4 cyl perkins only firing on two cylinders at idle?
4 cyl perkins only firing on two cylinders at idle?
05-16-2011, 09:28 AM
#4
(05-15-2011, 12:57 PM)MFSuper90 When at idle cylinders 1 & 2 do not fire, but when it is at WOT it runs fine?
It's a pulling tractor, it's supposed to idle funny and then run like a recently violated primate at WOT...
Beers,
Matt
'07 W211 OM642
'95 W124.131/722.435, 211k - daily driver/Superturbo project - OM606.962 with "M" pump...under construction! (build thread here)
'99 W210.025 - gone, but not forgotten
'94 Dodge/Cummins - gone, but not forgotten
HoleshotHolset
05-16-2011, 09:28 AM #4(05-15-2011, 12:57 PM)MFSuper90 When at idle cylinders 1 & 2 do not fire, but when it is at WOT it runs fine?
It's a pulling tractor, it's supposed to idle funny and then run like a recently violated primate at WOT...
Beers,
Matt
'07 W211 OM642
'95 W124.131/722.435, 211k - daily driver/Superturbo project - OM606.962 with "M" pump...under construction! (build thread here)
'99 W210.025 - gone, but not forgotten
'94 Dodge/Cummins - gone, but not forgotten
Messages In This Thread
4 cyl perkins only firing on two cylinders at idle? - by MFSuper90 - 05-15-2011, 12:57 PM
RE: 4 cyl perkins only firing on two cylinders at idle? - by dieselboy - 05-15-2011, 06:30 PM
RE: 4 cyl perkins only firing on two cylinders at idle? - by MFSuper90 - 05-15-2011, 07:45 PM
RE: 4 cyl perkins only firing on two cylinders at idle? - by HoleshotHolset - 05-16-2011, 09:28 AM
RE: 4 cyl perkins only firing on two cylinders at idle? - by MFSuper90 - 05-16-2011, 01:56 PM
RE: 4 cyl perkins only firing on two cylinders at idle? - by Biohazard - 05-16-2011, 07:32 PM
RE: 4 cyl perkins only firing on two cylinders at idle? - by MFSuper90 - 05-16-2011, 08:19 PM
RE: 4 cyl perkins only firing on two cylinders at idle? - by john - 01-11-2014, 09:16 PM
RE: 4 cyl perkins only firing on two cylinders at idle? - by MFSuper90 - 01-13-2014, 08:41 PM
RE: 4 cyl perkins only firing on two cylinders at idle? - by hansendk - 01-15-2014, 07:35 AM
RE: 4 cyl perkins only firing on two cylinders at idle? - by MFSuper90 - 03-08-2016, 06:48 PM
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)