STD Tuning Engine My first W463

My first W463

My first W463

 
  • 0 Vote(s) - 0 Average
 
pako
Naturally-aspirated

5
01-23-2011, 07:21 AM #1
Hi,

I have a MB g class w463, it was a 350 turbo diesel.
But when i got the head changed, then the engine went.
So i swapt it for a om606 turbo diesel. and put the IP of the 350.
But i need some advice regarding the timing, the IP is not modified.
And do i need to time the IP as well if so can someone tell me how i should do it.
Both the timing of the engine aswell as the IP .

It is my first conversion, so i'm kinda new to it ,

and this forum is very useful, I learned a lot from all of you all.

Thank you,

Zirgham
This post was last modified: 01-23-2011, 07:39 AM by pako.
pako
01-23-2011, 07:21 AM #1

Hi,

I have a MB g class w463, it was a 350 turbo diesel.
But when i got the head changed, then the engine went.
So i swapt it for a om606 turbo diesel. and put the IP of the 350.
But i need some advice regarding the timing, the IP is not modified.
And do i need to time the IP as well if so can someone tell me how i should do it.
Both the timing of the engine aswell as the IP .

It is my first conversion, so i'm kinda new to it ,

and this forum is very useful, I learned a lot from all of you all.

Thank you,

Zirgham

Syncro_G
0-60 in 29 sec

280
01-23-2011, 09:56 AM #2
(01-23-2011, 07:21 AM)pako Hi,

I have a MB g class w463, it was a 350 turbo diesel.
But when i got the head changed, then the engine went.
So i swapt it for a om606 turbo diesel. and put the IP of the 350.
But i need some advice regarding the timing, the IP is not modified.
And do i need to time the IP as well if so can someone tell me how i should do it.
Both the timing of the engine aswell as the IP .

It is my first conversion, so i'm kinda new to it ,

and this forum is very useful, I learned a lot from all of you all.

Thank you,

Zirgham

Hi Zirgham, that's a great combination. I know a few people who have done it. both in w463 and in w460 G's. One of them is running without a computer and idles beautifully.

-------------
'84 G-Wagen turbodiesel
'75 240D 4-Speed

Syncro_G
01-23-2011, 09:56 AM #2

(01-23-2011, 07:21 AM)pako Hi,

I have a MB g class w463, it was a 350 turbo diesel.
But when i got the head changed, then the engine went.
So i swapt it for a om606 turbo diesel. and put the IP of the 350.
But i need some advice regarding the timing, the IP is not modified.
And do i need to time the IP as well if so can someone tell me how i should do it.
Both the timing of the engine aswell as the IP .

It is my first conversion, so i'm kinda new to it ,

and this forum is very useful, I learned a lot from all of you all.

Thank you,

Zirgham

Hi Zirgham, that's a great combination. I know a few people who have done it. both in w463 and in w460 G's. One of them is running without a computer and idles beautifully.


-------------
'84 G-Wagen turbodiesel
'75 240D 4-Speed

tomnik
Holset

587
01-23-2011, 10:16 AM #3
Hi,

the IP has a port for a locking device on the left side (on the thicker part of the governor).
The notch which is then visible in the bore shows the IP in 15 deg ATDC.
Lock it there and install the IP when the engine is at 15 deg ATDC on the pulley.

Tom
tomnik
01-23-2011, 10:16 AM #3

Hi,

the IP has a port for a locking device on the left side (on the thicker part of the governor).
The notch which is then visible in the bore shows the IP in 15 deg ATDC.
Lock it there and install the IP when the engine is at 15 deg ATDC on the pulley.

Tom

pako
Naturally-aspirated

5
01-23-2011, 10:46 AM #4
Thank for such a quick reply, do you have a illustration of it. that would be great.
But any way, I will try to do it. If i fail i will let you know .

Yours,

Zirgham
pako
01-23-2011, 10:46 AM #4

Thank for such a quick reply, do you have a illustration of it. that would be great.
But any way, I will try to do it. If i fail i will let you know .

Yours,

Zirgham

Spaceraver
K26-2

40
01-23-2011, 12:13 PM #5
Be very careful to run the engine if the injection time does not match. It could blow.

I wouldn't mind getting an STD..Tongue
Spaceraver
01-23-2011, 12:13 PM #5

Be very careful to run the engine if the injection time does not match. It could blow.


I wouldn't mind getting an STD..Tongue

pako
Naturally-aspirated

5
01-23-2011, 12:58 PM #6
yeah hahah i will, thanks for the advice..
Is there any way to control the boost of the Turbo.
(01-23-2011, 09:56 AM)Syncro_G
(01-23-2011, 07:21 AM)pako Hi,

I have a MB g class w463, it was a 350 turbo diesel.
But when i got the head changed, then the engine went.
So i swapt it for a om606 turbo diesel. and put the IP of the 350.
But i need some advice regarding the timing, the IP is not modified.
And do i need to time the IP as well if so can someone tell me how i should do it.
Both the timing of the engine aswell as the IP .

It is my first conversion, so i'm kinda new to it ,

and this forum is very useful, I learned a lot from all of you all.

Thank you,

Zirgham

Hi Zirgham, that's a great combination. I know a few people who have done it. both in w463 and in w460 G's. One of them is running without a computer and idles beautifully.
Thanks for the comment, do you know how they got the Pipe's for the intercooler lined up (my Intercooler is in My front bumper, It a new type bumper from 2000).
This post was last modified: 01-23-2011, 01:03 PM by pako.
pako
01-23-2011, 12:58 PM #6

yeah hahah i will, thanks for the advice..
Is there any way to control the boost of the Turbo.


(01-23-2011, 09:56 AM)Syncro_G
(01-23-2011, 07:21 AM)pako Hi,

I have a MB g class w463, it was a 350 turbo diesel.
But when i got the head changed, then the engine went.
So i swapt it for a om606 turbo diesel. and put the IP of the 350.
But i need some advice regarding the timing, the IP is not modified.
And do i need to time the IP as well if so can someone tell me how i should do it.
Both the timing of the engine aswell as the IP .

It is my first conversion, so i'm kinda new to it ,

and this forum is very useful, I learned a lot from all of you all.

Thank you,

Zirgham

Hi Zirgham, that's a great combination. I know a few people who have done it. both in w463 and in w460 G's. One of them is running without a computer and idles beautifully.
Thanks for the comment, do you know how they got the Pipe's for the intercooler lined up (my Intercooler is in My front bumper, It a new type bumper from 2000).

jeemu
"some people do, some people talk."

457
01-23-2011, 02:12 PM #7
(01-23-2011, 10:16 AM)tomnik Hi,

the IP has a port for a locking device on the left side (on the thicker part of the governor).
The notch which is then visible in the bore shows the IP in 15 deg ATDC.
Lock it there and install the IP when the engine is at 15 deg ATDC on the pulley.

Tom
[OT] Check your PM[/OT]

OM605 600hp diesel drag car build with BMW E30 chassis
jeemu
01-23-2011, 02:12 PM #7

(01-23-2011, 10:16 AM)tomnik Hi,

the IP has a port for a locking device on the left side (on the thicker part of the governor).
The notch which is then visible in the bore shows the IP in 15 deg ATDC.
Lock it there and install the IP when the engine is at 15 deg ATDC on the pulley.

Tom
[OT] Check your PM[/OT]


OM605 600hp diesel drag car build with BMW E30 chassis

pako
Naturally-aspirated

5
01-23-2011, 02:16 PM #8
(01-23-2011, 02:12 PM)jeemu
(01-23-2011, 10:16 AM)tomnik Hi,

the IP has a port for a locking device on the left side (on the thicker part of the governor).
The notch which is then visible in the bore shows the IP in 15 deg ATDC.
Lock it there and install the IP when the engine is at 15 deg ATDC on the pulley.

Tom
[OT] Check your PM[/OT]
Sorry
I got nothing in my PM Tongue
pako
01-23-2011, 02:16 PM #8

(01-23-2011, 02:12 PM)jeemu
(01-23-2011, 10:16 AM)tomnik Hi,

the IP has a port for a locking device on the left side (on the thicker part of the governor).
The notch which is then visible in the bore shows the IP in 15 deg ATDC.
Lock it there and install the IP when the engine is at 15 deg ATDC on the pulley.

Tom
[OT] Check your PM[/OT]
Sorry
I got nothing in my PM Tongue

Syncro_G
0-60 in 29 sec

280
01-24-2011, 01:32 AM #9
(01-23-2011, 12:58 PM)pako Thanks for the comment, do you know how they got the Pipe's for the intercooler lined up (my Intercooler is in My front bumper, It a new type bumper from 2000).

I think he did the same - 463 bumper with the ic in it.
I don't recall any plumbing issues but the IC may have already been there with the previous engine
This post was last modified: 01-24-2011, 01:33 AM by Syncro_G.

-------------
'84 G-Wagen turbodiesel
'75 240D 4-Speed

Syncro_G
01-24-2011, 01:32 AM #9

(01-23-2011, 12:58 PM)pako Thanks for the comment, do you know how they got the Pipe's for the intercooler lined up (my Intercooler is in My front bumper, It a new type bumper from 2000).

I think he did the same - 463 bumper with the ic in it.
I don't recall any plumbing issues but the IC may have already been there with the previous engine


-------------
'84 G-Wagen turbodiesel
'75 240D 4-Speed

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 3 Guest(s)
Users browsing this thread:
 3 Guest(s)