Jesse's hy35 powered w116
Jesse's hy35 powered w116
Ok at this time i think it has broken rings.
I've narrowed it down to cyl 5 and I've changed the injector, precup, checked the valves. It sounds like it has plenty of compression (my tester won't clear the oil housing).
When I had the precup out I looked in and checked how high the piston comes up. It seems to be good. I'm going to get a jy motor and port the he's and do a minor build on it.
I also found out that the precups my engine has are larger than the spares I had laying around. I put a spare in and it didn't change how it ran it actually cause a fuel knock too. So I put mine back in. I also have 115 bar injectors. I swapped delivery valves and everything. Still misses and runs rough under ~2500 and out of boost. Once boost kicks in it runs perfect.
My precups are marked 617/03