400hp w210, om606 Turbo or 320cdi?
400hp w210, om606 Turbo or 320cdi?
Just a little more detailed information about the high flow compressor wheel I mentioned above:
Exducer diameter 60mm
Trim 60
a/r of original compressor housing .61
max. pressure ratio 4.2
max. flow 0.29kg/sec
max. circumfance speed 582m/s
The max. air flow allows an approx. power of 330hp with a clean lambda of 1.2
Turbine of GT2359V is biggest common european VNT turbine, but may be a tad to small to allow 330hp, but for 300hp this would be good matching.
I found the turbo where above mentioned wheel is used, but how I experienced in the last weeks, it is very hard to come by.
If there are any news, I will keep you updated, maybe I try such wheel on my turbo before going the Twin turbo route.
Regards, Alex