012, 06:10 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 11-03-2012, 07:33 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 11-06-2012, 05:58 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-06-2012, 02:57 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 11-06-2012, 08:18 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 11-06-2012, 11:05 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 11-07-2012, 05:10 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-10-2012, 12:19 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 11-10-2012, 01:58 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-10-2012, 03:35 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 11-10-2012, 03:36 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-11-2012, 12:37 PM
RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-12-2012, 05:51 AM
RE: 7,5 mm Element design for high performance engine - by raidaru - 11-12-2012, 12:33 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-13-2012, 12:28 PM
RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-15-2012, 09:05 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 10:44 AM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 10:44 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 11:02 AM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 11:10 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 11:14 AM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 11:17 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 11:22 AM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:09 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 12:11 PM
RE: 7,5 mm Element design for high performance engine - by erling66 - 11-15-2012, 11:24 AM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:12 PM
RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-17-2012, 04:18 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 12:21 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-15-2012, 03:27 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:21 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 12:26 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:32 PM
RE: 7,5 mm Element design for high performance engine - by Savitas - 11-15-2012, 02:29 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 02:54 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 04:13 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 04:16 PM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-15-2012, 04:28 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 04:59 PM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-16-2012, 01:45 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-16-2012, 02:34 PM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-16-2012, 03:30 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-16-2012, 04:07 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 11-16-2012, 04:10 PM
RE: 7,5 mm Element design for high performance engine - by erling66 - 11-16-2012, 04:17 AM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-16-2012, 07:00 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-16-2012, 08:30 AM
RE: 7,5 mm Element design for high performance engine - by erling66 - 11-16-2012, 11:38 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-16-2012, 04:42 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 11-16-2012, 04:56 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-18-2012, 08:45 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-17-2012, 07:17 AM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-17-2012, 08:47 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-17-2012, 09:14 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-17-2012, 05:12 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-17-2012, 05:16 PM
RE: 7,5 mm Element design for high performance engine - by erling66 - 11-18-2012, 12:15 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-18-2012, 12:22 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 01:18 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-22-2012, 01:26 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 03:20 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 11-22-2012, 03:14 PM
RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-17-2012, 07:07 PM
RE: 7,5 mm Element design for high performance engine - by raysorenson - 11-17-2012, 08:50 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-22-2012, 03:36 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 07:10 PM
RE: 7,5 mm Element design for high performance engine - by erling66 - 11-24-2012, 01:24 PM
RE: 7,5 mm Element design for high performance engine - by Mark_M - 11-22-2012, 07:34 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 07:39 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-23-2012, 03:31 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-23-2012, 05:06 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 11-23-2012, 08:37 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-24-2012, 12:14 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-24-2012, 07:05 AM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-25-2012, 09:17 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-24-2012, 01:09 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-24-2012, 01:19 PM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-24-2012, 03:50 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-24-2012, 05:42 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-24-2012, 06:49 PM
RE: 7,5 mm Element design for high performance engine - by 300SD81 - 11-25-2012, 11:37 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-25-2012, 03:54 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-26-2012, 02:55 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-26-2012, 12:16 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-26-2012, 12:41 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-26-2012, 12:56 PM
RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-27-2012, 03:11 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-27-2012, 03:45 PM
RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-27-2012, 05:39 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-27-2012, 05:45 PM
RE: 7,5 mm Element design for high performance engine - by hooblah - 11-27-2012, 06:07 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 11:14 AM
RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-29-2012, 03:52 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 03:55 PM
RE: 7,5 mm Element design for high performance engine - by 300SD81 - 11-29-2012, 11:21 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 11:25 AM
RE: 7,5 mm Element design for high performance engine - by majesty78 - 11-29-2012, 01:27 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 01:42 PM
RE: 7,5 mm Element design for high performance engine - by hansebanger77 - 11-29-2012, 04:23 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 04:32 PM
RE: 7,5 mm Element design for high performance engine - by hansebanger77 - 12-01-2012, 03:00 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 12-02-2012, 09:05 AM
RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-30-2012, 03:00 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 12-01-2012, 09:58 AM
RE: 7,5 mm Element design for high performance engine - by maKe- - 12-02-2012, 07:21 PM
RE: 7,5 mm Element design for high performance engine - by majesty78 - 12-11-2012, 05:49 AM
RE: 7,5 mm Element design for high performance engine - by BigAssCFotPrint - 12-11-2012, 09:50 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 12-20-2012, 11:00 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 01-21-2013, 01:51 AM
RE: 7,5 mm Element design for high performance engine - by raysorenson - 01-21-2013, 06:34 PM
RE: 7,5 mm Element design for high performance engine - by swecias - 03-03-2013, 12:58 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-26-2013, 08:04 AM
RE: 7,5 mm Element design for high performance engine - by Duncansport - 04-26-2013, 08:11 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 04-26-2013, 08:18 AM
RE: 7,5 mm Element design for high performance engine - by Duncansport - 04-26-2013, 08:36 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 04-26-2013, 08:41 AM
RE: 7,5 mm Element design for high performance engine - by frodes - 04-26-2013, 04:57 PM
RE: 7,5 mm Element design for high performance engine - by erling66 - 04-27-2013, 02:43 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-27-2013, 05:25 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 04-26-2013, 04:55 PM
RE: 7,5 mm Element design for high performance engine - by Duncansport - 04-26-2013, 08:12 PM
RE: 7,5 mm Element design for high performance engine - by HaavardPYA - 04-27-2013, 06:37 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 04-27-2013, 05:09 PM
RE: 7,5 mm Element design for high performance engine - by Stamsaas - 04-29-2013, 10:33 AM
RE: 7,5 mm Element design for high performance engine - by lgreeley83 - 04-29-2013, 11:54 AM
RE: 7,5 mm Element design for high performance engine - by Stamsaas - 04-30-2013, 04:23 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-06-2013, 01:08 PM
RE: 7,5 mm Element design for high performance engine - by Stamsaas - 05-06-2013, 02:23 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 05-06-2013, 04:00 PM
RE: 7,5 mm Element design for high performance engine - by HaavardPYA - 05-06-2013, 04:04 PM
RE: 7,5 mm Element design for high performance engine - by Njdub - 05-06-2013, 08:53 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-12-2013, 01:46 PM
RE: 7,5 mm Element design for high performance engine - by hansebanger77 - 06-12-2013, 02:12 PM
RE: 7,5 mm Element design for high performance engine - by Duncansport - 06-12-2013, 03:15 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 06-12-2013, 04:45 PM
RE: 7,5 mm Element design for high performance engine - by MFSuper90 - 06-12-2013, 09:08 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 06-13-2013, 03:32 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-13-2013, 09:56 AM
RE: 7,5 mm Element design for high performance engine - by squirrelmaster - 06-13-2013, 03:21 PM
RE: 7,5 mm Element design for high performance engine - by Bangaway - 06-13-2013, 08:12 PM
RE: 7,5 mm Element design for high performance engine - by Alastair E - 06-14-2013, 10:09 AM
RE: 7,5 mm Element design for high performance engine - by winmutt - 06-14-2013, 12:03 PM
RE: 7,5 mm Element design for high performance engine - by maKe- - 06-17-2013, 07:35 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-17-2013, 09:58 AM
RE: 7,5 mm Element design for high performance engine - by maKe- - 06-17-2013, 11:56 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-19-2013, 10:14 AM
RE: 7,5 mm Element design for high performance engine - by Duncansport - 06-19-2013, 11:18 AM
RE: 7,5 mm Element design for high performance engine - by willbhere4u - 06-19-2013, 10:32 AM
RE: 7,5 mm Element design for high performance engine - by Alastair E - 06-19-2013, 11:28 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 06-19-2013, 05:35 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-19-2013, 11:39 PM
RE: 7,5 mm Element design for high performance engine - by majesty78 - 06-21-2013, 06:20 AM
RE: 7,5 mm Element design for high performance engine - by yankneck696 - 06-21-2013, 07:31 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-28-2013, 08:42 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 06-28-2013, 11:55 AM
RE: 7,5 mm Element design for high performance engine - by barrote - 07-01-2013, 11:58 AM
RE: 7,5 mm Element design for high performance engine - by sorin_cel - 07-07-2013, 02:51 PM
RE: 7,5 mm Element design for high performance engine - by ErikT - 07-10-2013, 03:39 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 07-10-2013, 09:47 PM
RE: 7,5 mm Element design for high performance engine - by Domino81 - 07-17-2013, 06:56 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-17-2013, 10:40 AM
RE: 7,5 mm Element design for high performance engine - by yankneck696 - 07-18-2013, 08:12 AM
RE: 7,5 mm Element design for high performance engine - by Domino81 - 07-18-2013, 01:59 PM
RE: 7,5 mm Element design for high performance engine - by maxypriest - 07-18-2013, 05:59 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 07-19-2013, 04:02 AM
RE: 7,5 mm Element design for high performance engine - by HaavardPYA - 07-19-2013, 10:13 AM
RE: 7,5 mm Element design for high performance engine - by Turbo - 07-19-2013, 01:48 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-21-2013, 09:09 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 07-22-2013, 02:58 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 07-27-2013, 03:23 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 07-28-2013, 08:20 AM
RE: 7,5 mm Element design for high performance engine - by maxypriest - 07-23-2013, 08:36 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 07-23-2013, 12:34 PM
RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 07-26-2013, 06:43 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-06-2013, 07:17 AM
RE: 7,5 mm Element design for high performance engine - by hooblah - 09-06-2013, 10:39 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 09-06-2013, 01:26 PM
RE: 7,5 mm Element design for high performance engine - by 300SD_KY - 01-21-2014, 05:41 PM
RE: 7,5 mm Element design for high performance engine - by F.R.A.S - 01-23-2014, 09:33 AM
RE: 7,5 mm Element design for high performance engine - by baldur - 02-03-2014, 09:19 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 02-03-2014, 12:43 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-28-2014, 11:10 AM
RE: 7,5 mm Element design for high performance engine - by Turbo - 04-28-2014, 02:48 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-03-2014, 06:49 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-26-2014, 02:56 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 06-26-2014, 04:39 PM
RE: 7,5 mm Element design for high performance engine - by MFSuper90 - 06-26-2014, 05:00 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-27-2014, 01:58 AM
RE: 7,5 mm Element design for high performance engine - by Gearbound - 06-26-2014, 05:08 PM
RE: 7,5 mm Element design for high performance engine - by DiseaselWeasel - 06-27-2014, 03:19 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-27-2014, 03:42 AM
RE: 7,5 mm Element design for high performance engine - by DiseaselWeasel - 06-27-2014, 04:37 AM
RE: 7,5 mm Element design for high performance engine - by Spoolin - 09-08-2016, 12:11 PM
Users browsing this thread:
12 Guest(s)
12 Guest(s)
Users browsing this thread:
12 Guest(s)
12 Guest(s)