Mad Boy *prototype* Governorweight
Mad Boy *prototype* Governorweight
10-05-2011, 06:06 AM
#1
)This is my prototype governorweight for M-seriepumps with RSF governor
It´s peeled down from 90 mm to 80 mm, 4 12 mm holes are drilled.
The goal is to get at least 6500-7000 rpm on the engine.
I will report back when the pump is calibratet.
It sure looks like a mad boy doesent it?
This post was last modified: 10-05-2011, 06:07 AM by dieselmeken.
dieselmeken
10-05-2011, 06:06 AM #1NOTE This is for race only ( or if you need a lot of rpm )
This is my prototype governorweight for M-seriepumps with RSF governor
It´s peeled down from 90 mm to 80 mm, 4 12 mm holes are drilled.
The goal is to get at least 6500-7000 rpm on the engine.
I will report back when the pump is calibratet.
It sure looks like a mad boy doesent it?
![[Image: FalkonSig.png]](http://i160.photobucket.com/albums/t162/DanielWGK2/designs/FalkonSig.png)
10-05-2011, 07:37 AM
#4
Dieselmeken you sir are awesome!
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
10-05-2011, 07:37 AM #46500-7000 holy shit!!! My gas four banger only revs to 7k!
Dieselmeken you sir are awesome!
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
10-05-2011, 08:55 AM
#6
(10-05-2011, 08:35 AM)winmutt Wont these kinds of RPMs cause other kinds of issues like valve float etc?
This is nothing to just bolt on in a stockengine, it demands a lot of work. Valvsprings, rods etc.
I just build the pump for my customers, some of them want to go high i rpm, how they do with the engine is up to them.
dieselmeken
10-05-2011, 08:55 AM #6(10-05-2011, 08:35 AM)winmutt Wont these kinds of RPMs cause other kinds of issues like valve float etc?
This is nothing to just bolt on in a stockengine, it demands a lot of work. Valvsprings, rods etc.
I just build the pump for my customers, some of them want to go high i rpm, how they do with the engine is up to them.
10-05-2011, 01:50 PM
#7
(10-05-2011, 08:35 AM)winmutt Wont these kinds of RPMs cause other kinds of issues like valve float etc?This revs 7500rpm and has "jeemu" style valve springs, so here is bolt on setup on 605/6 engines.
http://www.youtube.com/watch?v=NbShuHhQq...r_embedded
Ooh that sound of six
This post was last modified: 10-05-2011, 01:52 PM by jeemu.
OM605 600hp diesel drag car build with BMW E30 chassis
(10-05-2011, 08:35 AM)winmutt Wont these kinds of RPMs cause other kinds of issues like valve float etc?This revs 7500rpm and has "jeemu" style valve springs, so here is bolt on setup on 605/6 engines.
http://www.youtube.com/watch?v=NbShuHhQq...r_embedded
Ooh that sound of six
OM605 600hp diesel drag car build with BMW E30 chassis
10-05-2011, 02:17 PM
#8
This post was last modified: 10-05-2011, 02:19 PM by iheartboost.
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
10-05-2011, 02:17 PM #8edit- never mind you said 606
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
10-05-2011, 09:08 PM
#9
(10-05-2011, 01:50 PM)jeemu Ooh that sound of six
Ooooh the sound of that knock at the beggining.
Still quite bad ass obviously.
Are you running double springs?
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
10-06-2011, 12:11 AM
#10
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
I want a 606 so bad now.....
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
10-06-2011, 09:26 AM
#11
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
10-06-2011, 09:26 AM #11dam that is bad ass
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
10-06-2011, 01:51 PM
#12
OM605 600hp diesel drag car build with BMW E30 chassis
10-06-2011, 02:38 PM
#13
Mb 1984 w201 om603 swap.
Mb 1986 w201 190E 2.3-16v
Mb 2004 w203 C230k
George3soccer
10-06-2011, 02:38 PM #13I would love to be able to make that kin of power at those Roma.
Mb 1984 w201 om603 swap.
Mb 1986 w201 190E 2.3-16v
Mb 2004 w203 C230k
10-07-2011, 04:27 PM
#14
18 seconds! Holy cow.How does it drive?
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
10-07-2011, 04:27 PM #14Spool for days! 18 seconds! Holy cow.
How does it drive?
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
10-09-2011, 10:58 PM
#15
basic setup rundown?
cars? what cars? WHERE???
randomdude
10-09-2011, 10:58 PM #15OH.MY.GOD jeemu. sweet beautiful baby jeebuz.
basic setup rundown?
cars? what cars? WHERE???
10-10-2011, 07:27 AM
#16
(10-09-2011, 10:58 PM)randomdude OH.MY.GOD jeemu. sweet beautiful baby jeebuz.Not my car, just sold some parts on that.
basic setup rundown?
OM605 600hp diesel drag car build with BMW E30 chassis
(10-09-2011, 10:58 PM)randomdude OH.MY.GOD jeemu. sweet beautiful baby jeebuz.Not my car, just sold some parts on that.
basic setup rundown?
OM605 600hp diesel drag car build with BMW E30 chassis
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)