STD Other Projects oel_brenner's W124

oel_brenner's W124

oel_brenner's W124

 
  • 0 Vote(s) - 0 Average
 
oel_brenner
GT2256V

146
12-20-2008, 10:16 PM #1
thought I would take a break from the SL and get the paintwork done on my W124 daily driver.
it was a lot of work, but she is painted...

http://www.coastalboatsales.com/jfraley/...24-project

re-assemble, wet sand and buff, and back to work on the W107 diesel.
This post was last modified: 01-13-2009, 11:35 AM by ForcedInduction.

cars
1991 W126 350SDL turbodiesel
1987 W124 E300D turbodiesel
1987 W126 300SDL turbodiesel
1984 W107 SL300D turbodiesel
1974 W115 /8 300D diesel

trucks
2001 Dodge RAM 3500 4x4 Cummins turbodiesel

boats
1974 Uniflite "Salty Dog" powered by
2x OM617.951 Mercedes Benz 5Cyl turbodiesels
oel_brenner
12-20-2008, 10:16 PM #1

thought I would take a break from the SL and get the paintwork done on my W124 daily driver.
it was a lot of work, but she is painted...

http://www.coastalboatsales.com/jfraley/...24-project

re-assemble, wet sand and buff, and back to work on the W107 diesel.


cars
1991 W126 350SDL turbodiesel
1987 W124 E300D turbodiesel
1987 W126 300SDL turbodiesel
1984 W107 SL300D turbodiesel
1974 W115 /8 300D diesel

trucks
2001 Dodge RAM 3500 4x4 Cummins turbodiesel

boats
1974 Uniflite "Salty Dog" powered by
2x OM617.951 Mercedes Benz 5Cyl turbodiesels

oel_brenner
GT2256V

146
12-24-2008, 09:34 AM #2
the grille


blacked out:

[Image: IMG_3044.sized.jpg]


or factory:

[Image: IMG_3046.sized.jpg]


( and ignore the unpainted trim below the headlights.. still have to paint that )

cars
1991 W126 350SDL turbodiesel
1987 W124 E300D turbodiesel
1987 W126 300SDL turbodiesel
1984 W107 SL300D turbodiesel
1974 W115 /8 300D diesel

trucks
2001 Dodge RAM 3500 4x4 Cummins turbodiesel

boats
1974 Uniflite "Salty Dog" powered by
2x OM617.951 Mercedes Benz 5Cyl turbodiesels
oel_brenner
12-24-2008, 09:34 AM #2

the grille


blacked out:

[Image: IMG_3044.sized.jpg]


or factory:

[Image: IMG_3046.sized.jpg]


( and ignore the unpainted trim below the headlights.. still have to paint that )


cars
1991 W126 350SDL turbodiesel
1987 W124 E300D turbodiesel
1987 W126 300SDL turbodiesel
1984 W107 SL300D turbodiesel
1974 W115 /8 300D diesel

trucks
2001 Dodge RAM 3500 4x4 Cummins turbodiesel

boats
1974 Uniflite "Salty Dog" powered by
2x OM617.951 Mercedes Benz 5Cyl turbodiesels

ForcedInduction
Banned

3,628
12-24-2008, 12:50 PM #3
A black car is one of the few times a blacked out grille looks good.
ForcedInduction
12-24-2008, 12:50 PM #3

A black car is one of the few times a blacked out grille looks good.

oel_brenner
GT2256V

146
12-30-2008, 08:17 PM #4
got the correct size tires up front now 245/40/18
driving and looking much better...

[Image: IMG_3276.sized.jpg]

cars
1991 W126 350SDL turbodiesel
1987 W124 E300D turbodiesel
1987 W126 300SDL turbodiesel
1984 W107 SL300D turbodiesel
1974 W115 /8 300D diesel

trucks
2001 Dodge RAM 3500 4x4 Cummins turbodiesel

boats
1974 Uniflite "Salty Dog" powered by
2x OM617.951 Mercedes Benz 5Cyl turbodiesels
oel_brenner
12-30-2008, 08:17 PM #4

got the correct size tires up front now 245/40/18
driving and looking much better...

[Image: IMG_3276.sized.jpg]


cars
1991 W126 350SDL turbodiesel
1987 W124 E300D turbodiesel
1987 W126 300SDL turbodiesel
1984 W107 SL300D turbodiesel
1974 W115 /8 300D diesel

trucks
2001 Dodge RAM 3500 4x4 Cummins turbodiesel

boats
1974 Uniflite "Salty Dog" powered by
2x OM617.951 Mercedes Benz 5Cyl turbodiesels

winmutt
bitbanger

3,468
01-04-2009, 02:51 AM #5
Jesus nice looking ride. Oddball rims, kind of Escher like, impossible yet quite real.
winmutt
01-04-2009, 02:51 AM #5

Jesus nice looking ride. Oddball rims, kind of Escher like, impossible yet quite real.

oel_brenner
GT2256V

146
01-10-2009, 04:27 PM #6
(01-04-2009, 02:51 AM)winmutt Jesus nice looking ride. Oddball rims, kind of Escher like, impossible yet quite real.

thanks.. those were the stock wheels on the CL600 '06 vintage

its the absolute largest tire on a 18" wheel possible on a W124
(well a non 500E W124)

you could not slide two business cards between the inner sidewall and the strut
and barley 1/4" on the inner fender lip

rear is about the same..very minor rubbing at full steering lock in the front
and when the back comes close to full deflection the tires slightly rub on the top of the wheel well.

cars
1991 W126 350SDL turbodiesel
1987 W124 E300D turbodiesel
1987 W126 300SDL turbodiesel
1984 W107 SL300D turbodiesel
1974 W115 /8 300D diesel

trucks
2001 Dodge RAM 3500 4x4 Cummins turbodiesel

boats
1974 Uniflite "Salty Dog" powered by
2x OM617.951 Mercedes Benz 5Cyl turbodiesels
oel_brenner
01-10-2009, 04:27 PM #6

(01-04-2009, 02:51 AM)winmutt Jesus nice looking ride. Oddball rims, kind of Escher like, impossible yet quite real.

thanks.. those were the stock wheels on the CL600 '06 vintage

its the absolute largest tire on a 18" wheel possible on a W124
(well a non 500E W124)

you could not slide two business cards between the inner sidewall and the strut
and barley 1/4" on the inner fender lip

rear is about the same..very minor rubbing at full steering lock in the front
and when the back comes close to full deflection the tires slightly rub on the top of the wheel well.


cars
1991 W126 350SDL turbodiesel
1987 W124 E300D turbodiesel
1987 W126 300SDL turbodiesel
1984 W107 SL300D turbodiesel
1974 W115 /8 300D diesel

trucks
2001 Dodge RAM 3500 4x4 Cummins turbodiesel

boats
1974 Uniflite "Salty Dog" powered by
2x OM617.951 Mercedes Benz 5Cyl turbodiesels

Lincolnlock
TA 0301

69
01-13-2009, 11:02 AM #7
I like the blacked out grill. It looks mean. It sounds like your getting super close to the fenders. I bought a fender rolling tool to fit the 275's on my w123. They were really close and I though I could get away with just putting them on. However, in a drift, the tires would rub like crazy!

http://fenderrollers.com/?gclid=COWZpODw...swodiFOGDQ
Lincolnlock
01-13-2009, 11:02 AM #7

I like the blacked out grill. It looks mean. It sounds like your getting super close to the fenders. I bought a fender rolling tool to fit the 275's on my w123. They were really close and I though I could get away with just putting them on. However, in a drift, the tires would rub like crazy!

http://fenderrollers.com/?gclid=COWZpODw...swodiFOGDQ

winmutt
bitbanger

3,468
01-13-2009, 01:23 PM #8
(01-13-2009, 11:02 AM)Lincolnlock I like the blacked out grill. It looks mean. It sounds like your getting super close to the fenders. I bought a fender rolling tool to fit the 275's on my w123. They were really close and I though I could get away with just putting them on. However, in a drift, the tires would rub like crazy!

http://fenderrollers.com/?gclid=COWZpODw...swodiFOGDQ

Ooof thats not cheap. Have you not heard of the baseball bat and heat gun trick?
winmutt
01-13-2009, 01:23 PM #8

(01-13-2009, 11:02 AM)Lincolnlock I like the blacked out grill. It looks mean. It sounds like your getting super close to the fenders. I bought a fender rolling tool to fit the 275's on my w123. They were really close and I though I could get away with just putting them on. However, in a drift, the tires would rub like crazy!

http://fenderrollers.com/?gclid=COWZpODw...swodiFOGDQ

Ooof thats not cheap. Have you not heard of the baseball bat and heat gun trick?

Lincolnlock
TA 0301

69
01-13-2009, 02:21 PM #9
Yes, I've heard of it. I've even done it several times. I think there is a cheaper harbor frieght one avalible. After all that work I'm not sure if I could use a baseball bat to do it. Big Grin
Lincolnlock
01-13-2009, 02:21 PM #9

Yes, I've heard of it. I've even done it several times. I think there is a cheaper harbor frieght one avalible. After all that work I'm not sure if I could use a baseball bat to do it. Big Grin

winmutt
bitbanger

3,468
01-13-2009, 09:02 PM #10
(01-13-2009, 02:21 PM)Lincolnlock Yes, I've heard of it. I've even done it several times. I think there is a cheaper harbor frieght one avalible. After all that work I'm not sure if I could use a baseball bat to do it. Big Grin

Shhh I used a blow dryer and 2x4 Big Grin

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
01-13-2009, 09:02 PM #10

(01-13-2009, 02:21 PM)Lincolnlock Yes, I've heard of it. I've even done it several times. I think there is a cheaper harbor frieght one avalible. After all that work I'm not sure if I could use a baseball bat to do it. Big Grin

Shhh I used a blow dryer and 2x4 Big Grin


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

Lincolnlock
TA 0301

69
01-16-2009, 09:58 PM #11
(01-13-2009, 09:02 PM)winmutt
(01-13-2009, 02:21 PM)Lincolnlock Yes, I've heard of it. I've even done it several times. I think there is a cheaper harbor frieght one avalible. After all that work I'm not sure if I could use a baseball bat to do it. Big Grin

Shhh I used a blow dryer and 2x4 Big Grin

That's awesome. Big Grin
Lincolnlock
01-16-2009, 09:58 PM #11

(01-13-2009, 09:02 PM)winmutt
(01-13-2009, 02:21 PM)Lincolnlock Yes, I've heard of it. I've even done it several times. I think there is a cheaper harbor frieght one avalible. After all that work I'm not sure if I could use a baseball bat to do it. Big Grin

Shhh I used a blow dryer and 2x4 Big Grin

That's awesome. Big Grin

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)