Turbo 616 powered Astro Van build
Turbo 616 powered Astro Van build
So worked out some new motor mounts-
Here is the eventual shape I wanted to go with, the two ears would make the tabs of the mount accessible, and the open pipe would make the inside socket accessible as well from underneath on the inside face
passenger side-
driver side, shows more of the idea on usability (this one is also removable, I welded it to the spacer on the subframe)-
Passenger side welded in and finished- (I was worried about this, as its going to make it difficult to remove the upper control arm if I need to for any reason. I almost bailed on the stock arm, but then remembered that the control arm bolts are splined and can be driven out, so it would still be removable, just more of a PITA)
driver side-
This is the back side accessibility for the inner socket head screw, you can get a ratchet in there and do about 3 clicks at a time
Ready to be bolted back to the body