STD Tuning Brakes hydroboost?

hydroboost?

hydroboost?

 
  • 0 Vote(s) - 0 Average
 
lpumb3
617 300sd

141
02-16-2013, 10:34 AM #17
(12-29-2011, 08:54 PM)kmaser I measured the bore on the MB master cylinder and used a GM cylinder with the same bore and similar setup. On the backside it came with a yoke that hooked right up, only things I had to do was re-drill the adapter plate to match my firewall and made adapter brake lines with metric on one end and standard on the other. They supplied the correct flare nuts, I bent new lines, flared, installed and bled the brakes and steering system. The lines on the MB pump are standard hydraulic fitting but on the steering box it was not so I had to cut the end off and weld on a JIC fitting which was $20.00 at the local hydraulic shop.
very cool , i plan to do this as well, but a quick qauestion

i lost you at the lines on the mb pump ? th power steering pump ? did the kit come with a t fitting to pull high pressure to the booster ?
and you mentioned welding to the box , im assuming the return line fitting ?
lpumb3
02-16-2013, 10:34 AM #17

(12-29-2011, 08:54 PM)kmaser I measured the bore on the MB master cylinder and used a GM cylinder with the same bore and similar setup. On the backside it came with a yoke that hooked right up, only things I had to do was re-drill the adapter plate to match my firewall and made adapter brake lines with metric on one end and standard on the other. They supplied the correct flare nuts, I bent new lines, flared, installed and bled the brakes and steering system. The lines on the MB pump are standard hydraulic fitting but on the steering box it was not so I had to cut the end off and weld on a JIC fitting which was $20.00 at the local hydraulic shop.
very cool , i plan to do this as well, but a quick qauestion

i lost you at the lines on the mb pump ? th power steering pump ? did the kit come with a t fitting to pull high pressure to the booster ?
and you mentioned welding to the box , im assuming the return line fitting ?

 
  • 0 Vote(s) - 0 Average

Messages In This Thread
hydroboost? - by dropnosky - 11-07-2011, 05:54 PM
RE: hydroboost? - by iheartboost - 11-07-2011, 06:57 PM
RE: hydroboost? - by DeliveryValve - 11-07-2011, 08:08 PM
RE: hydroboost? - by waz - 11-07-2011, 09:11 PM
RE: hydroboost? - by DeliveryValve - 11-07-2011, 09:41 PM
RE: hydroboost? - by Captain America - 11-08-2011, 02:57 AM
RE: hydroboost? - by willbhere4u - 11-08-2011, 04:10 PM
RE: hydroboost? - by yankneck696 - 11-24-2011, 06:43 AM
RE: hydroboost? - by kmaser - 12-18-2011, 02:21 PM
RE: hydroboost? - by dropnosky - 12-20-2011, 08:30 AM
RE: hydroboost? - by kmaser - 12-25-2011, 10:46 AM
RE: hydroboost? - by dropnosky - 12-26-2011, 10:51 AM
RE: hydroboost? - by kmaser - 12-29-2011, 08:54 PM
RE: hydroboost? - by Freefuel - 07-01-2012, 09:18 AM
RE: hydroboost? - by lpumb3 - 02-16-2013, 10:34 AM
RE: hydroboost? - by sassparilla_kid - 01-17-2013, 11:38 AM
RE: hydroboost? - by raysorenson - 01-19-2013, 04:24 PM
RE: hydroboost? - by Edian727 - 08-28-2014, 12:47 AM
RE: hydroboost? - by swampmonkey - 08-29-2014, 06:53 AM
RE: hydroboost? - by Simpler=Better - 08-29-2014, 08:13 AM
RE: hydroboost? - by swampmonkey - 08-29-2014, 08:33 AM
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)