Turbo 616 powered Astro Van build
Turbo 616 powered Astro Van build
(01-29-2014, 01:52 PM)Simpler=Better Alternatively, hold a marker up to the flywheel as it's loping around. The outermost flung area will hit the marker.
EDIT: setup a camera when you're doing this just in case. That way your wife knows what happened when she finds your body.
(01-29-2014, 02:07 PM)willbhere4u 1st check the balance on the original 617 flywheel it may be neutral balance I have read that a 240d 616 flywheel Evan balanced and matched will vibrated on a 617 because it dose not have enough mass for the 617 engine. The 300d manual flywheels are massive and very heavy over 50# loaded I believe. On a diesel the heaver the flywheel the better for vibrations concerns!
(01-29-2014, 10:46 PM)Austincarnut try and figure the heavy spot and counter with stick on lead wheel weights (if there is space) and then adjust by removing material
(01-29-2014, 01:52 PM)Simpler=Better Alternatively, hold a marker up to the flywheel as it's loping around. The outermost flung area will hit the marker.
EDIT: setup a camera when you're doing this just in case. That way your wife knows what happened when she finds your body.
(01-29-2014, 02:07 PM)willbhere4u 1st check the balance on the original 617 flywheel it may be neutral balance I have read that a 240d 616 flywheel Evan balanced and matched will vibrated on a 617 because it dose not have enough mass for the 617 engine. The 300d manual flywheels are massive and very heavy over 50# loaded I believe. On a diesel the heaver the flywheel the better for vibrations concerns!
(01-29-2014, 10:46 PM)Austincarnut try and figure the heavy spot and counter with stick on lead wheel weights (if there is space) and then adjust by removing material