Turbo Information Thread (Needs your contributions!)
Turbo Information Thread (Needs your contributions!)
(05-09-2016, 11:22 AM)awsrock BW S200G, fromDeutz / Volvo engines, some 6.06 and some 7.14L
Can't find a map for it anywhere. Can't really find much of anything on it actually. I have seen a few that were not labeled EC-2, one was EC-1 and one had no number.
One user here has it on his 617 with 130-140cc and says spool starts at 1700
It might be overkill for my 603 project, but I'll give it a shot and see what happens. Looks like it is closer to an HY35 but a bit newer design. I have an HX30 now and while it would flow enough air for my needs, the exhaust side is tiny at 6cm and there really aren't many options for me to upgrade. That has a 52/65 turbine so this should still spool better for me than an HX35
(05-09-2016, 11:22 AM)awsrock BW S200G, fromDeutz / Volvo engines, some 6.06 and some 7.14L
Can't find a map for it anywhere. Can't really find much of anything on it actually. I have seen a few that were not labeled EC-2, one was EC-1 and one had no number.
One user here has it on his 617 with 130-140cc and says spool starts at 1700
It might be overkill for my 603 project, but I'll give it a shot and see what happens. Looks like it is closer to an HY35 but a bit newer design. I have an HX30 now and while it would flow enough air for my needs, the exhaust side is tiny at 6cm and there really aren't many options for me to upgrade. That has a 52/65 turbine so this should still spool better for me than an HX35