Turbo Information Thread (Needs your contributions!)
Turbo Information Thread (Needs your contributions!)
I'll get the facts on my setup soon.
I'm running a om617a with a 722.1 auto.
I have a HY35 off a 98 cummins 5.9 auto.
9cm housing
Compressor inducer: 54mm
Compressor exducer: 78mm
Turbine wheel: 58/65mm
I get 10psi 2500 then it goes up to 20psi at 5000 rpm.
With a w115 intake and the intercoolet I see 1200° max egt and it actually goes down with speed. It runs around 1.05:1 drive pressure to boost at these levels.