STD Tuning Drivetrain Clutch upgrade.

Clutch upgrade.

Clutch upgrade.

 
  • 0 Vote(s) - 0 Average
 
winmutt
bitbanger

3,468
04-16-2009, 01:09 PM #1
The Gwagen has a 23cm clutch. The W123 has a 21cm clutch. I am unsure if it requires a fly wheel as the ring gear for the starter would have to be the same size right? Anyone have a flywheel laying around they can measure the inner diameter and mounting bolt diameters? I think the gwagen has a tinner wall on the flywheel. I have seen one fly wheel that was unlike the other 617's. Seemed longer and more angled.
This post was last modified: 04-16-2009, 01:28 PM by winmutt.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
04-16-2009, 01:09 PM #1

The Gwagen has a 23cm clutch. The W123 has a 21cm clutch. I am unsure if it requires a fly wheel as the ring gear for the starter would have to be the same size right? Anyone have a flywheel laying around they can measure the inner diameter and mounting bolt diameters? I think the gwagen has a tinner wall on the flywheel. I have seen one fly wheel that was unlike the other 617's. Seemed longer and more angled.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

winmutt
bitbanger

3,468
04-16-2009, 01:58 PM #2
We have a winner!

Thanks to liet @ http://www.peachparts.com/shopforum/show...p?t=249391

[Image: gwagen-flywheel.jpg]

Now to find me some fly wheels.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
04-16-2009, 01:58 PM #2

We have a winner!

Thanks to liet @ http://www.peachparts.com/shopforum/show...p?t=249391

[Image: gwagen-flywheel.jpg]

Now to find me some fly wheels.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

kamel
Naturally-aspirated SUCKS

176
04-16-2009, 04:08 PM #3
There was one floating on ebay not too long ago. Now what about a upgrade clutch that would work with the 240d flywheel and slave cylinder, sprinter maybe?

'78 300D, OM617.912: 4spd manual, TB03 at 10PSI, 26*BTDC, DV's turned, HVAC, emissions system removed, e-fan, short ram, 3" downpipe to straight exhaust, W126 Bendix brakes, MR2 Spyder seats. 2890lbs
kamel
04-16-2009, 04:08 PM #3

There was one floating on ebay not too long ago. Now what about a upgrade clutch that would work with the 240d flywheel and slave cylinder, sprinter maybe?


'78 300D, OM617.912: 4spd manual, TB03 at 10PSI, 26*BTDC, DV's turned, HVAC, emissions system removed, e-fan, short ram, 3" downpipe to straight exhaust, W126 Bendix brakes, MR2 Spyder seats. 2890lbs

winmutt
bitbanger

3,468
04-16-2009, 04:11 PM #4
(04-16-2009, 04:08 PM)kamel There was one floating on ebay not too long ago. Now what about a upgrade clutch that would work with the 240d flywheel and slave cylinder, sprinter maybe?

Slave is the same afaik. The sprinter friction disk fits but offers no more surface area. FI found a stage 2 puck disk but its a puck and its pricey.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
04-16-2009, 04:11 PM #4

(04-16-2009, 04:08 PM)kamel There was one floating on ebay not too long ago. Now what about a upgrade clutch that would work with the 240d flywheel and slave cylinder, sprinter maybe?

Slave is the same afaik. The sprinter friction disk fits but offers no more surface area. FI found a stage 2 puck disk but its a puck and its pricey.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

Graminal95
K26-2

48
04-16-2009, 06:47 PM #5
I should ask a buddy of mine who has a place to get custom disc's made. I think my race disc was like 140 bucks. Its a organic friction material with 6 super heavy springs and the Saab V4 spline. Maybe they can make something for our diesels. I'll ask next time I speak with him.
Graminal95
04-16-2009, 06:47 PM #5

I should ask a buddy of mine who has a place to get custom disc's made. I think my race disc was like 140 bucks. Its a organic friction material with 6 super heavy springs and the Saab V4 spline. Maybe they can make something for our diesels. I'll ask next time I speak with him.

kamel
Naturally-aspirated SUCKS

176
04-17-2009, 01:51 AM #6
140 is a reasonable price as a new stock 240d is $120 from autohaus. I don't want to be changing mine every year.

'78 300D, OM617.912: 4spd manual, TB03 at 10PSI, 26*BTDC, DV's turned, HVAC, emissions system removed, e-fan, short ram, 3" downpipe to straight exhaust, W126 Bendix brakes, MR2 Spyder seats. 2890lbs
kamel
04-17-2009, 01:51 AM #6

140 is a reasonable price as a new stock 240d is $120 from autohaus. I don't want to be changing mine every year.


'78 300D, OM617.912: 4spd manual, TB03 at 10PSI, 26*BTDC, DV's turned, HVAC, emissions system removed, e-fan, short ram, 3" downpipe to straight exhaust, W126 Bendix brakes, MR2 Spyder seats. 2890lbs

ForcedInduction
Banned

3,628
04-17-2009, 02:04 AM #7
(04-17-2009, 01:51 AM)kamel 140 is a reasonable price as a new stock 240d is $120 from autohaus. I don't want to be changing mine every year.

I have over 3 years and 30k miles on mine with zero problems.
ForcedInduction
04-17-2009, 02:04 AM #7

(04-17-2009, 01:51 AM)kamel 140 is a reasonable price as a new stock 240d is $120 from autohaus. I don't want to be changing mine every year.

I have over 3 years and 30k miles on mine with zero problems.

kamel
Naturally-aspirated SUCKS

176
04-18-2009, 01:38 AM #8
Maybe winmutt has a "sticky" throttle. Big Grin
This post was last modified: 04-18-2009, 01:39 AM by kamel.

'78 300D, OM617.912: 4spd manual, TB03 at 10PSI, 26*BTDC, DV's turned, HVAC, emissions system removed, e-fan, short ram, 3" downpipe to straight exhaust, W126 Bendix brakes, MR2 Spyder seats. 2890lbs
kamel
04-18-2009, 01:38 AM #8

Maybe winmutt has a "sticky" throttle. Big Grin


'78 300D, OM617.912: 4spd manual, TB03 at 10PSI, 26*BTDC, DV's turned, HVAC, emissions system removed, e-fan, short ram, 3" downpipe to straight exhaust, W126 Bendix brakes, MR2 Spyder seats. 2890lbs

winmutt
bitbanger

3,468
04-18-2009, 08:12 AM #9
Sticky? Its an on off switch right?

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
04-18-2009, 08:12 AM #9

Sticky? Its an on off switch right?


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

willbhere4u
Six in a row make her go!

2,507
05-01-2009, 09:57 AM #10
At the race shop we use to machine the fly wheel height to get the stock pressure plate to clap harder more pressure on the disk so it would pass tech inspection with stock parts for spec miata

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
05-01-2009, 09:57 AM #10

At the race shop we use to machine the fly wheel height to get the stock pressure plate to clap harder more pressure on the disk so it would pass tech inspection with stock parts for spec miata


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

winmutt
bitbanger

3,468
05-01-2009, 12:59 PM #11
This is the mounting height? That is an interesting idea. Do you think any machine shop would do this while I am getting it resurfaced?

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
05-01-2009, 12:59 PM #11

This is the mounting height? That is an interesting idea. Do you think any machine shop would do this while I am getting it resurfaced?


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

winmutt
bitbanger

3,468
05-13-2009, 03:36 PM #12
If you build it they will come.

I put the order in today with Classic Parts. Cost is somewhere around $900. Not for the light hearted. Of course I will probably have to get a flex disc upgrade.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
05-13-2009, 03:36 PM #12

If you build it they will come.

I put the order in today with Classic Parts. Cost is somewhere around $900. Not for the light hearted. Of course I will probably have to get a flex disc upgrade.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

willbhere4u
Six in a row make her go!

2,507
05-16-2009, 07:12 PM #13
They are supposed to deck both surfaces equally when they do the fly wheel! you can ask for a little more not sure how much you should do? you don't want to go past the cam in the pressure plate? I think it was only a couple of thousandths but made a difference in the spec miata's im in the same boat just got a fly wheel from a 1969 220d and it needs to be surfaced!

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
05-16-2009, 07:12 PM #13

They are supposed to deck both surfaces equally when they do the fly wheel! you can ask for a little more not sure how much you should do? you don't want to go past the cam in the pressure plate? I think it was only a couple of thousandths but made a difference in the spec miata's im in the same boat just got a fly wheel from a 1969 220d and it needs to be surfaced!


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

SurfRodder
Jackass Extraordinaire

611
05-18-2009, 02:44 PM #14
I just got my G clutch and flywheel in (from the ebay guy in Germany... offroad-world is his screen name) on friday... Gonna have it resurfaced and balanced and then swap it for my 240 setup when I get the time...

W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
SurfRodder
05-18-2009, 02:44 PM #14

I just got my G clutch and flywheel in (from the ebay guy in Germany... offroad-world is his screen name) on friday... Gonna have it resurfaced and balanced and then swap it for my 240 setup when I get the time...


W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62

winmutt
bitbanger

3,468
05-18-2009, 10:11 PM #15
(05-18-2009, 02:44 PM)SurfRodder I just got my G clutch and flywheel in (from the ebay guy in Germany... offroad-world is his screen name) on friday... Gonna have it resurfaced and balanced and then swap it for my 240 setup when I get the time...

I decided to go the expensive route and get everything NIB OE. offroad-world wants $400 for a worn looking flywheel, I paid ~$500 for a brand new one. Someone should tell him the bottom just dropped out of his market.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
05-18-2009, 10:11 PM #15

(05-18-2009, 02:44 PM)SurfRodder I just got my G clutch and flywheel in (from the ebay guy in Germany... offroad-world is his screen name) on friday... Gonna have it resurfaced and balanced and then swap it for my 240 setup when I get the time...

I decided to go the expensive route and get everything NIB OE. offroad-world wants $400 for a worn looking flywheel, I paid ~$500 for a brand new one. Someone should tell him the bottom just dropped out of his market.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

SurfRodder
Jackass Extraordinaire

611
05-19-2009, 11:48 PM #16
(05-18-2009, 10:11 PM)winmutt I decided to go the expensive route and get everything NIB OE. offroad-world wants $400 for a worn looking flywheel, I paid ~$500 for a brand new one. Someone should tell him the bottom just dropped out of his market.

yeah, i figured i'd just bite the bullet and put the part #s out there so others could do the research and buy stateside... i got mine for 300 and got a clutch kit for around 300 as well... my local parts guys can get any numbers i give them, but I wasnt sure if the whole shebang would fit inside the 240 bell... the guy asked around and was able to confirm fitment for a 240 tranny...

W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
SurfRodder
05-19-2009, 11:48 PM #16

(05-18-2009, 10:11 PM)winmutt I decided to go the expensive route and get everything NIB OE. offroad-world wants $400 for a worn looking flywheel, I paid ~$500 for a brand new one. Someone should tell him the bottom just dropped out of his market.

yeah, i figured i'd just bite the bullet and put the part #s out there so others could do the research and buy stateside... i got mine for 300 and got a clutch kit for around 300 as well... my local parts guys can get any numbers i give them, but I wasnt sure if the whole shebang would fit inside the 240 bell... the guy asked around and was able to confirm fitment for a 240 tranny...


W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62

winmutt
bitbanger

3,468
05-20-2009, 01:22 PM #17
A large box was sighted on my doorstep.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
05-20-2009, 01:22 PM #17

A large box was sighted on my doorstep.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

winmutt
bitbanger

3,468
05-20-2009, 08:08 PM #18
It's heavy. It's steel. It's SHINY this piss ass poor pic does nothing for it.

[Image: om617.952.23cm.flywheel.jpg]

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
05-20-2009, 08:08 PM #18

It's heavy. It's steel. It's SHINY this piss ass poor pic does nothing for it.

[Image: om617.952.23cm.flywheel.jpg]


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

SurfRodder
Jackass Extraordinaire

611
05-20-2009, 08:28 PM #19
(05-20-2009, 08:08 PM)winmutt It's heavy. It's steel. It's SHINY this piss ass poor pic does nothing for it.

[Image: om617.952.23cm.flywheel.jpg]

she's a beaut' alright!

W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
SurfRodder
05-20-2009, 08:28 PM #19

(05-20-2009, 08:08 PM)winmutt It's heavy. It's steel. It's SHINY this piss ass poor pic does nothing for it.

[Image: om617.952.23cm.flywheel.jpg]

she's a beaut' alright!


W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62

winmutt
bitbanger

3,468
06-07-2009, 09:16 PM #20
Its a smoother ride and the gwagen clutch grabs with ease. Normally getting on to the ramps was a bit of a struggle, now I feel like I have a Gwagen! Downside, turbo lag from low rpm in 3rd is worse. 200D flywheel just revs faster. Well worth the effort, maybe not so much on the money.
This post was last modified: 06-12-2009, 01:33 PM by winmutt.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
06-07-2009, 09:16 PM #20

Its a smoother ride and the gwagen clutch grabs with ease. Normally getting on to the ramps was a bit of a struggle, now I feel like I have a Gwagen! Downside, turbo lag from low rpm in 3rd is worse. 200D flywheel just revs faster. Well worth the effort, maybe not so much on the money.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

winmutt
bitbanger

3,468
06-12-2009, 01:35 PM #21
Everyone loves pics.

[Image: Rolf%20014.jpg]
[Image: Rolf%20017.jpg]
[Image: Rolf%20018.jpg]
So SHINY!
[Image: Rolf%20019.jpg]

Bigger is better!
[Image: Rolf%20031.jpg]

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
06-12-2009, 01:35 PM #21

Everyone loves pics.

[Image: Rolf%20014.jpg]
[Image: Rolf%20017.jpg]
[Image: Rolf%20018.jpg]
So SHINY!
[Image: Rolf%20019.jpg]

Bigger is better!
[Image: Rolf%20031.jpg]


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

winmutt
bitbanger

3,468
06-14-2009, 07:25 AM #23
I paid the same and mine came with pretty MBZ holograms.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
06-14-2009, 07:25 AM #23

I paid the same and mine came with pretty MBZ holograms.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

SurfRodder
Jackass Extraordinaire

611
07-09-2009, 04:58 PM #24
huh.. he jacked the price up a bit.. either that or he gave me a non-fleabay special price...

W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
SurfRodder
07-09-2009, 04:58 PM #24

huh.. he jacked the price up a bit.. either that or he gave me a non-fleabay special price...


W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62

winmutt
bitbanger

3,468
07-09-2009, 05:58 PM #25
Yours was not a gwagen flywheel was it?

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
07-09-2009, 05:58 PM #25

Yours was not a gwagen flywheel was it?


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

SurfRodder
Jackass Extraordinaire

611
07-11-2009, 02:13 AM #26
yeah, got the G clutch kit and a used flywheel for ~750, but that included shipping for each... he had to ship 2 packages due to excessive weight tho...

W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
SurfRodder
07-11-2009, 02:13 AM #26

yeah, got the G clutch kit and a used flywheel for ~750, but that included shipping for each... he had to ship 2 packages due to excessive weight tho...


W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62

winmutt
bitbanger

3,468
07-11-2009, 06:58 AM #27
That is about right, mine was all new in box from MBUSA for $200 more. They had to ship from Germany and were nice enough to waive the core charges (which I thought was pretty fantastic). I really love the guys (Thomas in particular) at Classic Parts.
This post was last modified: 07-11-2009, 06:59 AM by winmutt.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
07-11-2009, 06:58 AM #27

That is about right, mine was all new in box from MBUSA for $200 more. They had to ship from Germany and were nice enough to waive the core charges (which I thought was pretty fantastic). I really love the guys (Thomas in particular) at Classic Parts.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

300sd/5speed
Naturally-aspirated

13
10-27-2016, 05:05 PM #28
Hi Winmutt 
i know this was a long time ago but, can tell me what the difference was with g wagon flywheel? I too have been using a lighter flywheel actually an m110 flywheel so alot lighter, with the m110 flywheel it drives great almost no turbo lag even with a hx35, the problem is there is quite alot of driveline vibrations and loud gear chatter in neutral at idle, did you have the getrag rattle before after changing to the heavy flywheel? Any other observations would be greatly appreciated.
Cheers
300sd/5speed
10-27-2016, 05:05 PM #28

Hi Winmutt 
i know this was a long time ago but, can tell me what the difference was with g wagon flywheel? I too have been using a lighter flywheel actually an m110 flywheel so alot lighter, with the m110 flywheel it drives great almost no turbo lag even with a hx35, the problem is there is quite alot of driveline vibrations and loud gear chatter in neutral at idle, did you have the getrag rattle before after changing to the heavy flywheel? Any other observations would be greatly appreciated.
Cheers

SurfRodder
Jackass Extraordinaire

611
01-29-2017, 10:29 PM #29
(10-27-2016, 05:05 PM)300sd/5speed Hi Winmutt 
i know this was a long time ago but, can tell me what the difference was with g wagon flywheel? I too have been using a lighter flywheel actually an m110 flywheel so alot lighter, with the m110 flywheel it drives great almost no turbo lag even with a hx35, the problem is there is quite alot of driveline vibrations and loud gear chatter in neutral at idle, did you have the getrag rattle before after changing to the heavy flywheel? Any other observations would be greatly appreciated.
Cheers

I know this is a couple of months old, but the heavier flywheel really helps balance out the om617.  My main complaint after the manual swap was off idle vibration and tendency to stumble.  With the heavier flywheel it was WAY smoother to ease onto the throttle from a stop.  There is a slight reduction in acceleration as there is more mass to get spooled.  

There may be a problem with your trans if you have a lot of NVH at idle.  When was the last time it had motor mounts?  If they were recently done, were they oem?  I think worn rack damper bolt is also more noticeable with a manual and that may need replaced (Id do it if you have not ready done it).

W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
SurfRodder
01-29-2017, 10:29 PM #29

(10-27-2016, 05:05 PM)300sd/5speed Hi Winmutt 
i know this was a long time ago but, can tell me what the difference was with g wagon flywheel? I too have been using a lighter flywheel actually an m110 flywheel so alot lighter, with the m110 flywheel it drives great almost no turbo lag even with a hx35, the problem is there is quite alot of driveline vibrations and loud gear chatter in neutral at idle, did you have the getrag rattle before after changing to the heavy flywheel? Any other observations would be greatly appreciated.
Cheers

I know this is a couple of months old, but the heavier flywheel really helps balance out the om617.  My main complaint after the manual swap was off idle vibration and tendency to stumble.  With the heavier flywheel it was WAY smoother to ease onto the throttle from a stop.  There is a slight reduction in acceleration as there is more mass to get spooled.  

There may be a problem with your trans if you have a lot of NVH at idle.  When was the last time it had motor mounts?  If they were recently done, were they oem?  I think worn rack damper bolt is also more noticeable with a manual and that may need replaced (Id do it if you have not ready done it).


W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 6 Guest(s)
Users browsing this thread:
 6 Guest(s)