7,5 mm Element design for high performance engine

STD Tuning Engine 7,5 mm Element design for high performance engine

7,5 mm Element design for high performance engine

7,5 mm Element design for high performance engine

View a Printable Version

5 Vote(s) - 4.8 Average

tomnik

Holset

587

03-24-2012, 12:21 AM #80

(03-23-2012, 05:57 PM)mantahead modifing the cam can give more fuel and shorter duration which will decrease EGTs
Am i correct?????

correct,

BUT: modifying the cam profile for more and faster delivery will damage the pump. A "harder" cam profile will need harder springs to keep the roller on the cam. The cam profile gives the plunger speed. You want slow speed near bottom position to allow fuel getting into the element. Near end of injection you also want slow plunger speed to avoid excessive wear due to cavitation.

Maybe o.k. for tractor pullers but never for a car that should make it more than just some hundreds of meters.

The one and only technical correct solution is increasing the element diameter.

Tom

tomnik

03-24-2012, 12:21 AM #80

(03-23-2012, 05:57 PM)mantahead modifing the cam can give more fuel and shorter duration which will decrease EGTs
Am i correct?????

correct,

BUT: modifying the cam profile for more and faster delivery will damage the pump. A "harder" cam profile will need harder springs to keep the roller on the cam. The cam profile gives the plunger speed. You want slow speed near bottom position to allow fuel getting into the element. Near end of injection you also want slow plunger speed to avoid excessive wear due to cavitation.

Maybe o.k. for tractor pullers but never for a car that should make it more than just some hundreds of meters.

The one and only technical correct solution is increasing the element diameter.

Tom

View a Printable Version

5 Vote(s) - 4.8 Average

Messages In This Thread

7,5 mm Element design for high performance engine - by dieselmeken - 02-27-2012, 02:43 PM

RE: 7,5 mm Element design for high performance engine - by Palmer - 02-27-2012, 03:45 PM

RE: 7,5 mm Element design for high performance engine - by willbhere4u - 02-27-2012, 04:37 PM

RE: 7,5 mm Element design for high performance engine - by Booster - 02-27-2012, 06:04 PM

RE: 7,5 mm Element design for high performance engine - by w123love - 02-27-2012, 08:28 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 02-27-2012, 09:10 PM

RE: 7,5 mm Element design for high performance engine - by pp d - 02-28-2012, 01:39 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 02-28-2012, 02:13 AM

RE: 7,5 mm Element design for high performance engine - by barrote - 02-28-2012, 05:38 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 02-28-2012, 05:26 PM

RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 02-29-2012, 12:13 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 02-28-2012, 11:22 PM

RE: 7,5 mm Element design for high performance engine - by Simpler=Better - 02-28-2012, 10:31 AM

RE: 7,5 mm Element design for high performance engine - by w210tdt - 02-28-2012, 01:04 PM

RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 02-28-2012, 01:21 PM

RE: 7,5 mm Element design for high performance engine - by 2996 - 02-28-2012, 01:22 PM

RE: 7,5 mm Element design for high performance engine - by huseyin55amg - 02-28-2012, 01:58 PM

RE: 7,5 mm Element design for high performance engine - by Captain America - 02-29-2012, 01:25 AM

RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 02-29-2012, 12:31 PM

RE: 7,5 mm Element design for high performance engine - by aaa - 02-29-2012, 03:47 PM

RE: 7,5 mm Element design for high performance engine - by w123love - 02-29-2012, 09:42 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-01-2012, 12:58 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-01-2012, 01:41 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-01-2012, 07:29 PM

RE: 7,5 mm Element design for high performance engine - by aaa - 03-01-2012, 07:43 PM

RE: 7,5 mm Element design for high performance engine - by w123love - 03-01-2012, 09:33 PM

RE: 7,5 mm Element design for high performance engine - by SurfRodder - 03-02-2012, 10:18 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-04-2012, 08:34 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-05-2012, 05:20 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-05-2012, 07:51 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 03-06-2012, 09:43 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-07-2012, 02:22 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-04-2012, 01:59 PM

RE: 7,5 mm Element design for high performance engine - by squirrelmaster - 03-04-2012, 04:47 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-05-2012, 06:00 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 03-05-2012, 04:15 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-06-2012, 01:29 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-06-2012, 02:40 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-06-2012, 04:14 PM

RE: 7,5 mm Element design for high performance engine - by iheartboost - 03-07-2012, 09:37 AM

RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 03-07-2012, 10:44 PM

RE: 7,5 mm Element design for high performance engine - by jonbobshinigin - 03-07-2012, 11:09 PM

RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 03-08-2012, 02:44 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-08-2012, 05:05 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-08-2012, 07:40 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-08-2012, 08:19 AM

RE: 7,5 mm Element design for high performance engine - by Savitas - 03-09-2012, 04:01 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-11-2012, 11:51 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 03-15-2012, 06:33 PM

RE: 7,5 mm Element design for high performance engine - by iheartboost - 03-08-2012, 08:02 PM

RE: 7,5 mm Element design for high performance engine - by diesel2fast4u - 03-09-2012, 02:16 AM

RE: 7,5 mm Element design for high performance engine - by George3soccer - 03-09-2012, 08:54 AM

RE: 7,5 mm Element design for high performance engine - by Alastair E - 03-13-2012, 06:15 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-13-2012, 07:37 AM

RE: 7,5 mm Element design for high performance engine - by Twinturboguy - 03-14-2012, 12:16 PM

RE: 7,5 mm Element design for high performance engine - by W126Lover - 03-18-2012, 12:22 AM

RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 03-18-2012, 01:04 AM

RE: 7,5 mm Element design for high performance engine - by pp d - 03-18-2012, 10:29 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-21-2012, 04:09 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-21-2012, 04:54 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-21-2012, 05:40 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-21-2012, 05:48 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-21-2012, 07:55 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-21-2012, 08:45 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 03-21-2012, 09:14 PM

RE: 7,5 mm Element design for high performance engine - by Twinturboguy - 03-21-2012, 07:40 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-21-2012, 09:00 AM

RE: 7,5 mm Element design for high performance engine - by yankneck696 - 03-21-2012, 04:49 PM

RE: 7,5 mm Element design for high performance engine - by ErikT - 03-21-2012, 05:04 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-21-2012, 05:31 PM

RE: 7,5 mm Element design for high performance engine - by pp d - 03-22-2012, 01:02 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 03-24-2012, 08:45 AM

RE: 7,5 mm Element design for high performance engine - by Booster - 03-22-2012, 11:04 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-22-2012, 01:36 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 03-23-2012, 04:09 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-23-2012, 07:03 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-23-2012, 02:34 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-23-2012, 02:17 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-23-2012, 04:07 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-23-2012, 05:57 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-24-2012, 12:21 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-24-2012, 04:43 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 03-24-2012, 02:51 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-25-2012, 03:03 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 03-26-2012, 02:32 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-26-2012, 06:04 PM

RE: 7,5 mm Element design for high performance engine - by Savitas - 03-27-2012, 02:41 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-28-2012, 06:10 AM

RE: 7,5 mm Element design for high performance engine - by Savitas - 03-28-2012, 07:47 AM

RE: 7,5 mm Element design for high performance engine - by Alastair E - 03-28-2012, 11:16 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-28-2012, 12:29 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-28-2012, 02:19 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-29-2012, 10:02 AM

RE: 7,5 mm Element design for high performance engine - by JustPassinThru - 03-28-2012, 11:28 AM

RE: 7,5 mm Element design for high performance engine - by erling66 - 03-28-2012, 03:29 PM

RE: 7,5 mm Element design for high performance engine - by Simpler=Better - 03-28-2012, 03:32 PM

RE: 7,5 mm Element design for high performance engine - by Alastair E - 03-29-2012, 10:19 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-29-2012, 04:46 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-29-2012, 11:59 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-30-2012, 02:16 AM

RE: 7,5 mm Element design for high performance engine - by swecias - 04-01-2012, 03:30 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-30-2012, 04:57 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-30-2012, 05:15 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-31-2012, 01:21 AM

RE: 7,5 mm Element design for high performance engine - by erling66 - 03-31-2012, 02:40 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-31-2012, 02:11 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 04-01-2012, 03:07 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 04-01-2012, 09:23 AM

RE: 7,5 mm Element design for high performance engine - by erling66 - 04-01-2012, 01:43 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 04-02-2012, 08:50 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-02-2012, 10:56 AM

RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 04-02-2012, 09:33 PM

RE: 7,5 mm Element design for high performance engine - by yankneck696 - 04-02-2012, 05:47 PM

RE: 7,5 mm Element design for high performance engine - by 2996 - 04-03-2012, 12:13 PM

RE: 7,5 mm Element design for high performance engine - by lgreeley83 - 04-03-2012, 12:48 PM

RE: 7,5 mm Element design for high performance engine - by iheartboost - 04-03-2012, 09:13 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-05-2012, 01:55 PM

RE: 7,5 mm Element design for high performance engine - by iheartboost - 04-05-2012, 07:05 PM

RE: 7,5 mm Element design for high performance engine - by Captain America - 04-09-2012, 03:29 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-09-2012, 03:36 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-11-2012, 01:00 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 04-11-2012, 03:25 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-17-2012, 12:12 AM

RE: 7,5 mm Element design for high performance engine - by Volker407 - 05-28-2012, 04:20 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-28-2012, 09:45 AM

RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 04-17-2012, 01:54 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 04-19-2012, 04:54 PM

RE: 7,5 mm Element design for high performance engine - by yatzee - 04-19-2012, 04:56 PM

RE: 7,5 mm Element design for high performance engine - by 300SD_KY - 04-20-2012, 08:16 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 04-27-2012, 05:56 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-27-2012, 06:29 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 04-27-2012, 06:35 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 04-27-2012, 05:38 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 05-01-2012, 09:51 AM

RE: 7,5 mm Element design for high performance engine - by swecias - 05-01-2012, 03:30 PM

RE: 7,5 mm Element design for high performance engine - by Diesel-Wiking - 05-01-2012, 04:08 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-02-2012, 02:21 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 05-04-2012, 08:05 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-04-2012, 10:19 AM

RE: 7,5 mm Element design for high performance engine - by George3soccer - 05-04-2012, 11:45 AM

RE: 7,5 mm Element design for high performance engine - by swecias - 05-04-2012, 12:59 PM

RE: 7,5 mm Element design for high performance engine - by bricktron - 05-06-2012, 01:39 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-11-2012, 11:11 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 05-13-2012, 09:49 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-22-2012, 04:41 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 05-22-2012, 06:32 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 05-22-2012, 02:36 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-23-2012, 01:23 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 05-30-2012, 10:41 AM

RE: 7,5 mm Element design for high performance engine - by W126Lover - 07-17-2012, 12:03 AM

RE: 7,5 mm Element design for high performance engine - by _siim_ - 07-17-2012, 08:35 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-17-2012, 01:03 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-19-2012, 06:05 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-19-2012, 12:12 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-19-2012, 03:02 PM

RE: 7,5 mm Element design for high performance engine - by Riverstick - 07-19-2012, 12:53 PM

RE: 7,5 mm Element design for high performance engine - by Spaceraver - 07-18-2012, 01:42 PM

RE: 7,5 mm Element design for high performance engine - by Greazzer - 07-19-2012, 07:34 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-20-2012, 12:27 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 07-20-2012, 09:38 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-20-2012, 01:44 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 07-20-2012, 02:53 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-21-2012, 12:01 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 07-21-2012, 03:53 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-22-2012, 02:20 AM

RE: 7,5 mm Element design for high performance engine - by frodes - 08-02-2012, 09:27 AM

RE: 7,5 mm Element design for high performance engine - by Greazzer - 07-20-2012, 10:36 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-06-2012, 01:04 PM

RE: 7,5 mm Element design for high performance engine - by Gearbound - 08-06-2012, 01:52 PM

RE: 7,5 mm Element design for high performance engine - by aaa - 08-06-2012, 11:38 PM

RE: 7,5 mm Element design for high performance engine - by frodes - 08-07-2012, 03:38 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-07-2012, 12:52 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 08-07-2012, 05:34 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-08-2012, 10:16 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 08-08-2012, 10:24 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-08-2012, 11:08 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 08-08-2012, 04:42 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-08-2012, 01:23 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 08-08-2012, 02:33 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-08-2012, 03:35 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-09-2012, 03:00 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 08-09-2012, 06:51 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-10-2012, 10:11 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 08-10-2012, 04:04 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 08-10-2012, 05:36 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-13-2012, 12:41 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 08-09-2012, 12:16 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-09-2012, 02:06 PM

RE: 7,5 mm Element design for high performance engine - by mercemann - 08-12-2012, 06:17 AM

RE: 7,5 mm Element design for high performance engine - by Mark_M - 08-12-2012, 08:36 AM

RE: 7,5 mm Element design for high performance engine - by mercemann - 08-12-2012, 10:47 AM

RE: 7,5 mm Element design for high performance engine - by Gearbound - 08-13-2012, 09:09 AM

RE: 7,5 mm Element design for high performance engine - by ronnie - 08-13-2012, 11:35 AM

RE: 7,5 mm Element design for high performance engine - by frodes - 08-13-2012, 02:03 PM

RE: 7,5 mm Element design for high performance engine - by mercemann - 08-13-2012, 03:57 PM

RE: 7,5 mm Element design for high performance engine - by frodes - 08-13-2012, 04:00 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 08-14-2012, 01:28 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 08-14-2012, 12:46 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-14-2012, 05:28 AM

RE: 7,5 mm Element design for high performance engine - by mercemann - 08-15-2012, 12:40 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-14-2012, 08:46 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-15-2012, 12:09 PM

RE: 7,5 mm Element design for high performance engine - by 300SD_KY - 08-17-2012, 09:18 AM

RE: 7,5 mm Element design for high performance engine - by RICHIS - 08-17-2012, 05:23 PM

RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 08-18-2012, 11:52 AM

RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 08-18-2012, 08:38 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 08-20-2012, 08:58 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 08-20-2012, 09:36 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 08-22-2012, 06:09 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-09-2012, 03:24 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 09-09-2012, 01:46 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-10-2012, 06:01 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 09-09-2012, 09:17 PM

RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 09-09-2012, 10:33 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 09-10-2012, 09:14 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 09-10-2012, 06:21 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 09-12-2012, 04:29 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 09-10-2012, 11:12 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-11-2012, 04:07 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 09-12-2012, 02:40 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-12-2012, 03:55 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 09-12-2012, 04:27 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 10-18-2012, 09:10 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 10-19-2012, 10:17 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 10-20-2012, 03:40 PM

RE: 7,5 mm Element design for high performance engine - by huseyin55amg - 10-25-2012, 03:22 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 10-27-2012, 04:09 AM

RE: 7,5 mm Element design for high performance engine - by huseyin55amg - 10-28-2012, 01:31 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 11:16 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 11-02-2012, 11:18 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 11:54 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 11-02-2012, 11:58 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 01:04 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-07-2012, 04:30 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-08-2012, 12:31 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 11-08-2012, 07:38 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-09-2012, 04:19 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-02-2012, 02:01 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 02:26 PM

RE: 7,5 mm Element design for high performance engine - by yankneck696 - 11-02-2012, 06:45 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 11-02-2012, 08:12 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 11-03-2012, 08:20 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-03-2012, 10:47 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-03-2012, 06:10 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 11-03-2012, 07:33 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 11-06-2012, 05:58 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-06-2012, 02:57 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-06-2012, 08:18 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-06-2012, 11:05 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 11-07-2012, 05:10 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-10-2012, 12:19 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-10-2012, 01:58 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-10-2012, 03:35 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 11-10-2012, 03:36 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-11-2012, 12:37 PM

RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-12-2012, 05:51 AM

RE: 7,5 mm Element design for high performance engine - by raidaru - 11-12-2012, 12:33 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-13-2012, 12:28 PM

RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-15-2012, 09:05 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 10:44 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 10:44 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 11:02 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 11:10 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 11:14 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 11:17 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 11:22 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:09 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 12:11 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 11-15-2012, 11:24 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:12 PM

RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-17-2012, 04:18 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 12:21 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-15-2012, 03:27 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:21 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 12:26 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:32 PM

RE: 7,5 mm Element design for high performance engine - by Savitas - 11-15-2012, 02:29 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 02:54 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 04:13 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 04:16 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-15-2012, 04:28 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 04:59 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-16-2012, 01:45 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-16-2012, 02:34 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-16-2012, 03:30 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-16-2012, 04:07 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 11-16-2012, 04:10 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 11-16-2012, 04:17 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-16-2012, 07:00 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-16-2012, 08:30 AM

RE: 7,5 mm Element design for high performance engine - by erling66 - 11-16-2012, 11:38 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-16-2012, 04:42 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 11-16-2012, 04:56 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-18-2012, 08:45 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-17-2012, 07:17 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-17-2012, 08:47 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-17-2012, 09:14 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-17-2012, 05:12 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-17-2012, 05:16 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 11-18-2012, 12:15 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-18-2012, 12:22 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 01:18 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-22-2012, 01:26 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 03:20 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 11-22-2012, 03:14 PM

RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-17-2012, 07:07 PM

RE: 7,5 mm Element design for high performance engine - by raysorenson - 11-17-2012, 08:50 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-22-2012, 03:36 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 07:10 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 11-24-2012, 01:24 PM

RE: 7,5 mm Element design for high performance engine - by Mark_M - 11-22-2012, 07:34 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 07:39 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-23-2012, 03:31 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-23-2012, 05:06 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-23-2012, 08:37 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-24-2012, 12:14 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-24-2012, 07:05 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-25-2012, 09:17 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-24-2012, 01:09 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-24-2012, 01:19 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-24-2012, 03:50 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-24-2012, 05:42 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-24-2012, 06:49 PM

RE: 7,5 mm Element design for high performance engine - by 300SD81 - 11-25-2012, 11:37 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-25-2012, 03:54 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-26-2012, 02:55 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-26-2012, 12:16 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-26-2012, 12:41 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-26-2012, 12:56 PM

RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-27-2012, 03:11 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-27-2012, 03:45 PM

RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-27-2012, 05:39 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-27-2012, 05:45 PM

RE: 7,5 mm Element design for high performance engine - by hooblah - 11-27-2012, 06:07 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 11:14 AM

RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-29-2012, 03:52 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 03:55 PM

RE: 7,5 mm Element design for high performance engine - by 300SD81 - 11-29-2012, 11:21 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 11:25 AM

RE: 7,5 mm Element design for high performance engine - by majesty78 - 11-29-2012, 01:27 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 01:42 PM

RE: 7,5 mm Element design for high performance engine - by hansebanger77 - 11-29-2012, 04:23 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 04:32 PM

RE: 7,5 mm Element design for high performance engine - by hansebanger77 - 12-01-2012, 03:00 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 12-02-2012, 09:05 AM

RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-30-2012, 03:00 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 12-01-2012, 09:58 AM

RE: 7,5 mm Element design for high performance engine - by maKe- - 12-02-2012, 07:21 PM

RE: 7,5 mm Element design for high performance engine - by majesty78 - 12-11-2012, 05:49 AM

RE: 7,5 mm Element design for high performance engine - by BigAssCFotPrint - 12-11-2012, 09:50 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 12-20-2012, 11:00 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 01-21-2013, 01:51 AM

RE: 7,5 mm Element design for high performance engine - by raysorenson - 01-21-2013, 06:34 PM

RE: 7,5 mm Element design for high performance engine - by swecias - 03-03-2013, 12:58 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-26-2013, 08:04 AM

RE: 7,5 mm Element design for high performance engine - by Duncansport - 04-26-2013, 08:11 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 04-26-2013, 08:18 AM

RE: 7,5 mm Element design for high performance engine - by Duncansport - 04-26-2013, 08:36 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 04-26-2013, 08:41 AM

RE: 7,5 mm Element design for high performance engine - by frodes - 04-26-2013, 04:57 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 04-27-2013, 02:43 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-27-2013, 05:25 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 04-26-2013, 04:55 PM

RE: 7,5 mm Element design for high performance engine - by Duncansport - 04-26-2013, 08:12 PM

RE: 7,5 mm Element design for high performance engine - by HaavardPYA - 04-27-2013, 06:37 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 04-27-2013, 05:09 PM

RE: 7,5 mm Element design for high performance engine - by Stamsaas - 04-29-2013, 10:33 AM

RE: 7,5 mm Element design for high performance engine - by lgreeley83 - 04-29-2013, 11:54 AM

RE: 7,5 mm Element design for high performance engine - by Stamsaas - 04-30-2013, 04:23 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-06-2013, 01:08 PM

RE: 7,5 mm Element design for high performance engine - by Stamsaas - 05-06-2013, 02:23 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 05-06-2013, 04:00 PM

RE: 7,5 mm Element design for high performance engine - by HaavardPYA - 05-06-2013, 04:04 PM

RE: 7,5 mm Element design for high performance engine - by Njdub - 05-06-2013, 08:53 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-12-2013, 01:46 PM

RE: 7,5 mm Element design for high performance engine - by hansebanger77 - 06-12-2013, 02:12 PM

RE: 7,5 mm Element design for high performance engine - by Duncansport - 06-12-2013, 03:15 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 06-12-2013, 04:45 PM

RE: 7,5 mm Element design for high performance engine - by MFSuper90 - 06-12-2013, 09:08 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 06-13-2013, 03:32 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-13-2013, 09:56 AM

RE: 7,5 mm Element design for high performance engine - by squirrelmaster - 06-13-2013, 03:21 PM

RE: 7,5 mm Element design for high performance engine - by Bangaway - 06-13-2013, 08:12 PM

RE: 7,5 mm Element design for high performance engine - by Alastair E - 06-14-2013, 10:09 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 06-14-2013, 12:03 PM

RE: 7,5 mm Element design for high performance engine - by maKe- - 06-17-2013, 07:35 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-17-2013, 09:58 AM

RE: 7,5 mm Element design for high performance engine - by maKe- - 06-17-2013, 11:56 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-19-2013, 10:14 AM

RE: 7,5 mm Element design for high performance engine - by Duncansport - 06-19-2013, 11:18 AM

RE: 7,5 mm Element design for high performance engine - by willbhere4u - 06-19-2013, 10:32 AM

RE: 7,5 mm Element design for high performance engine - by Alastair E - 06-19-2013, 11:28 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 06-19-2013, 05:35 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-19-2013, 11:39 PM

RE: 7,5 mm Element design for high performance engine - by majesty78 - 06-21-2013, 06:20 AM

RE: 7,5 mm Element design for high performance engine - by yankneck696 - 06-21-2013, 07:31 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-28-2013, 08:42 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 06-28-2013, 11:55 AM

RE: 7,5 mm Element design for high performance engine - by barrote - 07-01-2013, 11:58 AM

RE: 7,5 mm Element design for high performance engine - by sorin_cel - 07-07-2013, 02:51 PM

RE: 7,5 mm Element design for high performance engine - by ErikT - 07-10-2013, 03:39 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 07-10-2013, 09:47 PM

RE: 7,5 mm Element design for high performance engine - by Domino81 - 07-17-2013, 06:56 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-17-2013, 10:40 AM

RE: 7,5 mm Element design for high performance engine - by yankneck696 - 07-18-2013, 08:12 AM

RE: 7,5 mm Element design for high performance engine - by Domino81 - 07-18-2013, 01:59 PM

RE: 7,5 mm Element design for high performance engine - by maxypriest - 07-18-2013, 05:59 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 07-19-2013, 04:02 AM

RE: 7,5 mm Element design for high performance engine - by HaavardPYA - 07-19-2013, 10:13 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 07-19-2013, 01:48 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-21-2013, 09:09 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 07-22-2013, 02:58 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 07-27-2013, 03:23 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 07-28-2013, 08:20 AM

RE: 7,5 mm Element design for high performance engine - by maxypriest - 07-23-2013, 08:36 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 07-23-2013, 12:34 PM

RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 07-26-2013, 06:43 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-06-2013, 07:17 AM

RE: 7,5 mm Element design for high performance engine - by hooblah - 09-06-2013, 10:39 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 09-06-2013, 01:26 PM

RE: 7,5 mm Element design for high performance engine - by 300SD_KY - 01-21-2014, 05:41 PM

RE: 7,5 mm Element design for high performance engine - by F.R.A.S - 01-23-2014, 09:33 AM

RE: 7,5 mm Element design for high performance engine - by baldur - 02-03-2014, 09:19 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 02-03-2014, 12:43 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-28-2014, 11:10 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 04-28-2014, 02:48 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-03-2014, 06:49 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-26-2014, 02:56 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 06-26-2014, 04:39 PM

RE: 7,5 mm Element design for high performance engine - by MFSuper90 - 06-26-2014, 05:00 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-27-2014, 01:58 AM

RE: 7,5 mm Element design for high performance engine - by Gearbound - 06-26-2014, 05:08 PM

RE: 7,5 mm Element design for high performance engine - by DiseaselWeasel - 06-27-2014, 03:19 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-27-2014, 03:42 AM

RE: 7,5 mm Element design for high performance engine - by DiseaselWeasel - 06-27-2014, 04:37 AM

RE: 7,5 mm Element design for high performance engine - by Spoolin - 09-08-2016, 12:11 PM

Users browsing this thread:
11 Guest(s)

Users browsing this thread:
11 Guest(s)