STD Tuning Engine OM603 - 7.5mm elements - HE351Ve VNT

OM603 - 7.5mm elements - HE351Ve VNT

OM603 - 7.5mm elements - HE351Ve VNT

 
  • 0 Vote(s) - 0 Average
 
oel_brenner
GT2256V

146
11-01-2011, 04:48 PM #1
set of 7.5mm elements ordered today from Tomnik
should be shipping in the next few days.

I will document progress here

current plan is to use Holset HE351Ve VNT
and A/W intercooler.





cars
1991 W126 350SDL turbodiesel
1987 W124 E300D turbodiesel
1987 W126 300SDL turbodiesel
1984 W107 SL300D turbodiesel
1974 W115 /8 300D diesel

trucks
2001 Dodge RAM 3500 4x4 Cummins turbodiesel

boats
1974 Uniflite "Salty Dog" powered by
2x OM617.951 Mercedes Benz 5Cyl turbodiesels
oel_brenner
11-01-2011, 04:48 PM #1

set of 7.5mm elements ordered today from Tomnik
should be shipping in the next few days.

I will document progress here

current plan is to use Holset HE351Ve VNT
and A/W intercooler.





cars
1991 W126 350SDL turbodiesel
1987 W124 E300D turbodiesel
1987 W126 300SDL turbodiesel
1984 W107 SL300D turbodiesel
1974 W115 /8 300D diesel

trucks
2001 Dodge RAM 3500 4x4 Cummins turbodiesel

boats
1974 Uniflite "Salty Dog" powered by
2x OM617.951 Mercedes Benz 5Cyl turbodiesels

E300TSC
Turbo-Supercharged

321
11-07-2011, 08:35 PM #2
Sounds like a good combination! Best of luck!

1998 MB E300 - 194,000 miles. Current/future mods: 7.5mm pump elements, Holset HX40 Turbo feeding Eaton M90 supercharger through custom fabbed intake system. Aeroturbine muffler, scratch-built 4" stainless exhaust. EGR eliminated, ECM recalibrated, modified rack position feedback circuit. Porterfield RS brake pads, Bilstein sport shocks, VDO EGT, oil and boost gauges.

2000 Ford F250 - 150,000 miles. Current/future mods: DP Tuner 3 map chip, scratch-built high flow intake, high output IDM, open circuit fuel system, ball bearing turbo, South Bend full metal clutch, slotted and drilled rotors. Autometer Sport Comp EGT and boost gauges.
E300TSC
11-07-2011, 08:35 PM #2

Sounds like a good combination! Best of luck!


1998 MB E300 - 194,000 miles. Current/future mods: 7.5mm pump elements, Holset HX40 Turbo feeding Eaton M90 supercharger through custom fabbed intake system. Aeroturbine muffler, scratch-built 4" stainless exhaust. EGR eliminated, ECM recalibrated, modified rack position feedback circuit. Porterfield RS brake pads, Bilstein sport shocks, VDO EGT, oil and boost gauges.

2000 Ford F250 - 150,000 miles. Current/future mods: DP Tuner 3 map chip, scratch-built high flow intake, high output IDM, open circuit fuel system, ball bearing turbo, South Bend full metal clutch, slotted and drilled rotors. Autometer Sport Comp EGT and boost gauges.

oel_brenner
GT2256V

146
11-16-2011, 08:11 PM #3
elements have arrived

Thanks tomnik !
Attached Files
Image(s)
   

cars
1991 W126 350SDL turbodiesel
1987 W124 E300D turbodiesel
1987 W126 300SDL turbodiesel
1984 W107 SL300D turbodiesel
1974 W115 /8 300D diesel

trucks
2001 Dodge RAM 3500 4x4 Cummins turbodiesel

boats
1974 Uniflite "Salty Dog" powered by
2x OM617.951 Mercedes Benz 5Cyl turbodiesels
oel_brenner
11-16-2011, 08:11 PM #3

elements have arrived

Thanks tomnik !

Attached Files
Image(s)
   

cars
1991 W126 350SDL turbodiesel
1987 W124 E300D turbodiesel
1987 W126 300SDL turbodiesel
1984 W107 SL300D turbodiesel
1974 W115 /8 300D diesel

trucks
2001 Dodge RAM 3500 4x4 Cummins turbodiesel

boats
1974 Uniflite "Salty Dog" powered by
2x OM617.951 Mercedes Benz 5Cyl turbodiesels

nilsson
Naturally-aspirated

4
11-17-2011, 02:05 AM #4
What kind of control will you use on the vgt turbo?

/nilsson
nilsson
11-17-2011, 02:05 AM #4

What kind of control will you use on the vgt turbo?

/nilsson

iheartboost
Holset

422
11-17-2011, 10:45 PM #5
i will have to see how this goes. i may end up using a he35 vnt if it turns out well. they are readily available as far as i can see

1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car

iheartboost
11-17-2011, 10:45 PM #5

i will have to see how this goes. i may end up using a he35 vnt if it turns out well. they are readily available as far as i can see


1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car

dieselmeken
Holset

407
11-18-2011, 03:13 AM #6
(11-16-2011, 08:11 PM)oel_brenner elements have arrived

Thanks tomnik !

Now, all you need is someone that can do the elementswap properly.

dieselmeken
11-18-2011, 03:13 AM #6

(11-16-2011, 08:11 PM)oel_brenner elements have arrived

Thanks tomnik !

Now, all you need is someone that can do the elementswap properly.

tomnik
Holset

587
11-18-2011, 04:44 AM #7
my question also but as he got the stuff sent to the US he might have a plan...

Tom
tomnik
11-18-2011, 04:44 AM #7

my question also but as he got the stuff sent to the US he might have a plan...

Tom

IngenjörDiesel
Unregistered

 
02-28-2012, 01:45 PM #8
(11-16-2011, 08:11 PM)oel_brenner elements have arrived

Thanks tomnik !

what is the price for the elements? (=
IngenjörDiesel
02-28-2012, 01:45 PM #8

(11-16-2011, 08:11 PM)oel_brenner elements have arrived

Thanks tomnik !

what is the price for the elements? (=

oel_brenner
GT2256V

146
03-26-2012, 09:35 PM #9
updates on my project here
http://oelbrenner.tumblr.com/

Ill try to also post some updates here, but its a lot easier with the tumblr iphone app

cars
1991 W126 350SDL turbodiesel
1987 W124 E300D turbodiesel
1987 W126 300SDL turbodiesel
1984 W107 SL300D turbodiesel
1974 W115 /8 300D diesel

trucks
2001 Dodge RAM 3500 4x4 Cummins turbodiesel

boats
1974 Uniflite "Salty Dog" powered by
2x OM617.951 Mercedes Benz 5Cyl turbodiesels
oel_brenner
03-26-2012, 09:35 PM #9

updates on my project here
http://oelbrenner.tumblr.com/

Ill try to also post some updates here, but its a lot easier with the tumblr iphone app


cars
1991 W126 350SDL turbodiesel
1987 W124 E300D turbodiesel
1987 W126 300SDL turbodiesel
1984 W107 SL300D turbodiesel
1974 W115 /8 300D diesel

trucks
2001 Dodge RAM 3500 4x4 Cummins turbodiesel

boats
1974 Uniflite "Salty Dog" powered by
2x OM617.951 Mercedes Benz 5Cyl turbodiesels

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)