USA W124/OM606 daily driver/superturbo project
USA W124/OM606 daily driver/superturbo project
01-22-2012, 12:32 PM
#21
(12-14-2011, 08:00 PM)Hario Awesome project! Keeping an eye on this one.
If its no trouble would you mind posting the OD of the EGR flanges on your manifolds? Im devising a V-band block to accompany an EGR delete on my E300.
Also impressive sized parts cleaner I see, we use the domestic-dishwasher-parts-cleaner..
My experience of using the 722.6 it is a very good transmision!
H.
I can get the OD of the EGR flange on the OM606.910, the EGR flange on the OM606.962 is not readily accessible at this point since the engine is installed in the car. If the measurement from the OM606.910 will suffice, let me know. My digital calipers were left out in the cold shop...I'm currently allowing them to warm up so that they'll function with weak batteries.
The parts washer is a 40-gallon unit I bought on a clearance (scratch-n-dent) sale from Tractor Supply Co.:
http://www.tractorsupply.com/jobsmart-re...l--3900801
So far, I really like it. Money well spent even if I don't use it every time I'm out in the shop.
The 722.6 is indeed a good transmission. In the meantime, I'm going to figure out how good the 722.4 is.
After the pan has been full of oil for quite some time - no leaks at all from the spot I welded. I have a few leaks coming from the oil pan bolts in the rear...I didn't put any RTV on those bolts. Lesson learned.
It has been cold out lately - not much work in the garage. I'm a big baby when it comes to temperature extremes. When I was younger, it never used to bother me.
Beers,
Matt
'07 W211 OM642
'95 W124.131/722.435, 211k - daily driver/Superturbo project - OM606.962 with "M" pump...under construction! (build thread here)
'99 W210.025 - gone, but not forgotten
'94 Dodge/Cummins - gone, but not forgotten
HoleshotHolset
01-22-2012, 12:32 PM #21(12-14-2011, 08:00 PM)Hario Awesome project! Keeping an eye on this one.
If its no trouble would you mind posting the OD of the EGR flanges on your manifolds? Im devising a V-band block to accompany an EGR delete on my E300.
Also impressive sized parts cleaner I see, we use the domestic-dishwasher-parts-cleaner..
My experience of using the 722.6 it is a very good transmision!
H.
I can get the OD of the EGR flange on the OM606.910, the EGR flange on the OM606.962 is not readily accessible at this point since the engine is installed in the car. If the measurement from the OM606.910 will suffice, let me know. My digital calipers were left out in the cold shop...I'm currently allowing them to warm up so that they'll function with weak batteries.
The parts washer is a 40-gallon unit I bought on a clearance (scratch-n-dent) sale from Tractor Supply Co.:
http://www.tractorsupply.com/jobsmart-re...l--3900801
So far, I really like it. Money well spent even if I don't use it every time I'm out in the shop.
The 722.6 is indeed a good transmission. In the meantime, I'm going to figure out how good the 722.4 is.
After the pan has been full of oil for quite some time - no leaks at all from the spot I welded. I have a few leaks coming from the oil pan bolts in the rear...I didn't put any RTV on those bolts. Lesson learned.
It has been cold out lately - not much work in the garage. I'm a big baby when it comes to temperature extremes. When I was younger, it never used to bother me.
Beers,
Matt
'07 W211 OM642
'95 W124.131/722.435, 211k - daily driver/Superturbo project - OM606.962 with "M" pump...under construction! (build thread here)
'99 W210.025 - gone, but not forgotten
'94 Dodge/Cummins - gone, but not forgotten
Messages In This Thread
USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 08-21-2011, 01:30 PM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 08-22-2011, 07:11 AM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 08-27-2011, 10:28 AM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 08-28-2011, 10:46 PM
RE: USA W124/OM606 daily driver/superturbo project - by E300TSC - 08-29-2011, 03:58 PM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 08-31-2011, 06:30 AM
RE: USA W124/OM606 daily driver/superturbo project - by winmutt - 09-01-2011, 01:39 PM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 09-05-2011, 10:39 AM
RE: USA W124/OM606 daily driver/superturbo project - by DeliveryValve - 09-05-2011, 07:45 PM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 09-05-2011, 08:00 PM
RE: USA W124/OM606 daily driver/superturbo project - by jonbobshinigin - 09-06-2011, 10:50 PM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 09-08-2011, 06:57 AM
RE: USA W124/OM606 daily driver/superturbo project - by johan84 - 09-14-2011, 03:28 PM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 09-14-2011, 10:38 PM
RE: USA W124/OM606 daily driver/superturbo project - by aaa - 09-15-2011, 03:36 AM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 11-10-2011, 01:21 AM
RE: USA W124/OM606 daily driver/superturbo project - by hansebanger77 - 09-19-2011, 02:55 AM
RE: USA W124/OM606 daily driver/superturbo project - by Captain America - 11-10-2011, 04:01 AM
RE: USA W124/OM606 daily driver/superturbo project - by DanielK - 11-12-2011, 12:22 PM
RE: USA W124/OM606 daily driver/superturbo project - by Hario' - 12-14-2011, 08:00 PM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 01-22-2012, 12:32 PM
RE: USA W124/OM606 daily driver/superturbo project - by jonbobshinigin - 01-23-2012, 01:14 AM
RE: USA W124/OM606 daily driver/superturbo project - by majesty78 - 01-23-2012, 03:52 AM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 01-24-2012, 10:33 AM
RE: USA W124/OM606 daily driver/superturbo project - by sassparilla_kid - 05-08-2012, 12:43 PM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 06-05-2012, 11:46 PM
RE: USA W124/OM606 daily driver/superturbo project - by johan84 - 06-15-2012, 02:36 PM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 06-17-2012, 09:47 PM
RE: USA W124/OM606 daily driver/superturbo project - by johan84 - 06-18-2012, 12:31 PM
RE: USA W124/OM606 daily driver/superturbo project - by Simpler=Better - 06-18-2012, 02:02 PM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 06-19-2012, 11:57 PM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 09-04-2012, 11:16 PM
RE: USA W124/OM606 daily driver/superturbo project - by Purplecomputer - 09-04-2012, 11:58 PM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 09-05-2012, 12:05 AM
RE: USA W124/OM606 daily driver/superturbo project - by HoleshotHolset - 09-09-2012, 11:15 PM
Users browsing this thread:
6 Guest(s)
6 Guest(s)
Users browsing this thread:
6 Guest(s)
6 Guest(s)