Turbo Information Thread (Needs your contributions!)
Turbo Information Thread (Needs your contributions!)
(12-29-2013, 12:40 AM)MFSuper90 I've read that they are much more susceptible to failure due to contamination, but that is anything ball bearing. Running a very small micron filter should solve that problem. But I didn't know whether they are more prone to surge because of the fast spooling nature or what.
I was just hoping to learn something new
Yes I agree with you that they can be more susceptible, just a pity Alex can not comment on it since he is working with turbos and have good insight, but I guess he is so busy. But I also fell that just to say "Ballbearing is never a good idea for a daily" in not that good
(12-29-2013, 12:40 AM)MFSuper90 I've read that they are much more susceptible to failure due to contamination, but that is anything ball bearing. Running a very small micron filter should solve that problem. But I didn't know whether they are more prone to surge because of the fast spooling nature or what.
I was just hoping to learn something new