Norwegian OM606 build
Norwegian OM606 build
Now is the rear end modified and stronger
Let the pictures tell the story!
w124 (185mm diff) vs w129(210mm diff) flanges
125mm flange vs 102mm flange
Custom driveshaft-flange with a 125mm flange
A custom w124 differential
Now over to the driveshafts....
To pieces welded togheter, then i make shure that they are strait before i weld them all the way
Welded axels
Then i macined the weld down to the same diameter as the axel. Then i press a pipe/bushing over the joint and weld that one as well. Now the joint it self are stronger than the axel.
Here is to finished axels, and you see the pipe i welded over the joint.
Finished axels