Prechamber Mod "Flame" Front
Prechamber Mod "Flame" Front
605/6 precups are off total diff sizes and shapes , but still the same concept .
they drop in the midle of head slightly ofset to exaust side , 8 X 2.25mm holes around the tipe evenly spaced and 10º ofset of each other in a 25º and 35º plane from horizontal.
neck diameter of 7mm, pre cup inside volume unknown to me, injector is bolted about 15 º from the vertical , the chamber "ball" is in the center so the injector stream should hit the ball aside. or in some cases most of the stream fails completely to hit the ball.
later on i´ll post a picture
regards