Purple turbo 240D
Purple turbo 240D
Replaced my old primer pump with the new bosch ones hoping that my rough idle was due to air in the system.
I Know for a fact I have air in the system because the little primary filter is not filled all the way.
Not sure if the new CAT water separator i installed is filled with air but i dont feel like taking it apart as it is messy with its setup.
anything I can try? ive been priming with the pump for at least an hour and i dont hear that nice buzzing sound indicating the air is bled.
EDIT:
just took a look, the filter has a small banjo bolt i unplug that put in a funnel in there and used some veggie oil in there since i dont have any diesel lying around. I primed the pump and bubbles came out, think I should do that a few more times. But if anyone has a better idea, let me know