STD Tuning Drivetrain Cracked case?!

Cracked case?!

Cracked case?!

 
  • 0 Vote(s) - 0 Average
 
dieselboy
Rotatin 5500 times a minute

680
02-15-2011, 06:09 PM #1
On my way to work this morning I noticed a little smoke on the freeway and when got to my shop I saw a small trail into my parking spot. When I looked under my car I had a stream coming out of the corner of the pan. I thought the gasket came apart and was leaking. I dropped the pan and found this. WTF am I supposed to do? I have a spare trans but I think I'm going to clean out the crack and stuff some jb in it to get it back home.

Anyone seen this before?

[Image: 9304b6a4.jpg]:huh:

-Jesse

80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon

10 mistsubishi fuso service truck.
dieselboy
02-15-2011, 06:09 PM #1

On my way to work this morning I noticed a little smoke on the freeway and when got to my shop I saw a small trail into my parking spot. When I looked under my car I had a stream coming out of the corner of the pan. I thought the gasket came apart and was leaking. I dropped the pan and found this. WTF am I supposed to do? I have a spare trans but I think I'm going to clean out the crack and stuff some jb in it to get it back home.

Anyone seen this before?

[Image: 9304b6a4.jpg]:huh:


-Jesse

80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon

10 mistsubishi fuso service truck.

Biohazard
Smokin like a champ!

376
02-15-2011, 06:22 PM #2
Havent seen that before. I would agree with JB to get you home though. Sucks man. Sad

82 300SD aka The Flyin Pumpkin (Gone): 7.5mm super M-pump, T3 60 trim turbo, Coldish air intake, A/W intercooler, propane injection, SW Boost and EGT gauges, Monark 265 nozzles, ported/polished cylinder head.

84 Euro 300D 4 sp: White with black trunk and hood. Blue cloth interior. Manual everything. 300DT front swaybar. C320 17" wheels. Now with the Flyin Pumpkins engine! 
Biohazard
02-15-2011, 06:22 PM #2

Havent seen that before. I would agree with JB to get you home though. Sucks man. Sad


82 300SD aka The Flyin Pumpkin (Gone): 7.5mm super M-pump, T3 60 trim turbo, Coldish air intake, A/W intercooler, propane injection, SW Boost and EGT gauges, Monark 265 nozzles, ported/polished cylinder head.

84 Euro 300D 4 sp: White with black trunk and hood. Blue cloth interior. Manual everything. 300DT front swaybar. C320 17" wheels. Now with the Flyin Pumpkins engine! 

300D50
Graphite Moderator, ala RBMK

775
02-15-2011, 07:01 PM #3
Methinks you turned the screw out a weee bit too far, and the trans was NOT HAPPY, and made it's case known. Tongue

Sucks though, but now you have motivation to throw a 6-speed in there! Big Grin

1990 Power Ram 50 V6 SOHC 24V 6g72

I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
300D50
02-15-2011, 07:01 PM #3

Methinks you turned the screw out a weee bit too far, and the trans was NOT HAPPY, and made it's case known. Tongue

Sucks though, but now you have motivation to throw a 6-speed in there! Big Grin


1990 Power Ram 50 V6 SOHC 24V 6g72

I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.

dieselboy
Rotatin 5500 times a minute

680
02-15-2011, 07:04 PM #4
It's staying autotragic.

I put a coat of jb on it loosened the tail shaft housing and the crack closed and I then retorqued the bolt that hold the tail housing on. By torque I mean as tight as I can get them comfortably then some. I hope that will hold the fluid in enough for my 30mi drive home.
This post was last modified: 02-15-2011, 07:08 PM by dieselboy.

-Jesse

80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon

10 mistsubishi fuso service truck.
dieselboy
02-15-2011, 07:04 PM #4

It's staying autotragic.

I put a coat of jb on it loosened the tail shaft housing and the crack closed and I then retorqued the bolt that hold the tail housing on. By torque I mean as tight as I can get them comfortably then some. I hope that will hold the fluid in enough for my 30mi drive home.


-Jesse

80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon

10 mistsubishi fuso service truck.

dieselboy
Rotatin 5500 times a minute

680
02-16-2011, 01:19 AM #5
Well I got the trans out and went to put my spare in but low and behold I found chunks of alumn and small needle bearing pieces in the pan of the spare. Crap.
I tore the spare down and haven't found the source yet as I need to make a socket for the tail shaft assy to get it apart. I found nothing wrong with all the parts in the front half.

Anyone happen to have a breakdown of a r115 trans? I'll get more numbers off it tomorrow but those are the ones that stuck in my head. It's a 80' 300sd om617 turbo.

I don't know why it happened just now I've put ~2000 mi on this setup including a trip tithe drags with 6-7 passes etc... I have the pressure turned up about 2 full turns on the modulator and it's left with no vacuum source.

I was having alittle fun on the on ramp this morning wide open manual 2nd sideways around 5100rpm then I shifted into 3rd and thats when I noticed the smoke from the oil leaking and blowing back onto the exhaust.

Im thinking that 3rd gear activates that last servo on the main case and there was so much pressure that it forced the case apart and right where the crack is it's the thinnest point for the shifting rod to pass through. I'll take some pics tomorrow.
This post was last modified: 02-16-2011, 01:23 AM by dieselboy.

-Jesse

80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon

10 mistsubishi fuso service truck.
dieselboy
02-16-2011, 01:19 AM #5

Well I got the trans out and went to put my spare in but low and behold I found chunks of alumn and small needle bearing pieces in the pan of the spare. Crap.
I tore the spare down and haven't found the source yet as I need to make a socket for the tail shaft assy to get it apart. I found nothing wrong with all the parts in the front half.

Anyone happen to have a breakdown of a r115 trans? I'll get more numbers off it tomorrow but those are the ones that stuck in my head. It's a 80' 300sd om617 turbo.

I don't know why it happened just now I've put ~2000 mi on this setup including a trip tithe drags with 6-7 passes etc... I have the pressure turned up about 2 full turns on the modulator and it's left with no vacuum source.

I was having alittle fun on the on ramp this morning wide open manual 2nd sideways around 5100rpm then I shifted into 3rd and thats when I noticed the smoke from the oil leaking and blowing back onto the exhaust.

Im thinking that 3rd gear activates that last servo on the main case and there was so much pressure that it forced the case apart and right where the crack is it's the thinnest point for the shifting rod to pass through. I'll take some pics tomorrow.


-Jesse

80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon

10 mistsubishi fuso service truck.

JB3
Superturbo

1,795
02-16-2011, 10:16 AM #6
with this and all the other great destruction pics you have on the fail thread, I think you need to write a letter to Ford and MB and state your case for being hired as a field tester of products! Big Grin

1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

JB3
02-16-2011, 10:16 AM #6

with this and all the other great destruction pics you have on the fail thread, I think you need to write a letter to Ford and MB and state your case for being hired as a field tester of products! Big Grin


1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

dieselboy
Rotatin 5500 times a minute

680
02-16-2011, 09:37 PM #7
I wish.

-Jesse

80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon

10 mistsubishi fuso service truck.
dieselboy
02-16-2011, 09:37 PM #7

I wish.


-Jesse

80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon

10 mistsubishi fuso service truck.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)