7,5 mm Element design for high performance engine
7,5 mm Element design for high performance engine
03-23-2012, 05:57 PM
#79
(03-23-2012, 04:07 PM)dieselmekenhi,(03-23-2012, 02:17 PM)dieselmerc dieselmeken, what do you think aboat the different camshafts in pumps with rs under 173 and those with rs over 173? according to the finns you will get significant more power from the higher rs number due to "quicker" injection time, for exampel you get aboat 460hp (om606) with older camshaft and aboat 570hp with newer model camshaft according to the finns,(with 170cc)
I have hard to see that the camshaft duration only will give 110 hp extra, when putting on 170cc, you must have 20 mm of rack in a 7 mm mynä pump, that I have tested in my own bench, that gives a total injectiontime of around 35-40 degrees, that is far to long to give that power according to me.
to be fair, i have asked this question to Goran and other people before but have never had a proper answer.
DO MYNA MODIFY THE PUMP CAMSHAFT?????
I know about engines but not alot about pumps but surely modifing the cam can give more fuel and shorter duration which will decrease EGTs
Am i correct?????
??????
This post was last modified: 03-23-2012, 06:05 PM by mantahead.
(03-23-2012, 04:07 PM)dieselmekenhi,(03-23-2012, 02:17 PM)dieselmerc dieselmeken, what do you think aboat the different camshafts in pumps with rs under 173 and those with rs over 173? according to the finns you will get significant more power from the higher rs number due to "quicker" injection time, for exampel you get aboat 460hp (om606) with older camshaft and aboat 570hp with newer model camshaft according to the finns,(with 170cc)
I have hard to see that the camshaft duration only will give 110 hp extra, when putting on 170cc, you must have 20 mm of rack in a 7 mm mynä pump, that I have tested in my own bench, that gives a total injectiontime of around 35-40 degrees, that is far to long to give that power according to me.
to be fair, i have asked this question to Goran and other people before but have never had a proper answer.
DO MYNA MODIFY THE PUMP CAMSHAFT?????
I know about engines but not alot about pumps but surely modifing the cam can give more fuel and shorter duration which will decrease EGTs
Am i correct?????
??????
Messages In This Thread
7,5 mm Element design for high performance engine - by dieselmeken - 02-27-2012, 02:43 PM
RE: 7,5 mm Element design for high performance engine - by Palmer - 02-27-2012, 03:45 PM
RE: 7,5 mm Element design for high performance engine - by willbhere4u - 02-27-2012, 04:37 PM
RE: 7,5 mm Element design for high performance engine - by Booster - 02-27-2012, 06:04 PM
RE: 7,5 mm Element design for high performance engine - by w123love - 02-27-2012, 08:28 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 02-27-2012, 09:10 PM
RE: 7,5 mm Element design for high performance engine - by pp d - 02-28-2012, 01:39 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 02-28-2012, 02:13 AM
RE: 7,5 mm Element design for high performance engine - by barrote - 02-28-2012, 05:38 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 02-28-2012, 05:26 PM
RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 02-29-2012, 12:13 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 02-28-2012, 11:22 PM
RE: 7,5 mm Element design for high performance engine - by Simpler=Better - 02-28-2012, 10:31 AM
RE: 7,5 mm Element design for high performance engine - by w210tdt - 02-28-2012, 01:04 PM
RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 02-28-2012, 01:21 PM
RE: 7,5 mm Element design for high performance engine - by 2996 - 02-28-2012, 01:22 PM
RE: 7,5 mm Element design for high performance engine - by huseyin55amg - 02-28-2012, 01:58 PM
RE: 7,5 mm Element design for high performance engine - by Captain America - 02-29-2012, 01:25 AM
RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 02-29-2012, 12:31 PM
RE: 7,5 mm Element design for high performance engine - by aaa - 02-29-2012, 03:47 PM
RE: 7,5 mm Element design for high performance engine - by w123love - 02-29-2012, 09:42 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 03-01-2012, 12:58 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-01-2012, 01:41 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 03-01-2012, 07:29 PM
RE: 7,5 mm Element design for high performance engine - by aaa - 03-01-2012, 07:43 PM
RE: 7,5 mm Element design for high performance engine - by w123love - 03-01-2012, 09:33 PM
RE: 7,5 mm Element design for high performance engine - by SurfRodder - 03-02-2012, 10:18 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-04-2012, 08:34 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 03-05-2012, 05:20 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-05-2012, 07:51 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 03-06-2012, 09:43 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-07-2012, 02:22 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-04-2012, 01:59 PM
RE: 7,5 mm Element design for high performance engine - by squirrelmaster - 03-04-2012, 04:47 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-05-2012, 06:00 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 03-05-2012, 04:15 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-06-2012, 01:29 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 03-06-2012, 02:40 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-06-2012, 04:14 PM
RE: 7,5 mm Element design for high performance engine - by iheartboost - 03-07-2012, 09:37 AM
RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 03-07-2012, 10:44 PM
RE: 7,5 mm Element design for high performance engine - by jonbobshinigin - 03-07-2012, 11:09 PM
RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 03-08-2012, 02:44 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-08-2012, 05:05 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-08-2012, 07:40 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-08-2012, 08:19 AM
RE: 7,5 mm Element design for high performance engine - by Savitas - 03-09-2012, 04:01 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-11-2012, 11:51 AM
RE: 7,5 mm Element design for high performance engine - by winmutt - 03-15-2012, 06:33 PM
RE: 7,5 mm Element design for high performance engine - by iheartboost - 03-08-2012, 08:02 PM
RE: 7,5 mm Element design for high performance engine - by diesel2fast4u - 03-09-2012, 02:16 AM
RE: 7,5 mm Element design for high performance engine - by George3soccer - 03-09-2012, 08:54 AM
RE: 7,5 mm Element design for high performance engine - by Alastair E - 03-13-2012, 06:15 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-13-2012, 07:37 AM
RE: 7,5 mm Element design for high performance engine - by Twinturboguy - 03-14-2012, 12:16 PM
RE: 7,5 mm Element design for high performance engine - by W126Lover - 03-18-2012, 12:22 AM
RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 03-18-2012, 01:04 AM
RE: 7,5 mm Element design for high performance engine - by pp d - 03-18-2012, 10:29 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-21-2012, 04:09 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-21-2012, 04:54 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-21-2012, 05:40 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-21-2012, 05:48 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-21-2012, 07:55 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-21-2012, 08:45 AM
RE: 7,5 mm Element design for high performance engine - by winmutt - 03-21-2012, 09:14 PM
RE: 7,5 mm Element design for high performance engine - by Twinturboguy - 03-21-2012, 07:40 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-21-2012, 09:00 AM
RE: 7,5 mm Element design for high performance engine - by yankneck696 - 03-21-2012, 04:49 PM
RE: 7,5 mm Element design for high performance engine - by ErikT - 03-21-2012, 05:04 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 03-21-2012, 05:31 PM
RE: 7,5 mm Element design for high performance engine - by pp d - 03-22-2012, 01:02 AM
RE: 7,5 mm Element design for high performance engine - by winmutt - 03-24-2012, 08:45 AM
RE: 7,5 mm Element design for high performance engine - by Booster - 03-22-2012, 11:04 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-22-2012, 01:36 PM
RE: 7,5 mm Element design for high performance engine - by erling66 - 03-23-2012, 04:09 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-23-2012, 07:03 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 03-23-2012, 02:34 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-23-2012, 02:17 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-23-2012, 04:07 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 03-23-2012, 05:57 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 03-24-2012, 12:21 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-24-2012, 04:43 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 03-24-2012, 02:51 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 03-25-2012, 03:03 PM
RE: 7,5 mm Element design for high performance engine - by jeemu - 03-26-2012, 02:32 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 03-26-2012, 06:04 PM
RE: 7,5 mm Element design for high performance engine - by Savitas - 03-27-2012, 02:41 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 03-28-2012, 06:10 AM
RE: 7,5 mm Element design for high performance engine - by Savitas - 03-28-2012, 07:47 AM
RE: 7,5 mm Element design for high performance engine - by Alastair E - 03-28-2012, 11:16 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-28-2012, 12:29 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-28-2012, 02:19 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-29-2012, 10:02 AM
RE: 7,5 mm Element design for high performance engine - by JustPassinThru - 03-28-2012, 11:28 AM
RE: 7,5 mm Element design for high performance engine - by erling66 - 03-28-2012, 03:29 PM
RE: 7,5 mm Element design for high performance engine - by Simpler=Better - 03-28-2012, 03:32 PM
RE: 7,5 mm Element design for high performance engine - by Alastair E - 03-29-2012, 10:19 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-29-2012, 04:46 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 03-29-2012, 11:59 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-30-2012, 02:16 AM
RE: 7,5 mm Element design for high performance engine - by swecias - 04-01-2012, 03:30 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-30-2012, 04:57 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 03-30-2012, 05:15 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 03-31-2012, 01:21 AM
RE: 7,5 mm Element design for high performance engine - by erling66 - 03-31-2012, 02:40 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 03-31-2012, 02:11 PM
RE: 7,5 mm Element design for high performance engine - by erling66 - 04-01-2012, 03:07 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 04-01-2012, 09:23 AM
RE: 7,5 mm Element design for high performance engine - by erling66 - 04-01-2012, 01:43 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 04-02-2012, 08:50 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-02-2012, 10:56 AM
RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 04-02-2012, 09:33 PM
RE: 7,5 mm Element design for high performance engine - by yankneck696 - 04-02-2012, 05:47 PM
RE: 7,5 mm Element design for high performance engine - by 2996 - 04-03-2012, 12:13 PM
RE: 7,5 mm Element design for high performance engine - by lgreeley83 - 04-03-2012, 12:48 PM
RE: 7,5 mm Element design for high performance engine - by iheartboost - 04-03-2012, 09:13 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-05-2012, 01:55 PM
RE: 7,5 mm Element design for high performance engine - by iheartboost - 04-05-2012, 07:05 PM
RE: 7,5 mm Element design for high performance engine - by Captain America - 04-09-2012, 03:29 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-09-2012, 03:36 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-11-2012, 01:00 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 04-11-2012, 03:25 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-17-2012, 12:12 AM
RE: 7,5 mm Element design for high performance engine - by Volker407 - 05-28-2012, 04:20 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-28-2012, 09:45 AM
RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 04-17-2012, 01:54 AM
RE: 7,5 mm Element design for high performance engine - by winmutt - 04-19-2012, 04:54 PM
RE: 7,5 mm Element design for high performance engine - by yatzee - 04-19-2012, 04:56 PM
RE: 7,5 mm Element design for high performance engine - by 300SD_KY - 04-20-2012, 08:16 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 04-27-2012, 05:56 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-27-2012, 06:29 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 04-27-2012, 06:35 AM
RE: 7,5 mm Element design for high performance engine - by winmutt - 04-27-2012, 05:38 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 05-01-2012, 09:51 AM
RE: 7,5 mm Element design for high performance engine - by swecias - 05-01-2012, 03:30 PM
RE: 7,5 mm Element design for high performance engine - by Diesel-Wiking - 05-01-2012, 04:08 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-02-2012, 02:21 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 05-04-2012, 08:05 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-04-2012, 10:19 AM
RE: 7,5 mm Element design for high performance engine - by George3soccer - 05-04-2012, 11:45 AM
RE: 7,5 mm Element design for high performance engine - by swecias - 05-04-2012, 12:59 PM
RE: 7,5 mm Element design for high performance engine - by bricktron - 05-06-2012, 01:39 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-11-2012, 11:11 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 05-13-2012, 09:49 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-22-2012, 04:41 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 05-22-2012, 06:32 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 05-22-2012, 02:36 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-23-2012, 01:23 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 05-30-2012, 10:41 AM
RE: 7,5 mm Element design for high performance engine - by W126Lover - 07-17-2012, 12:03 AM
RE: 7,5 mm Element design for high performance engine - by _siim_ - 07-17-2012, 08:35 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-17-2012, 01:03 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 07-19-2012, 06:05 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-19-2012, 12:12 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 07-19-2012, 03:02 PM
RE: 7,5 mm Element design for high performance engine - by Riverstick - 07-19-2012, 12:53 PM
RE: 7,5 mm Element design for high performance engine - by Spaceraver - 07-18-2012, 01:42 PM
RE: 7,5 mm Element design for high performance engine - by Greazzer - 07-19-2012, 07:34 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 07-20-2012, 12:27 AM
RE: 7,5 mm Element design for high performance engine - by Turbo - 07-20-2012, 09:38 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 07-20-2012, 01:44 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 07-20-2012, 02:53 PM
RE: 7,5 mm Element design for high performance engine - by tomnik - 07-21-2012, 12:01 AM
RE: 7,5 mm Element design for high performance engine - by Turbo - 07-21-2012, 03:53 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 07-22-2012, 02:20 AM
RE: 7,5 mm Element design for high performance engine - by frodes - 08-02-2012, 09:27 AM
RE: 7,5 mm Element design for high performance engine - by Greazzer - 07-20-2012, 10:36 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-06-2012, 01:04 PM
RE: 7,5 mm Element design for high performance engine - by Gearbound - 08-06-2012, 01:52 PM
RE: 7,5 mm Element design for high performance engine - by aaa - 08-06-2012, 11:38 PM
RE: 7,5 mm Element design for high performance engine - by frodes - 08-07-2012, 03:38 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-07-2012, 12:52 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 08-07-2012, 05:34 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-08-2012, 10:16 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 08-08-2012, 10:24 AM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-08-2012, 11:08 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 08-08-2012, 04:42 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-08-2012, 01:23 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 08-08-2012, 02:33 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-08-2012, 03:35 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-09-2012, 03:00 AM
RE: 7,5 mm Element design for high performance engine - by Turbo - 08-09-2012, 06:51 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-10-2012, 10:11 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 08-10-2012, 04:04 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 08-10-2012, 05:36 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-13-2012, 12:41 PM
RE: 7,5 mm Element design for high performance engine - by jeemu - 08-09-2012, 12:16 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-09-2012, 02:06 PM
RE: 7,5 mm Element design for high performance engine - by mercemann - 08-12-2012, 06:17 AM
RE: 7,5 mm Element design for high performance engine - by Mark_M - 08-12-2012, 08:36 AM
RE: 7,5 mm Element design for high performance engine - by mercemann - 08-12-2012, 10:47 AM
RE: 7,5 mm Element design for high performance engine - by Gearbound - 08-13-2012, 09:09 AM
RE: 7,5 mm Element design for high performance engine - by ronnie - 08-13-2012, 11:35 AM
RE: 7,5 mm Element design for high performance engine - by frodes - 08-13-2012, 02:03 PM
RE: 7,5 mm Element design for high performance engine - by mercemann - 08-13-2012, 03:57 PM
RE: 7,5 mm Element design for high performance engine - by frodes - 08-13-2012, 04:00 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 08-14-2012, 01:28 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 08-14-2012, 12:46 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-14-2012, 05:28 AM
RE: 7,5 mm Element design for high performance engine - by mercemann - 08-15-2012, 12:40 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-14-2012, 08:46 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-15-2012, 12:09 PM
RE: 7,5 mm Element design for high performance engine - by 300SD_KY - 08-17-2012, 09:18 AM
RE: 7,5 mm Element design for high performance engine - by RICHIS - 08-17-2012, 05:23 PM
RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 08-18-2012, 11:52 AM
RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 08-18-2012, 08:38 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 08-20-2012, 08:58 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 08-20-2012, 09:36 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 08-22-2012, 06:09 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-09-2012, 03:24 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 09-09-2012, 01:46 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-10-2012, 06:01 AM
RE: 7,5 mm Element design for high performance engine - by winmutt - 09-09-2012, 09:17 PM
RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 09-09-2012, 10:33 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 09-10-2012, 09:14 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 09-10-2012, 06:21 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 09-12-2012, 04:29 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 09-10-2012, 11:12 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-11-2012, 04:07 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 09-12-2012, 02:40 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-12-2012, 03:55 AM
RE: 7,5 mm Element design for high performance engine - by tomnik - 09-12-2012, 04:27 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 10-18-2012, 09:10 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 10-19-2012, 10:17 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 10-20-2012, 03:40 PM
RE: 7,5 mm Element design for high performance engine - by huseyin55amg - 10-25-2012, 03:22 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 10-27-2012, 04:09 AM
RE: 7,5 mm Element design for high performance engine - by huseyin55amg - 10-28-2012, 01:31 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 11:16 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 11-02-2012, 11:18 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 11:54 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 11-02-2012, 11:58 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 01:04 PM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-07-2012, 04:30 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-08-2012, 12:31 AM
RE: 7,5 mm Element design for high performance engine - by Turbo - 11-08-2012, 07:38 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-09-2012, 04:19 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 11-02-2012, 02:01 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 02:26 PM
RE: 7,5 mm Element design for high performance engine - by yankneck696 - 11-02-2012, 06:45 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 11-02-2012, 08:12 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 11-03-2012, 08:20 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-03-2012, 10:47 AM
RE: 7,5 mm Element design for high performance engine - by winmutt - 11-03-2012, 06:10 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 11-03-2012, 07:33 PM
RE: 7,5 mm Element design for high performance engine - by dieselmerc - 11-06-2012, 05:58 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-06-2012, 02:57 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 11-06-2012, 08:18 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 11-06-2012, 11:05 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 11-07-2012, 05:10 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-10-2012, 12:19 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 11-10-2012, 01:58 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-10-2012, 03:35 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 11-10-2012, 03:36 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-11-2012, 12:37 PM
RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-12-2012, 05:51 AM
RE: 7,5 mm Element design for high performance engine - by raidaru - 11-12-2012, 12:33 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-13-2012, 12:28 PM
RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-15-2012, 09:05 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 10:44 AM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 10:44 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 11:02 AM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 11:10 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 11:14 AM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 11:17 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 11:22 AM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:09 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 12:11 PM
RE: 7,5 mm Element design for high performance engine - by erling66 - 11-15-2012, 11:24 AM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:12 PM
RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-17-2012, 04:18 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 12:21 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-15-2012, 03:27 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:21 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 12:26 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:32 PM
RE: 7,5 mm Element design for high performance engine - by Savitas - 11-15-2012, 02:29 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 02:54 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 04:13 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 04:16 PM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-15-2012, 04:28 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 04:59 PM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-16-2012, 01:45 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-16-2012, 02:34 PM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-16-2012, 03:30 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-16-2012, 04:07 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 11-16-2012, 04:10 PM
RE: 7,5 mm Element design for high performance engine - by erling66 - 11-16-2012, 04:17 AM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-16-2012, 07:00 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-16-2012, 08:30 AM
RE: 7,5 mm Element design for high performance engine - by erling66 - 11-16-2012, 11:38 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-16-2012, 04:42 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 11-16-2012, 04:56 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-18-2012, 08:45 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-17-2012, 07:17 AM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-17-2012, 08:47 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-17-2012, 09:14 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-17-2012, 05:12 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-17-2012, 05:16 PM
RE: 7,5 mm Element design for high performance engine - by erling66 - 11-18-2012, 12:15 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-18-2012, 12:22 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 01:18 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-22-2012, 01:26 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 03:20 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 11-22-2012, 03:14 PM
RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-17-2012, 07:07 PM
RE: 7,5 mm Element design for high performance engine - by raysorenson - 11-17-2012, 08:50 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-22-2012, 03:36 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 07:10 PM
RE: 7,5 mm Element design for high performance engine - by erling66 - 11-24-2012, 01:24 PM
RE: 7,5 mm Element design for high performance engine - by Mark_M - 11-22-2012, 07:34 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 07:39 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-23-2012, 03:31 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-23-2012, 05:06 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 11-23-2012, 08:37 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-24-2012, 12:14 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-24-2012, 07:05 AM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-25-2012, 09:17 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-24-2012, 01:09 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-24-2012, 01:19 PM
RE: 7,5 mm Element design for high performance engine - by jeemu - 11-24-2012, 03:50 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-24-2012, 05:42 PM
RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-24-2012, 06:49 PM
RE: 7,5 mm Element design for high performance engine - by 300SD81 - 11-25-2012, 11:37 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-25-2012, 03:54 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-26-2012, 02:55 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-26-2012, 12:16 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-26-2012, 12:41 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-26-2012, 12:56 PM
RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-27-2012, 03:11 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-27-2012, 03:45 PM
RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-27-2012, 05:39 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-27-2012, 05:45 PM
RE: 7,5 mm Element design for high performance engine - by hooblah - 11-27-2012, 06:07 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 11:14 AM
RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-29-2012, 03:52 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 03:55 PM
RE: 7,5 mm Element design for high performance engine - by 300SD81 - 11-29-2012, 11:21 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 11:25 AM
RE: 7,5 mm Element design for high performance engine - by majesty78 - 11-29-2012, 01:27 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 01:42 PM
RE: 7,5 mm Element design for high performance engine - by hansebanger77 - 11-29-2012, 04:23 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 04:32 PM
RE: 7,5 mm Element design for high performance engine - by hansebanger77 - 12-01-2012, 03:00 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 12-02-2012, 09:05 AM
RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-30-2012, 03:00 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 12-01-2012, 09:58 AM
RE: 7,5 mm Element design for high performance engine - by maKe- - 12-02-2012, 07:21 PM
RE: 7,5 mm Element design for high performance engine - by majesty78 - 12-11-2012, 05:49 AM
RE: 7,5 mm Element design for high performance engine - by BigAssCFotPrint - 12-11-2012, 09:50 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 12-20-2012, 11:00 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 01-21-2013, 01:51 AM
RE: 7,5 mm Element design for high performance engine - by raysorenson - 01-21-2013, 06:34 PM
RE: 7,5 mm Element design for high performance engine - by swecias - 03-03-2013, 12:58 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-26-2013, 08:04 AM
RE: 7,5 mm Element design for high performance engine - by Duncansport - 04-26-2013, 08:11 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 04-26-2013, 08:18 AM
RE: 7,5 mm Element design for high performance engine - by Duncansport - 04-26-2013, 08:36 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 04-26-2013, 08:41 AM
RE: 7,5 mm Element design for high performance engine - by frodes - 04-26-2013, 04:57 PM
RE: 7,5 mm Element design for high performance engine - by erling66 - 04-27-2013, 02:43 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-27-2013, 05:25 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 04-26-2013, 04:55 PM
RE: 7,5 mm Element design for high performance engine - by Duncansport - 04-26-2013, 08:12 PM
RE: 7,5 mm Element design for high performance engine - by HaavardPYA - 04-27-2013, 06:37 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 04-27-2013, 05:09 PM
RE: 7,5 mm Element design for high performance engine - by Stamsaas - 04-29-2013, 10:33 AM
RE: 7,5 mm Element design for high performance engine - by lgreeley83 - 04-29-2013, 11:54 AM
RE: 7,5 mm Element design for high performance engine - by Stamsaas - 04-30-2013, 04:23 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-06-2013, 01:08 PM
RE: 7,5 mm Element design for high performance engine - by Stamsaas - 05-06-2013, 02:23 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 05-06-2013, 04:00 PM
RE: 7,5 mm Element design for high performance engine - by HaavardPYA - 05-06-2013, 04:04 PM
RE: 7,5 mm Element design for high performance engine - by Njdub - 05-06-2013, 08:53 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-12-2013, 01:46 PM
RE: 7,5 mm Element design for high performance engine - by hansebanger77 - 06-12-2013, 02:12 PM
RE: 7,5 mm Element design for high performance engine - by Duncansport - 06-12-2013, 03:15 PM
RE: 7,5 mm Element design for high performance engine - by mantahead - 06-12-2013, 04:45 PM
RE: 7,5 mm Element design for high performance engine - by MFSuper90 - 06-12-2013, 09:08 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 06-13-2013, 03:32 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-13-2013, 09:56 AM
RE: 7,5 mm Element design for high performance engine - by squirrelmaster - 06-13-2013, 03:21 PM
RE: 7,5 mm Element design for high performance engine - by Bangaway - 06-13-2013, 08:12 PM
RE: 7,5 mm Element design for high performance engine - by Alastair E - 06-14-2013, 10:09 AM
RE: 7,5 mm Element design for high performance engine - by winmutt - 06-14-2013, 12:03 PM
RE: 7,5 mm Element design for high performance engine - by maKe- - 06-17-2013, 07:35 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-17-2013, 09:58 AM
RE: 7,5 mm Element design for high performance engine - by maKe- - 06-17-2013, 11:56 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-19-2013, 10:14 AM
RE: 7,5 mm Element design for high performance engine - by Duncansport - 06-19-2013, 11:18 AM
RE: 7,5 mm Element design for high performance engine - by willbhere4u - 06-19-2013, 10:32 AM
RE: 7,5 mm Element design for high performance engine - by Alastair E - 06-19-2013, 11:28 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 06-19-2013, 05:35 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-19-2013, 11:39 PM
RE: 7,5 mm Element design for high performance engine - by majesty78 - 06-21-2013, 06:20 AM
RE: 7,5 mm Element design for high performance engine - by yankneck696 - 06-21-2013, 07:31 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-28-2013, 08:42 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 06-28-2013, 11:55 AM
RE: 7,5 mm Element design for high performance engine - by barrote - 07-01-2013, 11:58 AM
RE: 7,5 mm Element design for high performance engine - by sorin_cel - 07-07-2013, 02:51 PM
RE: 7,5 mm Element design for high performance engine - by ErikT - 07-10-2013, 03:39 PM
RE: 7,5 mm Element design for high performance engine - by winmutt - 07-10-2013, 09:47 PM
RE: 7,5 mm Element design for high performance engine - by Domino81 - 07-17-2013, 06:56 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-17-2013, 10:40 AM
RE: 7,5 mm Element design for high performance engine - by yankneck696 - 07-18-2013, 08:12 AM
RE: 7,5 mm Element design for high performance engine - by Domino81 - 07-18-2013, 01:59 PM
RE: 7,5 mm Element design for high performance engine - by maxypriest - 07-18-2013, 05:59 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 07-19-2013, 04:02 AM
RE: 7,5 mm Element design for high performance engine - by HaavardPYA - 07-19-2013, 10:13 AM
RE: 7,5 mm Element design for high performance engine - by Turbo - 07-19-2013, 01:48 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-21-2013, 09:09 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 07-22-2013, 02:58 AM
RE: 7,5 mm Element design for high performance engine - by jeemu - 07-27-2013, 03:23 PM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 07-28-2013, 08:20 AM
RE: 7,5 mm Element design for high performance engine - by maxypriest - 07-23-2013, 08:36 AM
RE: 7,5 mm Element design for high performance engine - by mantahead - 07-23-2013, 12:34 PM
RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 07-26-2013, 06:43 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-06-2013, 07:17 AM
RE: 7,5 mm Element design for high performance engine - by hooblah - 09-06-2013, 10:39 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 09-06-2013, 01:26 PM
RE: 7,5 mm Element design for high performance engine - by 300SD_KY - 01-21-2014, 05:41 PM
RE: 7,5 mm Element design for high performance engine - by F.R.A.S - 01-23-2014, 09:33 AM
RE: 7,5 mm Element design for high performance engine - by baldur - 02-03-2014, 09:19 AM
RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 02-03-2014, 12:43 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-28-2014, 11:10 AM
RE: 7,5 mm Element design for high performance engine - by Turbo - 04-28-2014, 02:48 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-03-2014, 06:49 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-26-2014, 02:56 PM
RE: 7,5 mm Element design for high performance engine - by Turbo - 06-26-2014, 04:39 PM
RE: 7,5 mm Element design for high performance engine - by MFSuper90 - 06-26-2014, 05:00 PM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-27-2014, 01:58 AM
RE: 7,5 mm Element design for high performance engine - by Gearbound - 06-26-2014, 05:08 PM
RE: 7,5 mm Element design for high performance engine - by DiseaselWeasel - 06-27-2014, 03:19 AM
RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-27-2014, 03:42 AM
RE: 7,5 mm Element design for high performance engine - by DiseaselWeasel - 06-27-2014, 04:37 AM
RE: 7,5 mm Element design for high performance engine - by Spoolin - 09-08-2016, 12:11 PM
Users browsing this thread:
9 Guest(s)
9 Guest(s)
Users browsing this thread:
9 Guest(s)
9 Guest(s)