STD Tuning Engine 6mm element part number?

6mm element part number?

6mm element part number?

 
  • 0 Vote(s) - 0 Average
 
winmutt
bitbanger

3,468
03-16-2011, 08:11 AM #1
Anyone know what it is? Or where a list of M elements are?

-Rolf
This post was last modified: 03-16-2011, 08:29 AM by winmutt.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
03-16-2011, 08:11 AM #1

Anyone know what it is? Or where a list of M elements are?

-Rolf


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

tomnik
Holset

587
03-16-2011, 03:55 PM #2
(03-16-2011, 08:11 AM)winmutt Anyone know what it is? Or where a list of M elements are?

-Rolf

1 418 305 552

2.3 l 4cyl turbo diesel OM601.970

Tom
tomnik
03-16-2011, 03:55 PM #2

(03-16-2011, 08:11 AM)winmutt Anyone know what it is? Or where a list of M elements are?

-Rolf

1 418 305 552

2.3 l 4cyl turbo diesel OM601.970

Tom

winmutt
bitbanger

3,468
03-16-2011, 04:07 PM #3
Is there anything bigger stock? Or a list? I now have 2 bad pumps and one good one in the works. For $12 an element I am willing to give it a try myself. Bench testing and all.

(03-16-2011, 03:55 PM)tomnik
(03-16-2011, 08:11 AM)winmutt Anyone know what it is? Or where a list of M elements are?

-Rolf

1 418 305 552

2.3 l 4cyl turbo diesel OM601.970

Tom


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
03-16-2011, 04:07 PM #3

Is there anything bigger stock? Or a list? I now have 2 bad pumps and one good one in the works. For $12 an element I am willing to give it a try myself. Bench testing and all.

(03-16-2011, 03:55 PM)tomnik
(03-16-2011, 08:11 AM)winmutt Anyone know what it is? Or where a list of M elements are?

-Rolf

1 418 305 552

2.3 l 4cyl turbo diesel OM601.970

Tom


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

tomnik
Holset

587
03-16-2011, 11:47 PM #4
Hi,

as far as I know there is nothing bigger than 6mm for M.
Except the 7mm that Mynä used/uses.
All M 6mm come without retarding edge.
Meanwhile I want a retarding edge to get the engine smooth at idle.
This might not be an issue for the 6mm but the bigger the diameter the more I want the retarded BOD at and near idle. Also to reduce quantity in that range of revs where you don't need and don't want these quantities.
Next thought is that 6mm is too small.
Not only for high power but my experience with 7 and 7.5mm comparison is the bigger the better (smoke-power relation and economy).
At least with stock engine 603a.

Tom
tomnik
03-16-2011, 11:47 PM #4

Hi,

as far as I know there is nothing bigger than 6mm for M.
Except the 7mm that Mynä used/uses.
All M 6mm come without retarding edge.
Meanwhile I want a retarding edge to get the engine smooth at idle.
This might not be an issue for the 6mm but the bigger the diameter the more I want the retarded BOD at and near idle. Also to reduce quantity in that range of revs where you don't need and don't want these quantities.
Next thought is that 6mm is too small.
Not only for high power but my experience with 7 and 7.5mm comparison is the bigger the better (smoke-power relation and economy).
At least with stock engine 603a.

Tom

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)