FS: 82+ W123 ACC parts
FS: 82+ W123 ACC parts
Knee panel insulation pads, both sides. Complete, not cut or torn.
Floor vent ducts.
Defroster vents.
Heater box to center vents rubber boot, no tears.
95% complete ACC wiring harness. Only cut at the fusebox connections.
Both control modules. Unknown operation.
ACC button cluster. Good cosmetic condition, unknown operation.
Glowplug relays. 1982 300TD, 1980 240D. Both good.
Heater box assy.
Blower. Works, made no noise when I tested it.
Heater core. No leaks, good condition, entire cooling system had rusty coolant.
Evaporator. Unknown condition.
Solenoid bank. First solenoid has top nipple broken off. I have a spare to replace the broken one.
Light spider assy and fiber optic tubes. Spider has one light retaining tab broken.
Vacuum actuators. All working.
Black dash cover.
If you see any parts in the pictures that you want and I didn't list, ask.
ForcedInduction
04-09-2009, 04:08 AM
#1
All these parts are from my 1982 300D except the glowplug relays. Make an offer on what you want.
Knee panel insulation pads, both sides. Complete, not cut or torn.
Floor vent ducts.
Defroster vents.
Heater box to center vents rubber boot, no tears.
95% complete ACC wiring harness. Only cut at the fusebox connections.
Both control modules. Unknown operation.
ACC button cluster. Good cosmetic condition, unknown operation.
Glowplug relays. 1982 300TD, 1980 240D. Both good.
Heater box assy.
Blower. Works, made no noise when I tested it.
Heater core. No leaks, good condition, entire cooling system had rusty coolant.
Evaporator. Unknown condition.
Solenoid bank. First solenoid has top nipple broken off. I have a spare to replace the broken one.
Light spider assy and fiber optic tubes. Spider has one light retaining tab broken.
Vacuum actuators. All working.
Black dash cover.
If you see any parts in the pictures that you want and I didn't list, ask.
ForcedInduction
04-09-2009, 06:10 PM
#3
Sorry, but it looks like a local friend may have claimed most of it. I'll repost anything left. He has helped me out quite a bit on my 300D for next to nothing and I thought I'd give him first pick.
'78 300D, OM617.912: 4spd manual, TB03 at 10PSI, 26*BTDC, DV's turned, HVAC, emissions system removed, e-fan, short ram, 3" downpipe to straight exhaust, W126 Bendix brakes, MR2 Spyder seats. 2890lbs
Would you like mine? I didn't know people actually want stuff that weighs down our cars.
'78 300D, OM617.912: 4spd manual, TB03 at 10PSI, 26*BTDC, DV's turned, HVAC, emissions system removed, e-fan, short ram, 3" downpipe to straight exhaust, W126 Bendix brakes, MR2 Spyder seats. 2890lbs
1 Guest(s)
1 Guest(s)