Norwegian OM606 build
Norwegian OM606 build
Time for some update here
Big changes in plans!
Pump is ready, 270cc and 7700-8000rpm+ ( we don`t know what max rpm is because Dieselmekens test bench wasn`t strong enough to take it up to more than around 3800 pump rpm)
Spesial grinded tractorpuller style camshaft, very light guvenor, 8mm elements, spesial deliveryvalves+++
Picture of pump:
Stock guvenor weight:
Modified:
(This is the old one that mantahead had in his pump)
I built the pump my self with some help from gøran:
Grinded camshaft:
Video of pump test
Turbo setup will be Spesial Holset HE300WG with billet 85mm compwheel and a 8cm housing! This one has better spec than the hx40 super^^
The turbo comes straight from the Holset development department
This will be compounded with the hx60. Water/meth injection between the two stages.
Setup will be like this:
The header will be kinda spesial and Very high flowing, i can promiss that
Rods is under construction, Autoverdi is making them! They promiss that they will hold over 1000hp and over 8000rpm despite these heavy td pistons!
Head will be converted to mechanical lifters and very spesial camshafts.
Rear end will proberly converted to the 210mm MB diff with a ratio of 2.2:1
Stay tuned for more photos of fun!