Norwegian OM606 build
Norwegian OM606 build
(12-27-2011, 11:47 PM)bad3gakk A buddy of mine ran his 606 with hx40 (19ccm turbine) and a 3" downpipe.. that created too much backpressure.. he only got 2,2bars manifoil pressure.. another buddie of mine ran his 603 with 0,5mm smaller pump elements, a little smaller turbine, and 4" downpipe and exhaust, and got 3,5+ bars...Sounds nice, how many hp did you buddy`s OM606 make?
You might concider building a bigger DP... i got myself 2m of straight 4", and 2 mandrel bendt 90's for christmas it turned out to be a beatiful peice of metal in the end, and will help my 605 sing beautiful serenades
(12-28-2011, 05:30 AM)jeemu Hope those rods hold up. Piston+pin is wery heavy
On my 605 i had 2.7-3.2bar boost and back pressure with 3.5" DP was 1.8-2.2bar
(12-27-2011, 11:47 PM)bad3gakk A buddy of mine ran his 606 with hx40 (19ccm turbine) and a 3" downpipe.. that created too much backpressure.. he only got 2,2bars manifoil pressure.. another buddie of mine ran his 603 with 0,5mm smaller pump elements, a little smaller turbine, and 4" downpipe and exhaust, and got 3,5+ bars...Sounds nice, how many hp did you buddy`s OM606 make?
You might concider building a bigger DP... i got myself 2m of straight 4", and 2 mandrel bendt 90's for christmas it turned out to be a beatiful peice of metal in the end, and will help my 605 sing beautiful serenades
(12-28-2011, 05:30 AM)jeemu Hope those rods hold up. Piston+pin is wery heavy
On my 605 i had 2.7-3.2bar boost and back pressure with 3.5" DP was 1.8-2.2bar