stan's 240D
stan's 240D
In an attempt to start being proactive, picked up a set of injectors from a 240D at the junkyard (total cost for all 4, with warranties on the 2 sketchier looking ones = ~$32). My plan is to put new nozzles in, and build a pop tester to get them all shimmed real nice. This way I can have them done and ready to go at my leisure, and not have the car offline for the whole process.
Interestingly, one of the injectors has a ton of pitting on the surface of the nozzle, and I noticed some are flat faced while others have little nublets protruding from the outlet. couple of pictures: http://imgur.com/a/LThn2