STD Other Open home made drip tool

home made drip tool

home made drip tool

 
  • 0 Vote(s) - 0 Average
 
larsalan
Superturbo

1,272
11-27-2011, 07:34 PM #1
Can you make your own drip tool? I have a set of hard lines for an om617. I was hoping I could just bend/cut one and make the tool.

Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
larsalan
11-27-2011, 07:34 PM #1

Can you make your own drip tool? I have a set of hard lines for an om617. I was hoping I could just bend/cut one and make the tool.


Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'

winmutt
bitbanger

3,468
11-27-2011, 08:24 PM #2
(11-27-2011, 07:34 PM)larsalan Can you make your own drip tool? I have a set of hard lines for an om617. I was hoping I could just bend/cut one and make the tool.

thats all thats needed. fsm spec 120* angle on the cut

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
11-27-2011, 08:24 PM #2

(11-27-2011, 07:34 PM)larsalan Can you make your own drip tool? I have a set of hard lines for an om617. I was hoping I could just bend/cut one and make the tool.

thats all thats needed. fsm spec 120* angle on the cut


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

larsalan
Superturbo

1,272
11-27-2011, 08:28 PM #3
Yeah, thanks. I am just reading a long winded discussion about it at pp.
Real problem has been reaching one of these 3 bolts that's hidden right behind this '85 electronic dodad.
I think I need to get one of these u-joint extensions for my socket. I have tried like 3 or 4 times to reach at it with different straight extensions and always leave without success.

Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
larsalan
11-27-2011, 08:28 PM #3

Yeah, thanks. I am just reading a long winded discussion about it at pp.
Real problem has been reaching one of these 3 bolts that's hidden right behind this '85 electronic dodad.
I think I need to get one of these u-joint extensions for my socket. I have tried like 3 or 4 times to reach at it with different straight extensions and always leave without success.


Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'

bricktron
'77 240D

174
08-05-2015, 10:36 PM #4
does it have to be a particular one of the five hard lines that gets cut?


english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates




bricktron
08-05-2015, 10:36 PM #4

does it have to be a particular one of the five hard lines that gets cut?



english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates




Torkey
Dirty Diesel

220
08-13-2015, 10:57 PM #5
Anyone will do.  I don't use a cut line I just undo the first injector and time the drips from there.  Works like a charm. 

79 300CD
82 300SD
Dirty Little Freaks Racing
Torkey
08-13-2015, 10:57 PM #5

Anyone will do.  I don't use a cut line I just undo the first injector and time the drips from there.  Works like a charm. 


79 300CD
82 300SD
Dirty Little Freaks Racing

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)