STD Tuning Engine OM603 fule line brackets need help!

OM603 fule line brackets need help!

OM603 fule line brackets need help!

 
  • 0 Vote(s) - 0 Average
 
willbhere4u
Six in a row make her go!

2,507
03-23-2011, 07:59 PM #1
I am in desperate need of these fuel line brackets if any one has them please let me know! I will pay for them and shipping!Big Grin

I ordered new plastic clips thinking they would just clip to the lines they dont! some dumb ass removed all of the metal clips and my lines are rubbing badly!Angry

There are three small clips for the r3 rear cylinders and one long one for the front 3 cylinders and possibly one under the manifold as well I may have that one but it on backward and currently holding a wire


any help would be freaking awesome thanks Will
This post was last modified: 03-23-2011, 08:02 PM by willbhere4u.
Attached Files
Image(s)
   

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
03-23-2011, 07:59 PM #1

I am in desperate need of these fuel line brackets if any one has them please let me know! I will pay for them and shipping!Big Grin

I ordered new plastic clips thinking they would just clip to the lines they dont! some dumb ass removed all of the metal clips and my lines are rubbing badly!Angry

There are three small clips for the r3 rear cylinders and one long one for the front 3 cylinders and possibly one under the manifold as well I may have that one but it on backward and currently holding a wire


any help would be freaking awesome thanks Will

Attached Files
Image(s)
   

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

jonbobshinigin
Holset

292
03-23-2011, 09:01 PM #2
This is from GSXRs site aka Dave...I am sure he is fine with me posting them for him. I am not sure if this is exactly what you are looking for but it should help:

[Image: inj_line_clips.jpg]

[Image: inj_line_clips1.jpg]

[Image: inj_line_clips2.jpg]

[Image: inj_line_clips3.jpg]

[Image: inj_line_damage1.jpg]
This post was last modified: 03-23-2011, 09:10 PM by jonbobshinigin.

1987 300TDT - 260,000 Miles
>>275HP OM603 Project Profile here<<

jonbobshinigin
03-23-2011, 09:01 PM #2

This is from GSXRs site aka Dave...I am sure he is fine with me posting them for him. I am not sure if this is exactly what you are looking for but it should help:

[Image: inj_line_clips.jpg]

[Image: inj_line_clips1.jpg]

[Image: inj_line_clips2.jpg]

[Image: inj_line_clips3.jpg]

[Image: inj_line_damage1.jpg]


1987 300TDT - 260,000 Miles
>>275HP OM603 Project Profile here<<

willbhere4u
Six in a row make her go!

2,507
03-23-2011, 10:25 PM #3
That's a great help what is his web site?

I've got all of those plastic clips brand new! and have no way of mounting them nothing there to clip them to!

I didn't see this clip avaible 601-078-26-41

I need all of the metal bracket's the part the plastic clips connect to!

all three of the rear ones are missing! and the big one for the front three cylinders is also gone!

and the front clip on the bottom of the intake is also missing!
This post was last modified: 03-23-2011, 10:31 PM by willbhere4u.
Attached Files
Image(s)
   

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
03-23-2011, 10:25 PM #3

That's a great help what is his web site?

I've got all of those plastic clips brand new! and have no way of mounting them nothing there to clip them to!

I didn't see this clip avaible 601-078-26-41

I need all of the metal bracket's the part the plastic clips connect to!

all three of the rear ones are missing! and the big one for the front three cylinders is also gone!

and the front clip on the bottom of the intake is also missing!

Attached Files
Image(s)
   

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

babymog
K26-2

37
03-24-2011, 08:42 AM #4
I know I have the large one and at least one of the small ones on the top-side, but the finish isn't that great.

I'm out of town until Monday, can look when I get back if you haven't found some by then.

'87 300TDT "Pandora"
Garrett T-30 .55 @ 18.5psi, .970 IP @ 13.5ATDC turned up, #22 head with oblique injection, 4-puck brakes, 215 Michelins on 16x8" Bellos, updates etc.
http://www.youtube.com/watch?v=RZCI0BTWKx8
babymog
03-24-2011, 08:42 AM #4

I know I have the large one and at least one of the small ones on the top-side, but the finish isn't that great.

I'm out of town until Monday, can look when I get back if you haven't found some by then.


'87 300TDT "Pandora"
Garrett T-30 .55 @ 18.5psi, .970 IP @ 13.5ATDC turned up, #22 head with oblique injection, 4-puck brakes, 215 Michelins on 16x8" Bellos, updates etc.
http://www.youtube.com/watch?v=RZCI0BTWKx8

willbhere4u
Six in a row make her go!

2,507
03-24-2011, 09:51 AM #5
I'm checking with the dealer today but I may take you up on that depending availability

As far as the finish goes beggars cant be choosers! anythings an improvement Big Grin
This post was last modified: 03-24-2011, 09:53 AM by willbhere4u.

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
03-24-2011, 09:51 AM #5

I'm checking with the dealer today but I may take you up on that depending availability

As far as the finish goes beggars cant be choosers! anythings an improvement Big Grin


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

babymog
K26-2

37
03-24-2011, 09:57 AM #6
One of mine had the ears cut off of the manifold, ...

'87 300TDT "Pandora"
Garrett T-30 .55 @ 18.5psi, .970 IP @ 13.5ATDC turned up, #22 head with oblique injection, 4-puck brakes, 215 Michelins on 16x8" Bellos, updates etc.
http://www.youtube.com/watch?v=RZCI0BTWKx8
babymog
03-24-2011, 09:57 AM #6

One of mine had the ears cut off of the manifold, ...


'87 300TDT "Pandora"
Garrett T-30 .55 @ 18.5psi, .970 IP @ 13.5ATDC turned up, #22 head with oblique injection, 4-puck brakes, 215 Michelins on 16x8" Bellos, updates etc.
http://www.youtube.com/watch?v=RZCI0BTWKx8

willbhere4u
Six in a row make her go!

2,507
03-24-2011, 10:33 AM #7
ouch! There was an intake manifold on eBay for $169 it looked like it had all of the brackets still on it but it was still on an engine and it was from a w124 300d

http://cgi.ebay.com/ebaymotors/Mercedes-...ccessories

This post was last modified: 03-24-2011, 10:37 AM by willbhere4u.

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
03-24-2011, 10:33 AM #7

ouch! There was an intake manifold on eBay for $169 it looked like it had all of the brackets still on it but it was still on an engine and it was from a w124 300d

http://cgi.ebay.com/ebaymotors/Mercedes-...ccessories


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

winmutt
bitbanger

3,468
03-24-2011, 01:31 PM #8
Call rusty hes got those.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
03-24-2011, 01:31 PM #8

Call rusty hes got those.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

willbhere4u
Six in a row make her go!

2,507
03-24-2011, 01:49 PM #9
Thanks that's a great idea

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
03-24-2011, 01:49 PM #9

Thanks that's a great idea


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

willbhere4u
Six in a row make her go!

2,507
03-25-2011, 09:37 AM #10
My girl friend stopped by the dealer and they have them available for a lot less than I was expecting!

$7 ea for the three rear ones and $17.50 for the big one on the front!

and a spare key as well!

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
03-25-2011, 09:37 AM #10

My girl friend stopped by the dealer and they have them available for a lot less than I was expecting!

$7 ea for the three rear ones and $17.50 for the big one on the front!

and a spare key as well!


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)