STD Other Open Another car, chicago, uhhh 300d turbo w/4 speed manual

Another car, chicago, uhhh 300d turbo w/4 speed manual

Another car, chicago, uhhh 300d turbo w/4 speed manual

 
  • 0 Vote(s) - 0 Average
 
Pages (4): Previous 1 2 3 4
sassparilla_kid
diesel > all other fuels

1,618
09-28-2013, 02:11 PM #151
I thought it was like 40psi or something crazy

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
09-28-2013, 02:11 PM #151

I thought it was like 40psi or something crazy


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

JB3
Superturbo

1,795
09-29-2013, 09:12 AM #152
I enjoyed that video quite a bit. Big Grin

1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

JB3
09-29-2013, 09:12 AM #152

I enjoyed that video quite a bit. Big Grin


1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

Simpler=Better
PORTED HEAD

2,127
09-29-2013, 08:28 PM #153
Rumor is 2bar to bend 617 rods

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
09-29-2013, 08:28 PM #153

Rumor is 2bar to bend 617 rods


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

lgreeley83
Mr. Rumbles

775
09-29-2013, 08:47 PM #154
(09-29-2013, 08:28 PM)Simpler=Better Rumor is 2bar to bend 617 rods

Hmmm... i think i remember you sayin that. Now i need 1.9999 bar

" straighten up that star on the grill, assholes."

lgreeley83
09-29-2013, 08:47 PM #154

(09-29-2013, 08:28 PM)Simpler=Better Rumor is 2bar to bend 617 rods

Hmmm... i think i remember you sayin that. Now i need 1.9999 bar


" straighten up that star on the grill, assholes."

Simpler=Better
PORTED HEAD

2,127
09-29-2013, 10:17 PM #155
(09-29-2013, 08:47 PM)lgreeley83
(09-29-2013, 08:28 PM)Simpler=Better Rumor is 2bar to bend 617 rods

Hmmm... i think i remember you sayin that. Now i need 1.9999 bar

I've never tested it, didn't have enough fuel to need to go over 18psi though. That's why it's just a rumor.

You should document the bending process though, or prove us all wrong Big Grin

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
09-29-2013, 10:17 PM #155

(09-29-2013, 08:47 PM)lgreeley83
(09-29-2013, 08:28 PM)Simpler=Better Rumor is 2bar to bend 617 rods

Hmmm... i think i remember you sayin that. Now i need 1.9999 bar

I've never tested it, didn't have enough fuel to need to go over 18psi though. That's why it's just a rumor.

You should document the bending process though, or prove us all wrong Big Grin


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

lgreeley83
Mr. Rumbles

775
09-29-2013, 11:13 PM #156
(09-29-2013, 10:17 PM)Simpler=Better
(09-29-2013, 08:47 PM)lgreeley83
(09-29-2013, 08:28 PM)Simpler=Better Rumor is 2bar to bend 617 rods

Hmmm... i think i remember you sayin that. Now i need 1.9999 bar

I've never tested it, didn't have enough fuel to need to go over 18psi though. That's why it's just a rumor.

You should document the bending process though, or prove us all wrong Big Grin

Lol my wife does not approve of this process.

damn just studying my video my clutch was sucking soooo bad. That was a bad run. Don't let this be the image of my car. I was revving like crazy.
This post was last modified: 09-29-2013, 11:19 PM by lgreeley83.

" straighten up that star on the grill, assholes."

lgreeley83
09-29-2013, 11:13 PM #156

(09-29-2013, 10:17 PM)Simpler=Better
(09-29-2013, 08:47 PM)lgreeley83
(09-29-2013, 08:28 PM)Simpler=Better Rumor is 2bar to bend 617 rods

Hmmm... i think i remember you sayin that. Now i need 1.9999 bar

I've never tested it, didn't have enough fuel to need to go over 18psi though. That's why it's just a rumor.

You should document the bending process though, or prove us all wrong Big Grin

Lol my wife does not approve of this process.

damn just studying my video my clutch was sucking soooo bad. That was a bad run. Don't let this be the image of my car. I was revving like crazy.


" straighten up that star on the grill, assholes."

Simpler=Better
PORTED HEAD

2,127
09-30-2013, 08:28 AM #157
(09-29-2013, 11:13 PM)lgreeley83
(09-29-2013, 10:17 PM)Simpler=Better
(09-29-2013, 08:47 PM)lgreeley83 Hmmm... i think i remember you sayin that. Now i need 1.9999 bar

I've never tested it, didn't have enough fuel to need to go over 18psi though. That's why it's just a rumor.

You should document the bending process though, or prove us all wrong Big Grin

Lol my wife does not approve of this process.

damn just studying my video my clutch was sucking soooo bad. That was a bad run. Don't let this be the image of my car. I was revving like crazy.
You were still MUCH faster than my auto 300d with a VNT, no alda, and methanol sprayers.

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
09-30-2013, 08:28 AM #157

(09-29-2013, 11:13 PM)lgreeley83
(09-29-2013, 10:17 PM)Simpler=Better
(09-29-2013, 08:47 PM)lgreeley83 Hmmm... i think i remember you sayin that. Now i need 1.9999 bar

I've never tested it, didn't have enough fuel to need to go over 18psi though. That's why it's just a rumor.

You should document the bending process though, or prove us all wrong Big Grin

Lol my wife does not approve of this process.

damn just studying my video my clutch was sucking soooo bad. That was a bad run. Don't let this be the image of my car. I was revving like crazy.
You were still MUCH faster than my auto 300d with a VNT, no alda, and methanol sprayers.


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

lgreeley83
Mr. Rumbles

775
01-22-2014, 06:41 PM #158
OK thinking intercoolers... A/A. Never gone done this road before. Any jargon I should know? I really don't know much about what makes a good intercooler. I know the desired outcome.

Any tips so I don't make obvious newbie mistakes in selection?

And for now I will likely go electric fan to allow for pipe routing. Go under the number and up a little. I'd go behind the grill but don't want to swap radiators just yet.

*Under the bumper*
This post was last modified: 01-22-2014, 06:44 PM by lgreeley83.

" straighten up that star on the grill, assholes."

lgreeley83
01-22-2014, 06:41 PM #158

OK thinking intercoolers... A/A. Never gone done this road before. Any jargon I should know? I really don't know much about what makes a good intercooler. I know the desired outcome.

Any tips so I don't make obvious newbie mistakes in selection?


And for now I will likely go electric fan to allow for pipe routing. Go under the number and up a little. I'd go behind the grill but don't want to swap radiators just yet.

*Under the bumper*


" straighten up that star on the grill, assholes."

Austincarnut
Holset

298
01-22-2014, 08:44 PM #159
http://www.enginebasics.com/Advanced%20E...ayers.html

(01-22-2014, 06:41 PM)lgreeley83 OK thinking intercoolers... A/A. Never gone done this road before. Any jargon I should know? I really don't know much about what makes a good intercooler. I know the desired outcome.

Any tips so I don't make obvious newbie mistakes in selection?

And for now I will likely go electric fan to allow for pipe routing. Go under the number and up a little. I'd go behind the grill but don't want to swap radiators just yet.

*Under the bumper*
Austincarnut
01-22-2014, 08:44 PM #159

http://www.enginebasics.com/Advanced%20E...ayers.html

(01-22-2014, 06:41 PM)lgreeley83 OK thinking intercoolers... A/A. Never gone done this road before. Any jargon I should know? I really don't know much about what makes a good intercooler. I know the desired outcome.

Any tips so I don't make obvious newbie mistakes in selection?

And for now I will likely go electric fan to allow for pipe routing. Go under the number and up a little. I'd go behind the grill but don't want to swap radiators just yet.

*Under the bumper*

lgreeley83
Mr. Rumbles

775
01-22-2014, 08:52 PM #160
I liked that idea about the wiper fluid. Sprayers would be too easy. I wonder why not everybody does it?

Yeah sprayer are in the plans for the setup ;-)

That guy is missing something though isn't he? He mentiones size but there is a specific internal design that is desirable isn't there? I read once about a style to avoid. Forget where I was looking though.
This post was last modified: 01-22-2014, 08:58 PM by lgreeley83.

" straighten up that star on the grill, assholes."

lgreeley83
01-22-2014, 08:52 PM #160

I liked that idea about the wiper fluid. Sprayers would be too easy. I wonder why not everybody does it?

Yeah sprayer are in the plans for the setup ;-)


That guy is missing something though isn't he? He mentiones size but there is a specific internal design that is desirable isn't there? I read once about a style to avoid. Forget where I was looking though.


" straighten up that star on the grill, assholes."

MFSuper90
Budget Builder

1,533
01-26-2014, 11:21 PM #161
Your clutch was hating its life in that video lol.
I had my old Garrett charger at 30psi and I have no bent rods...

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
01-26-2014, 11:21 PM #161

Your clutch was hating its life in that video lol.
I had my old Garrett charger at 30psi and I have no bent rods...


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

lgreeley83
Mr. Rumbles

775
01-26-2014, 11:45 PM #162
Lol my 2nd gear pull was soooo weak. Couldn't get that clutch to grip worth anything. I've got to do something there.

I did reading on intercoolers. Bar plate? Sounds easy enough . I'm thinking fit it at the bottom of my bull bar. Gives me about 20" x 9" x 3"

" straighten up that star on the grill, assholes."

lgreeley83
01-26-2014, 11:45 PM #162

Lol my 2nd gear pull was soooo weak. Couldn't get that clutch to grip worth anything. I've got to do something there.

I did reading on intercoolers. Bar plate? Sounds easy enough . I'm thinking fit it at the bottom of my bull bar. Gives me about 20" x 9" x 3"


" straighten up that star on the grill, assholes."

lgreeley83
Mr. Rumbles

775
01-30-2014, 05:16 PM #163
Well I'm just sucking today.
Guess I need a master cylinder for this. Pedal to the floor fluid full.

I've never done a master cylinder. Should it have died like that? One day fine next day no brakes at all?
This post was last modified: 01-30-2014, 06:14 PM by lgreeley83.

" straighten up that star on the grill, assholes."

lgreeley83
01-30-2014, 05:16 PM #163

Well I'm just sucking today.
Guess I need a master cylinder for this. Pedal to the floor fluid full.


I've never done a master cylinder. Should it have died like that? One day fine next day no brakes at all?


" straighten up that star on the grill, assholes."

lgreeley83
Mr. Rumbles

775
01-30-2014, 06:29 PM #164
Oops never mind I'm a douche. I opened and looked in back reservoir is empty. That thing is deceivingly.

" straighten up that star on the grill, assholes."

lgreeley83
01-30-2014, 06:29 PM #164

Oops never mind I'm a douche. I opened and looked in back reservoir is empty. That thing is deceivingly.


" straighten up that star on the grill, assholes."

MFSuper90
Budget Builder

1,533
01-31-2014, 01:39 AM #165
The brake reservoirs are very decieving actually. Happens to me everyone in awhile

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
01-31-2014, 01:39 AM #165

The brake reservoirs are very decieving actually. Happens to me everyone in awhile


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

Simpler=Better
PORTED HEAD

2,127
01-31-2014, 10:18 AM #166
(01-30-2014, 06:29 PM)lgreeley83 Oops never mind I'm a douche. I opened and looked in back reservoir is empty. That thing is deceivingly.

That still means there is a leak though!

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
01-31-2014, 10:18 AM #166

(01-30-2014, 06:29 PM)lgreeley83 Oops never mind I'm a douche. I opened and looked in back reservoir is empty. That thing is deceivingly.

That still means there is a leak though!


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

lgreeley83
Mr. Rumbles

775
01-31-2014, 10:33 AM #167
Yeah. And maybe my piston siezed. I dunno. I would have thought the pedal would have firmed up but no. I didn't bleed it at all though, too dark.

When I filled it and pumped level didn't change.

" straighten up that star on the grill, assholes."

lgreeley83
01-31-2014, 10:33 AM #167

Yeah. And maybe my piston siezed. I dunno. I would have thought the pedal would have firmed up but no. I didn't bleed it at all though, too dark.

When I filled it and pumped level didn't change.


" straighten up that star on the grill, assholes."

lgreeley83
Mr. Rumbles

775
02-08-2014, 10:18 PM #168
OK I can't win. 3 cars and they are all not worthy of putting my kids in. .... I will rant first than actual questions near the end....its about my blower circuit.

So this here car. Got all the glow plugs glowing. It starts in the cold, win. I took it to a shop to get the support bearing for drive shaft fixed, long over due. They fix it great but now that I actually have a bearing I can tell that the guy who did the 4,speed swap prior to me did not balance the shaft. Either that or the shop didn't put it back together right. I like the manager and we talked about lining shit up. I believe he knew what he was doing. But I get some vibration at 40+ haven't taken on the highway so can't fully describe yet. Probably need to take that out and get it balanced, maybe custom shaft?



Any who all that.

My heat blower motor has no power to it. The fuse is good. #8 when I play with the fuse I can hear clicking like a relay might be attempting stuff. I put power to fan and it goes. Also blows heat. Is that clicking the monovalve?

Is there a relay aside from the resistor thing u dear hood on the fender?

By the way. I'm am tired of winter. None of.my cars were breaking when it was warm.

And ya know, now that I've been here a while I feel sorta bad about asking questions about general maintenance so I will say sorry for that. But its cold and all my cars are giving me headaches. I've googled this shit and everyone talks about fuse 8 or motor brushes. Both are good. Wtf.

Oh and dammit I'm on my.second climate control unit could it be that again?! I need a simple fix fuuuuuuu
This post was last modified: 02-08-2014, 11:06 PM by lgreeley83.

" straighten up that star on the grill, assholes."

lgreeley83
02-08-2014, 10:18 PM #168

OK I can't win. 3 cars and they are all not worthy of putting my kids in. .... I will rant first than actual questions near the end....its about my blower circuit.

So this here car. Got all the glow plugs glowing. It starts in the cold, win. I took it to a shop to get the support bearing for drive shaft fixed, long over due. They fix it great but now that I actually have a bearing I can tell that the guy who did the 4,speed swap prior to me did not balance the shaft. Either that or the shop didn't put it back together right. I like the manager and we talked about lining shit up. I believe he knew what he was doing. But I get some vibration at 40+ haven't taken on the highway so can't fully describe yet. Probably need to take that out and get it balanced, maybe custom shaft?



Any who all that.

My heat blower motor has no power to it. The fuse is good. #8 when I play with the fuse I can hear clicking like a relay might be attempting stuff. I put power to fan and it goes. Also blows heat. Is that clicking the monovalve?

Is there a relay aside from the resistor thing u dear hood on the fender?


By the way. I'm am tired of winter. None of.my cars were breaking when it was warm.

And ya know, now that I've been here a while I feel sorta bad about asking questions about general maintenance so I will say sorry for that. But its cold and all my cars are giving me headaches. I've googled this shit and everyone talks about fuse 8 or motor brushes. Both are good. Wtf.

Oh and dammit I'm on my.second climate control unit could it be that again?! I need a simple fix fuuuuuuu


" straighten up that star on the grill, assholes."

DeliveryValve
Superturbo

1,338
02-09-2014, 01:09 AM #169
Simple stuff?... Check the cold engine blower motor lock temperature sensor located on the thermostat housing. If it is unplugged, your blower motor will not work. If plugged, then unplug it and ground the wiring to the block. Hopefully your blower will run.

If that is not the case, than look into a faulty resistor pack or another dead CCU.


.

Gota love Mercedes Diesels!



.
DeliveryValve
02-09-2014, 01:09 AM #169

Simple stuff?... Check the cold engine blower motor lock temperature sensor located on the thermostat housing. If it is unplugged, your blower motor will not work. If plugged, then unplug it and ground the wiring to the block. Hopefully your blower will run.

If that is not the case, than look into a faulty resistor pack or another dead CCU.


.


Gota love Mercedes Diesels!



.

JB3
Superturbo

1,795
02-11-2014, 10:26 AM #170
start looking for a 240D with manual climate control in the yards. I hate that box of bullshit (CCU) on the wifes car as well. Every other week its got some annoying problem.

latest is no heat above 60mph.

1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

JB3
02-11-2014, 10:26 AM #170

start looking for a 240D with manual climate control in the yards. I hate that box of bullshit (CCU) on the wifes car as well. Every other week its got some annoying problem.

latest is no heat above 60mph.


1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

lgreeley83
Mr. Rumbles

775
02-11-2014, 10:31 AM #171
I was playing with that thing on the thermostat housing and I heard a clicking, for now I just have power straight to the fan.

I will likely get rid of the ccu like simple did or something similar. Maybe a switch for the monovalve and a switch to the blower motor. I got the ac going last summer but i think the compressor may have crapped out. Im just going for heat now :-)

Someday maybe a manual setup.

" straighten up that star on the grill, assholes."

lgreeley83
02-11-2014, 10:31 AM #171

I was playing with that thing on the thermostat housing and I heard a clicking, for now I just have power straight to the fan.

I will likely get rid of the ccu like simple did or something similar. Maybe a switch for the monovalve and a switch to the blower motor. I got the ac going last summer but i think the compressor may have crapped out. Im just going for heat now :-)

Someday maybe a manual setup.


" straighten up that star on the grill, assholes."

Simpler=Better
PORTED HEAD

2,127
02-11-2014, 10:22 PM #172
I ran a caveman HVAC system in my w123 in it's final days. Switch for the blower, and bypassed the monovalve with a piece of pipe. The vents were zip tied open and the outlets were used to regulate flow. Stuffed the under seat vents with paper towels. It burned up the "20A" switch pretty quick so use a relay

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
02-11-2014, 10:22 PM #172

I ran a caveman HVAC system in my w123 in it's final days. Switch for the blower, and bypassed the monovalve with a piece of pipe. The vents were zip tied open and the outlets were used to regulate flow. Stuffed the under seat vents with paper towels. It burned up the "20A" switch pretty quick so use a relay


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

DeliveryValve
Superturbo

1,338
02-12-2014, 02:46 AM #173
(02-11-2014, 10:26 AM)JB3 ...
latest is no heat above 60mph.

Classic Monovalve issue.

(02-11-2014, 10:31 AM)lgreeley83 ....
Someday maybe a manual setup.

There is a nice 240 at the yard right now... Can hook ya up!
This post was last modified: 02-12-2014, 02:49 AM by DeliveryValve.

Gota love Mercedes Diesels!



.
DeliveryValve
02-12-2014, 02:46 AM #173

(02-11-2014, 10:26 AM)JB3 ...
latest is no heat above 60mph.

Classic Monovalve issue.

(02-11-2014, 10:31 AM)lgreeley83 ....
Someday maybe a manual setup.

There is a nice 240 at the yard right now... Can hook ya up!


Gota love Mercedes Diesels!



.

Simpler=Better
PORTED HEAD

2,127
02-12-2014, 01:00 PM #174
*cough*cough* manual control set *cough*

http://www.superturbodiesel.com/std/Thre...everything

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
02-12-2014, 01:00 PM #174

*cough*cough* manual control set *cough*

http://www.superturbodiesel.com/std/Thre...everything


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

lgreeley83
Mr. Rumbles

775
02-12-2014, 01:13 PM #175
I should probably kick myself for not immediately saying yes. I'll ask offline what you would say cost is....I know that is a beast of a job. Lol my first couple weeks on peach parts I think someone cussed me out for asking to buy an HVAC part. I'm like "yo chill slut I just wanted the bezel"

Anyhow I know that's an ugly task....interested but wouldn't wish it on on enemy. I will tale manual window cranks for sure though if you see those. I already have the proper door panels just need all the conversion hardware.

*take* not tale
This post was last modified: 02-12-2014, 01:14 PM by lgreeley83.

" straighten up that star on the grill, assholes."

lgreeley83
02-12-2014, 01:13 PM #175

I should probably kick myself for not immediately saying yes. I'll ask offline what you would say cost is....I know that is a beast of a job. Lol my first couple weeks on peach parts I think someone cussed me out for asking to buy an HVAC part. I'm like "yo chill slut I just wanted the bezel"

Anyhow I know that's an ugly task....interested but wouldn't wish it on on enemy. I will tale manual window cranks for sure though if you see those. I already have the proper door panels just need all the conversion hardware.


*take* not tale


" straighten up that star on the grill, assholes."

JustPassinThru
W123 and W124

491
02-12-2014, 01:16 PM #176
(02-12-2014, 01:13 PM)lgreeley83 I should probably kick myself for not immediately saying yes. I'll ask offline what you would say cost is....I know that is a beast of a job. Lol my first couple weeks on peach parts I think someone cussed me out for asking to buy an HVAC part. I'm like "yo chill slut I just wanted the bezel"

Anyhow I know that's an ugly task....interested but wouldn't wish it on on enemy. I will tale manual window cranks for sure though if you see those. I already have the proper door panels just need all the conversion hardware.

*take* not tale

I've got four doors which have manual window cranks, the vinyl on the handles is palomino and one crank handle is missing the vinyl cover. What's it worth to ya, for me to pull 'em and ship 'em?

Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
02-12-2014, 01:16 PM #176

(02-12-2014, 01:13 PM)lgreeley83 I should probably kick myself for not immediately saying yes. I'll ask offline what you would say cost is....I know that is a beast of a job. Lol my first couple weeks on peach parts I think someone cussed me out for asking to buy an HVAC part. I'm like "yo chill slut I just wanted the bezel"

Anyhow I know that's an ugly task....interested but wouldn't wish it on on enemy. I will tale manual window cranks for sure though if you see those. I already have the proper door panels just need all the conversion hardware.

*take* not tale

I've got four doors which have manual window cranks, the vinyl on the handles is palomino and one crank handle is missing the vinyl cover. What's it worth to ya, for me to pull 'em and ship 'em?


Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).

lgreeley83
Mr. Rumbles

775
02-13-2014, 01:10 PM #177
#caveman lol
   

" straighten up that star on the grill, assholes."

lgreeley83
02-13-2014, 01:10 PM #177

#caveman lol
   


" straighten up that star on the grill, assholes."

lgreeley83
Mr. Rumbles

775
02-26-2014, 09:12 PM #178
Man i gotta catch up part of this typing is to remind myself

-Need to buy flexible section off turbo, also bracket that holds to manifold.
-Need to buy 240d auto trans mount (what i need for my 4 speed right?) the PO fabbed up a goofy mount. I am trying to get the shakes rattles and general noise that shouldn't be there gone. I feel my shifter move a little when i gas or let off.
-4 manual window cranks regulators and handles. (justpassinthrough i read about 15 each in a junkyard?)

Need to fix rusty floors still
Need tie rod and alignment
Need to swap on 126 calipers and rotors
Need to fix leaky exhaust
Need to get rid of hammer time noises (proper trans mount, maybe balancing drive shaft)
Need heat
Need to fix tach and gauge lights
Need emergency break
Need to install shutoff valve in key tumbler

Want intercooler
Want body work

" straighten up that star on the grill, assholes."

lgreeley83
02-26-2014, 09:12 PM #178

Man i gotta catch up part of this typing is to remind myself

-Need to buy flexible section off turbo, also bracket that holds to manifold.
-Need to buy 240d auto trans mount (what i need for my 4 speed right?) the PO fabbed up a goofy mount. I am trying to get the shakes rattles and general noise that shouldn't be there gone. I feel my shifter move a little when i gas or let off.
-4 manual window cranks regulators and handles. (justpassinthrough i read about 15 each in a junkyard?)

Need to fix rusty floors still
Need tie rod and alignment
Need to swap on 126 calipers and rotors
Need to fix leaky exhaust
Need to get rid of hammer time noises (proper trans mount, maybe balancing drive shaft)
Need heat
Need to fix tach and gauge lights
Need emergency break
Need to install shutoff valve in key tumbler

Want intercooler
Want body work


" straighten up that star on the grill, assholes."

JustPassinThru
W123 and W124

491
02-26-2014, 10:05 PM #179
(02-26-2014, 09:12 PM)lgreeley83 Man i gotta catch up part of this typing is to remind myself
-4 manual window cranks regulators and handles. (justpassinthrough i read about 15 each in a junkyard?)

On second thought...I think $60 is how much Greazzer sold a set of four for, a couple years ago. But I think I'll see first if I can sell the doors as they are, on local CL. These doors are in really nice shape --paint and interior vinyl are immaculate, even the armrests and door pockets. The door-closers are nearly new, front door mirrors are choice. It would be a shame to break them up for junkyard value.

Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
02-26-2014, 10:05 PM #179

(02-26-2014, 09:12 PM)lgreeley83 Man i gotta catch up part of this typing is to remind myself
-4 manual window cranks regulators and handles. (justpassinthrough i read about 15 each in a junkyard?)

On second thought...I think $60 is how much Greazzer sold a set of four for, a couple years ago. But I think I'll see first if I can sell the doors as they are, on local CL. These doors are in really nice shape --paint and interior vinyl are immaculate, even the armrests and door pockets. The door-closers are nearly new, front door mirrors are choice. It would be a shame to break them up for junkyard value.


Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).

lgreeley83
Mr. Rumbles

775
02-26-2014, 10:07 PM #180
No rush

" straighten up that star on the grill, assholes."

lgreeley83
02-26-2014, 10:07 PM #180

No rush


" straighten up that star on the grill, assholes."

JB3
Superturbo

1,795
02-28-2014, 10:22 AM #181
You need to put some moving blankets over the rust holes. In addition to the cold, the noise of it really wears on the driver. I put something like 10k on a 240 with no passenger floor in it, making 300+ mile runs at a time, and the drone would continue in my dreams and into the next morning as background noise.

1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

JB3
02-28-2014, 10:22 AM #181

You need to put some moving blankets over the rust holes. In addition to the cold, the noise of it really wears on the driver. I put something like 10k on a 240 with no passenger floor in it, making 300+ mile runs at a time, and the drone would continue in my dreams and into the next morning as background noise.


1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

JB3
Superturbo

1,795
03-17-2014, 06:56 AM #182
Related to your manual steering swap, remember how we both incorrectly clocked the steering wheel? mine was out nearly 90 degrees

Just had an alignment done and they were able to straighten the steering wheel amazingly. I didn't even have to admit it was my fault either, good stuff.

1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

JB3
03-17-2014, 06:56 AM #182

Related to your manual steering swap, remember how we both incorrectly clocked the steering wheel? mine was out nearly 90 degrees

Just had an alignment done and they were able to straighten the steering wheel amazingly. I didn't even have to admit it was my fault either, good stuff.


1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

lgreeley83
Mr. Rumbles

775
05-01-2015, 07:00 AM #183
Long time no see. Still alive and well. Done some small stuff. Drive shaft u joint was toast. Replacement long piece went in. I didn't balance but my rattle is gone. My car is apart now in prep to put an HX30. I am trying to reclock the exhaust side of the turbo but it's stuck right now. Have 4an line for that.

" straighten up that star on the grill, assholes."

lgreeley83
05-01-2015, 07:00 AM #183

Long time no see. Still alive and well. Done some small stuff. Drive shaft u joint was toast. Replacement long piece went in. I didn't balance but my rattle is gone. My car is apart now in prep to put an HX30. I am trying to reclock the exhaust side of the turbo but it's stuck right now. Have 4an line for that.


" straighten up that star on the grill, assholes."

MFSuper90
Budget Builder

1,533
05-01-2015, 06:14 PM #184
I had to heat my hx30 Housing with a torch to get it to reclock

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
05-01-2015, 06:14 PM #184

I had to heat my hx30 Housing with a torch to get it to reclock


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

lgreeley83
Mr. Rumbles

775
05-01-2015, 06:58 PM #185
Is there a positioning notch? I was trying to hammer it off, pb blaster, torch. Didn't budge. I'm going to try table vise and belt cheater bar or something. I don't Know.
This post was last modified: 05-01-2015, 06:59 PM by lgreeley83.

" straighten up that star on the grill, assholes."

lgreeley83
05-01-2015, 06:58 PM #185

Is there a positioning notch? I was trying to hammer it off, pb blaster, torch. Didn't budge. I'm going to try table vise and belt cheater bar or something. I don't Know.


" straighten up that star on the grill, assholes."

lgreeley83
Mr. Rumbles

775
05-28-2015, 06:51 PM #186
Well I did get the turbo clocked a few weeks back. Ended up using a pocket knife and hammer to wedge it apart. Intercooler came in the mail today. Now waiting for pipes and couplers.

" straighten up that star on the grill, assholes."

lgreeley83
05-28-2015, 06:51 PM #186

Well I did get the turbo clocked a few weeks back. Ended up using a pocket knife and hammer to wedge it apart. Intercooler came in the mail today. Now waiting for pipes and couplers.


" straighten up that star on the grill, assholes."

lgreeley83
Mr. Rumbles

775
06-15-2015, 07:46 AM #187
Shit video 1982 Mercedes 300d: https://youtu.be/qBYlUoD4Bwk

" straighten up that star on the grill, assholes."

lgreeley83
06-15-2015, 07:46 AM #187

Shit video 1982 Mercedes 300d: https://youtu.be/qBYlUoD4Bwk


" straighten up that star on the grill, assholes."

lgreeley83
Mr. Rumbles

775
06-15-2015, 08:18 AM #188
done some work lately. Finished HX30 install. Front mount intercooler installed. New drive shaft. Crappy video above is of the sweet sounds brought to you by Holset ;-)
   
   

" straighten up that star on the grill, assholes."

lgreeley83
06-15-2015, 08:18 AM #188

done some work lately. Finished HX30 install. Front mount intercooler installed. New drive shaft. Crappy video above is of the sweet sounds brought to you by Holset ;-)
   
   


" straighten up that star on the grill, assholes."

led-panzer
Holset

541
06-15-2015, 08:39 AM #189
Looks great man! You should have significantly more power now.

Do you have plans for the clutch?

1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
led-panzer
06-15-2015, 08:39 AM #189

Looks great man! You should have significantly more power now.

Do you have plans for the clutch?


1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake

lgreeley83
Mr. Rumbles

775
06-15-2015, 09:16 AM #190
Eventually, ill have to do the research and get the clutch chosen. Did you get yours in yet? My car is still driveable as is with current clutch so it will probably be on the back burner for a bit. Trying to buy a house right now. Wife will kill me if I spend any more ;-)

Car is definitely a lot better with the intercooler. EGT doesn't get much over 1000 at extended full throttle, 25 psi boost. Before I couldn't go much more than 10 secs before getting up to the 1250 range. Boost comes in pretty quick too. No complaints with the HX30 yet. I've only got a few drives with it. I will need to tune a little and see if I even need that much boost.

" straighten up that star on the grill, assholes."

lgreeley83
06-15-2015, 09:16 AM #190

Eventually, ill have to do the research and get the clutch chosen. Did you get yours in yet? My car is still driveable as is with current clutch so it will probably be on the back burner for a bit. Trying to buy a house right now. Wife will kill me if I spend any more ;-)

Car is definitely a lot better with the intercooler. EGT doesn't get much over 1000 at extended full throttle, 25 psi boost. Before I couldn't go much more than 10 secs before getting up to the 1250 range. Boost comes in pretty quick too. No complaints with the HX30 yet. I've only got a few drives with it. I will need to tune a little and see if I even need that much boost.


" straighten up that star on the grill, assholes."

MFSuper90
Budget Builder

1,533
06-15-2015, 11:01 PM #191
(06-15-2015, 09:16 AM)lgreeley83 Eventually, ill have to do the research and get the clutch chosen. Did you get yours in yet?  My car is still driveable as is with current clutch so it will probably be on the back burner for a bit. Trying to buy a house right now. Wife will kill me if I spend any more ;-)

Car is definitely a lot better with the intercooler.  EGT doesn't get much over 1000 at extended full throttle, 25 psi boost. Before I couldn't go much more than 10 secs before getting up to the 1250 range. Boost comes in pretty quick too. No complaints with the HX30 yet. I've only got a few drives with it. I will need to tune a little and see if I even need that much boost.

Stock modded pump, and my a/w and I have seen 1300 on real hard pull up a steep hill. That's at 18psi, sometime in the future is like to see how more boost effects egts. But I don't really think my a\w is as efficient as a good a/a setup. Mainly because of the lack of Surface area.

But my holset swap was worth it in my opinion for the sound. Man, it sings well Big Grin

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
06-15-2015, 11:01 PM #191

(06-15-2015, 09:16 AM)lgreeley83 Eventually, ill have to do the research and get the clutch chosen. Did you get yours in yet?  My car is still driveable as is with current clutch so it will probably be on the back burner for a bit. Trying to buy a house right now. Wife will kill me if I spend any more ;-)

Car is definitely a lot better with the intercooler.  EGT doesn't get much over 1000 at extended full throttle, 25 psi boost. Before I couldn't go much more than 10 secs before getting up to the 1250 range. Boost comes in pretty quick too. No complaints with the HX30 yet. I've only got a few drives with it. I will need to tune a little and see if I even need that much boost.

Stock modded pump, and my a/w and I have seen 1300 on real hard pull up a steep hill. That's at 18psi, sometime in the future is like to see how more boost effects egts. But I don't really think my a\w is as efficient as a good a/a setup. Mainly because of the lack of Surface area.

But my holset swap was worth it in my opinion for the sound. Man, it sings well Big Grin


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

Simpler=Better
PORTED HEAD

2,127
06-16-2015, 12:51 PM #192
(02-13-2014, 01:10 PM)lgreeley83 #caveman lol

The HVAC of a man who has both given up, and found zen, all at once.


(Don't feel bad my DD has a similar setup for now)

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
06-16-2015, 12:51 PM #192

(02-13-2014, 01:10 PM)lgreeley83 #caveman lol

The HVAC of a man who has both given up, and found zen, all at once.


(Don't feel bad my DD has a similar setup for now)


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

lgreeley83
Mr. Rumbles

775
06-16-2015, 06:52 PM #193
(06-16-2015, 12:51 PM)Simpler=Better
(02-13-2014, 01:10 PM)lgreeley83 #caveman lol

The HVAC of a man who has both given up, and found zen, all at once.


(Don't feel bad my DD has a similar setup for now)

I burned up the motor doing that ;-) greazzer is hooking me up with another one.

I haven't looked at wiring diagrams yet but I should do something other than straight 12volt from the battery right? How'd you do yours simple? I'm removing the hvac control unit amd don't want to fry another one.

Im really getting the car to full simple status. Thinking of removing stock wiring harness all together to do it my way.

" straighten up that star on the grill, assholes."

lgreeley83
06-16-2015, 06:52 PM #193

(06-16-2015, 12:51 PM)Simpler=Better
(02-13-2014, 01:10 PM)lgreeley83 #caveman lol

The HVAC of a man who has both given up, and found zen, all at once.


(Don't feel bad my DD has a similar setup for now)

I burned up the motor doing that ;-) greazzer is hooking me up with another one.

I haven't looked at wiring diagrams yet but I should do something other than straight 12volt from the battery right? How'd you do yours simple? I'm removing the hvac control unit amd don't want to fry another one.

Im really getting the car to full simple status. Thinking of removing stock wiring harness all together to do it my way.


" straighten up that star on the grill, assholes."

Simpler=Better
PORTED HEAD

2,127
06-16-2015, 09:37 PM #194
I did mine straight like yours, but the switch's shitty resistance slowed it down. Still burned it up though.

Unless you have a manual climate control ready to go leave the harness. Or just run a hi/low switch to the factory resistor block.

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
06-16-2015, 09:37 PM #194

I did mine straight like yours, but the switch's shitty resistance slowed it down. Still burned it up though.

Unless you have a manual climate control ready to go leave the harness. Or just run a hi/low switch to the factory resistor block.


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

Greazzer
Superturbo

1,277
06-17-2015, 10:04 AM #195
You should have the blower motor either Saturday or Monday ...

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Greazzer
06-17-2015, 10:04 AM #195

You should have the blower motor either Saturday or Monday ...


Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...

Pages (4): Previous 1 2 3 4
 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)