Turbo Information Thread (Needs your contributions!)
Turbo Information Thread (Needs your contributions!)
Druk ,
i dig it , did you actuate it with a vac/boost pump to see if it acts progressive? i cant even comprehend the adjust ability you could have there with a couple spring to play with . very cool
Capt,
i was assuming the same , in the mean time . i was also able to do a bunch of porting waste gate seat 2-3mm at least. smoothed out the valve seat etc .blah blah sorry useless with out pics , but theirs a lot of meat in those little suckers that can go if you can take the time and ill be lapping the valve , or requesting while they have it . get that thing tight
any ways , its ready to rock when he gets it , but upon cleaning the waste gate/ parts i noticed that there is a small imperfection along the very edge of the diaphragm . so id like to replace it . wasn't sure if they did or didn't . it seems to be an oddball . i can only find sealed external push rod types and EWG kits with springs etc . i imagine the must =)
also , does any one know the purpose of the hole in the waste gate valve? i could blow right through the boost nipple when i did a quick reassemble? i may have put the spring seat in up side down , it was late . im not sure and that frigging spring was driving me insane . thought id ask .