STD Other Projects Hi, from the UK, it's not a Diesel, but...

Hi, from the UK, it's not a Diesel, but...

Hi, from the UK, it's not a Diesel, but...

 
  • 1 Vote(s) - 4 Average
 
fha772
K26-2

46
02-08-2011, 05:15 PM #1
Hi all,

My name is Frank, and I'm(along with my dad) a complusive car/project buyer!! We have around 25 cars and projects, between us, ranging from a 1989 Bentley Turbo R, to a 850cc Mini Pick Up.

My current Mercedes project is a W123 280E, that I bought as a parts car for £50, the previous owner sold it after he had let it stand on his driveway for 2 years, after it broke a front coil spring. When I got it home, apart from the front wings (fenders) being rotten, it is in very good condition.
I am planning to enter it in Practical Performance Car Magazine's £999 Challenge.
My plan is to fit a Toyota Supra Turbocharger to the M110 gas engine, this should give me somewhere in the region of 300+bhp (I know because I've done the same thing to a 280GE that a friend used to race).

My signiture picture is my basic plan (except for the spoilers and ground effects)

Here are a few pictures of my car as I bought it:
[Image: 130820091308.jpg]
[Image: 130820091307.jpg]
[Image: 130820091312.jpg]
It's not too bad for a £50 parts car, is it?

I don't know if this is allowed (if it's not, I'm really sorry, let me know and I'll remove it), Here's a link to my build thread on the PPC magazine forum: http://www.ppcmag.co.uk/forum/viewtopic.php?f=44&t=6743

I will be picking your brains over the next few weeks, as I get on with the build.

Thanks for reading, Frank.
fha772
02-08-2011, 05:15 PM #1

Hi all,

My name is Frank, and I'm(along with my dad) a complusive car/project buyer!! We have around 25 cars and projects, between us, ranging from a 1989 Bentley Turbo R, to a 850cc Mini Pick Up.

My current Mercedes project is a W123 280E, that I bought as a parts car for £50, the previous owner sold it after he had let it stand on his driveway for 2 years, after it broke a front coil spring. When I got it home, apart from the front wings (fenders) being rotten, it is in very good condition.
I am planning to enter it in Practical Performance Car Magazine's £999 Challenge.
My plan is to fit a Toyota Supra Turbocharger to the M110 gas engine, this should give me somewhere in the region of 300+bhp (I know because I've done the same thing to a 280GE that a friend used to race).

My signiture picture is my basic plan (except for the spoilers and ground effects)

Here are a few pictures of my car as I bought it:
[Image: 130820091308.jpg]
[Image: 130820091307.jpg]
[Image: 130820091312.jpg]
It's not too bad for a £50 parts car, is it?

I don't know if this is allowed (if it's not, I'm really sorry, let me know and I'll remove it), Here's a link to my build thread on the PPC magazine forum: http://www.ppcmag.co.uk/forum/viewtopic.php?f=44&t=6743

I will be picking your brains over the next few weeks, as I get on with the build.

Thanks for reading, Frank.

casioqv
OM602 Turbo

116
02-08-2011, 05:22 PM #2
Cool project, although that's a pretty big budget! Here we have the "24 hours of LeMONS" which is similar, but only a $500 limit (about £300).

What's involved in putting the Jaguar LSD in a W123? Are the diff housings the same, or do you need to adapt everything (driveline, diff mounts, cv joints)?

-Tyler
1984 Volvo 760GLE Turbo Diesel D24T/M46
1986 Isuzu Trooper Turbo Diesel
No mercedes (for now)
casioqv
02-08-2011, 05:22 PM #2

Cool project, although that's a pretty big budget! Here we have the "24 hours of LeMONS" which is similar, but only a $500 limit (about £300).

What's involved in putting the Jaguar LSD in a W123? Are the diff housings the same, or do you need to adapt everything (driveline, diff mounts, cv joints)?


-Tyler
1984 Volvo 760GLE Turbo Diesel D24T/M46
1986 Isuzu Trooper Turbo Diesel
No mercedes (for now)

winmutt
bitbanger

3,468
02-08-2011, 05:50 PM #3
Is that a 5 speed? Such a nice interior, such a rusty exterior.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
02-08-2011, 05:50 PM #3

Is that a 5 speed? Such a nice interior, such a rusty exterior.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

fha772
K26-2

46
02-08-2011, 06:26 PM #4
Hi, I've heard about the 24 hours of LeMons race, we've been trying to start a similar thing over here, but have had real problems getting a circuit that will let a bunch of old heaps race round their track!! So the £999 is as good as it gets at the minute. The £999, started as an article on what was the most powerful/fastest car you could buy for under £1K, it then got picked up by a few of us who read the mag, and went from there. This is the 5th year of it, we have had some very inventive winners. For example it was won 3 years ago by a reliant kitten (a very small GRP bodied hatchback with a 850cc engine) that the owner had fitted 2 bike engines in the back of!!! It did 0-60mph in under 3 secs!!!(when it could get traction!!)

I'm not 100% sure what's going to be involved in fitting the Jag PowerLok, but I will soon!!
But from what I've looked at under the car, I'm looking at welding in a cross member to bolt the diff to (like any hotrod with IRS), and then making some driveshafts using the inner half of the Jag shafts, sleeved and welded to the Merc's outer shaft sections.

It has a 5-speed gearbox, but that is going to be replaced with a Getrag Dogleg box, out of a 2.3-16v 190E, because I know from past experience that the standard box is a weak point.

TBH, the body isn't that bad, it is mainly cosmetic, the worst parts are the front wings, drivers side door, jacking points, and rear arches. This is my first job on the list.
fha772
02-08-2011, 06:26 PM #4

Hi, I've heard about the 24 hours of LeMons race, we've been trying to start a similar thing over here, but have had real problems getting a circuit that will let a bunch of old heaps race round their track!! So the £999 is as good as it gets at the minute. The £999, started as an article on what was the most powerful/fastest car you could buy for under £1K, it then got picked up by a few of us who read the mag, and went from there. This is the 5th year of it, we have had some very inventive winners. For example it was won 3 years ago by a reliant kitten (a very small GRP bodied hatchback with a 850cc engine) that the owner had fitted 2 bike engines in the back of!!! It did 0-60mph in under 3 secs!!!(when it could get traction!!)

I'm not 100% sure what's going to be involved in fitting the Jag PowerLok, but I will soon!!
But from what I've looked at under the car, I'm looking at welding in a cross member to bolt the diff to (like any hotrod with IRS), and then making some driveshafts using the inner half of the Jag shafts, sleeved and welded to the Merc's outer shaft sections.

It has a 5-speed gearbox, but that is going to be replaced with a Getrag Dogleg box, out of a 2.3-16v 190E, because I know from past experience that the standard box is a weak point.

TBH, the body isn't that bad, it is mainly cosmetic, the worst parts are the front wings, drivers side door, jacking points, and rear arches. This is my first job on the list.

300D50
Graphite Moderator, ala RBMK

775
02-09-2011, 07:21 AM #5
Pics of the micro-truck must be displayed on the hotrodcoffeeshop.com forums! Big Grin

It's ok to link build threads afaik, at least I've never had issue.

Looks to be a good contest entry, going to re-paint, or leave oem?

1990 Power Ram 50 V6 SOHC 24V 6g72

I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
300D50
02-09-2011, 07:21 AM #5

Pics of the micro-truck must be displayed on the hotrodcoffeeshop.com forums! Big Grin

It's ok to link build threads afaik, at least I've never had issue.

Looks to be a good contest entry, going to re-paint, or leave oem?


1990 Power Ram 50 V6 SOHC 24V 6g72

I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.

winmutt
bitbanger

3,468
02-09-2011, 11:35 AM #6
(02-08-2011, 06:26 PM)fha772 It has a 5-speed gearbox, but that is going to be replaced with a Getrag Dogleg box, out of a 2.3-16v 190E, because I know from past experience that the standard box is a weak point.
Wont fit without alot of work. If you do pull the 5 speed sell it to us please!

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
02-09-2011, 11:35 AM #6

(02-08-2011, 06:26 PM)fha772 It has a 5-speed gearbox, but that is going to be replaced with a Getrag Dogleg box, out of a 2.3-16v 190E, because I know from past experience that the standard box is a weak point.
Wont fit without alot of work. If you do pull the 5 speed sell it to us please!


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

fha772
K26-2

46
02-09-2011, 04:48 PM #7
The gearbox swap, isn't too much trouble, because on the M110 engine the backplate is bolted on, not cast as part of the block. I'm also using the 190E's flywheel, clutch, starter motor, and gear stick and linkages

So, my plan is, to make a new backplate for the engine, then simply bolting the flywheel onto the crank(it bolts straight on with no machining), then bolt the gearbox to it Wink
So, once the the new backplate is made, it is a straight fit to the engine, not really a conversion.Big Grin
fha772
02-09-2011, 04:48 PM #7

The gearbox swap, isn't too much trouble, because on the M110 engine the backplate is bolted on, not cast as part of the block. I'm also using the 190E's flywheel, clutch, starter motor, and gear stick and linkages

So, my plan is, to make a new backplate for the engine, then simply bolting the flywheel onto the crank(it bolts straight on with no machining), then bolt the gearbox to it Wink
So, once the the new backplate is made, it is a straight fit to the engine, not really a conversion.Big Grin

winmutt
bitbanger

3,468
02-09-2011, 04:49 PM #8
Uh isnt the starter on the wrong side?

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
02-09-2011, 04:49 PM #8

Uh isnt the starter on the wrong side?


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

fha772
K26-2

46
02-09-2011, 04:57 PM #9
That the great thing about the bolt-on backplate, basicly the outer part of the plate, will be the gearbox bellhousing pattern(along with the starter hole/mounting on the other side), and the center of the plate will be the hole for the crank, and bolt holes to fit it to the block. Big Grin
So, the starter location isn't an issue, because there is nothing in the way of it fitting on that side,esspecially seeing as the exhaust manifolds are being flipped over, so they go up and forward, to where the turbo will sit. So the exhaust isn't even in the way Wink
fha772
02-09-2011, 04:57 PM #9

That the great thing about the bolt-on backplate, basicly the outer part of the plate, will be the gearbox bellhousing pattern(along with the starter hole/mounting on the other side), and the center of the plate will be the hole for the crank, and bolt holes to fit it to the block. Big Grin
So, the starter location isn't an issue, because there is nothing in the way of it fitting on that side,esspecially seeing as the exhaust manifolds are being flipped over, so they go up and forward, to where the turbo will sit. So the exhaust isn't even in the way Wink

winmutt
bitbanger

3,468
02-10-2011, 11:21 AM #10
Heh I just spent 10 minutes looking at engine pics going, why cant I do that on a 617.... Looks like the oil filter and IP are in the way.... God that would be an easy fix....

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
02-10-2011, 11:21 AM #10

Heh I just spent 10 minutes looking at engine pics going, why cant I do that on a 617.... Looks like the oil filter and IP are in the way.... God that would be an easy fix....


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

DeliveryValve
Superturbo

1,338
02-10-2011, 12:26 PM #11
(02-10-2011, 11:21 AM)winmutt Heh I just spent 10 minutes looking at engine pics going, why cant I do that on a 617.... Looks like the oil filter and IP are in the way.... God that would be an easy fix....

I think the IP could stay and relocating the oil filter housing should be sufficient space for the starter. You do that... Hello C230 6 speed!

Wil, where's those demensions you promised us!


.

Gota love Mercedes Diesels!



.
DeliveryValve
02-10-2011, 12:26 PM #11

(02-10-2011, 11:21 AM)winmutt Heh I just spent 10 minutes looking at engine pics going, why cant I do that on a 617.... Looks like the oil filter and IP are in the way.... God that would be an easy fix....

I think the IP could stay and relocating the oil filter housing should be sufficient space for the starter. You do that... Hello C230 6 speed!

Wil, where's those demensions you promised us!


.


Gota love Mercedes Diesels!



.

winmutt
bitbanger

3,468
02-10-2011, 01:25 PM #12
I opened a new thread on it http://www.superturbodiesel.com/std/movi...-2260.html

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
02-10-2011, 01:25 PM #12

I opened a new thread on it http://www.superturbodiesel.com/std/movi...-2260.html


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

fha772
K26-2

46
08-03-2013, 07:35 AM #13
I've not been on here in a while, but I thought I'd share a few random pictures of my project do far...
[Image: null_zps302cdb88.jpg]
[Image: 775290DD-6E1D-4DD0-8698-EF1D07A870F7-922...0b0473.jpg]
[Image: 2075E5D0-1248-4BB7-B2E6-4688D1661B0E-598...d6d927.jpg]
[Image: c3f8d91a.jpg]
[Image: 132f845e.jpg]
[Image: 87ca7c31.jpg]
[Image: 4d286f61.jpg]

...and here's a picture of my Mercedes Atego tow vehicle!!!
[Image: null_zpsd3d45b3a.jpg]
fha772
08-03-2013, 07:35 AM #13

I've not been on here in a while, but I thought I'd share a few random pictures of my project do far...
[Image: null_zps302cdb88.jpg]
[Image: 775290DD-6E1D-4DD0-8698-EF1D07A870F7-922...0b0473.jpg]
[Image: 2075E5D0-1248-4BB7-B2E6-4688D1661B0E-598...d6d927.jpg]
[Image: c3f8d91a.jpg]
[Image: 132f845e.jpg]
[Image: 87ca7c31.jpg]
[Image: 4d286f61.jpg]

...and here's a picture of my Mercedes Atego tow vehicle!!!
[Image: null_zpsd3d45b3a.jpg]

MFSuper90
Budget Builder

1,533
08-08-2013, 11:39 AM #14
How did you end up doing?

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
08-08-2013, 11:39 AM #14

How did you end up doing?


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

fha772
K26-2

46
08-09-2013, 06:27 AM #15
Last year, I came 15th out of 26, so I was pretty pleased with that.
I hadn't done much to the engine then, it was still pretty much standard, I'd only uprated to W126 brakes, fitted a SPAX suspension kit, and stripped as much weight as possible.

The event got cancelled this year, but I've now stripped even more weight, and fitted the twin 50mm straight through exhaust.

Next on the list is stiffer springs (maybe coil overs), and it's getting turbocharged, which should push it from 185bhp to around 280-300bhp.
fha772
08-09-2013, 06:27 AM #15

Last year, I came 15th out of 26, so I was pretty pleased with that.
I hadn't done much to the engine then, it was still pretty much standard, I'd only uprated to W126 brakes, fitted a SPAX suspension kit, and stripped as much weight as possible.

The event got cancelled this year, but I've now stripped even more weight, and fitted the twin 50mm straight through exhaust.

Next on the list is stiffer springs (maybe coil overs), and it's getting turbocharged, which should push it from 185bhp to around 280-300bhp.

Eric78
GT2559V

198
08-11-2013, 03:08 AM #16
(02-09-2011, 07:21 AM)300D50 Pics of the micro-truck must be displayed on the hotrodcoffeeshop.com forums! Big Grin
I think this is what he meant by mini pick up.

[Image: Mini_pickup_truck.jpg]
Eric78
08-11-2013, 03:08 AM #16

(02-09-2011, 07:21 AM)300D50 Pics of the micro-truck must be displayed on the hotrodcoffeeshop.com forums! Big Grin
I think this is what he meant by mini pick up.

[Image: Mini_pickup_truck.jpg]

fha772
K26-2

46
08-11-2013, 03:47 AM #17
I've got 3 Mini pick ups, and 2 vans too!!! Wink

Edit: Here's a picture of my daily driver Mini pick up, showing it's very effective security system;
[Image: 30082007301.jpg]
(The yellow pick up under the grey car cover in the corner of the picture, is a 1969 with a rally spec 1380cc engine, box, and lsd.)
This post was last modified: 08-11-2013, 05:46 PM by fha772.
fha772
08-11-2013, 03:47 AM #17

I've got 3 Mini pick ups, and 2 vans too!!! Wink

Edit: Here's a picture of my daily driver Mini pick up, showing it's very effective security system;
[Image: 30082007301.jpg]
(The yellow pick up under the grey car cover in the corner of the picture, is a 1969 with a rally spec 1380cc engine, box, and lsd.)

MFSuper90
Budget Builder

1,533
08-12-2013, 09:19 AM #18
thats a big ass dog in a little truck! Big Grin

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
08-12-2013, 09:19 AM #18

thats a big ass dog in a little truck! Big Grin


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

fha772
K26-2

46
08-12-2013, 09:36 AM #19
He's only 220lbs, just a baby really...
fha772
08-12-2013, 09:36 AM #19

He's only 220lbs, just a baby really...

 
  • 1 Vote(s) - 4 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)