Turbo 616 powered Astro Van build
Turbo 616 powered Astro Van build
anyone recommend some gauges they have gotten good service from?
Im familiar with Isspro at the high end, installed a bunch of those and was heading that route, except for the $$$$$ price tag on Isspro gauges making it a long time before I can afford to buy all these below- Also, my opinion on Isspro is its a high quality product, but some of their gauges are WAY too complex for what they need to do.
Anyone have opinions on autometer?
what I need-
1-Speedo -Electronic self calibrating-
2- EGT -250-1650F-
3- Boost -0-15psi-
4- Oil Pressure -0-100psi-
5- Voltage
6- Fuel Level 0-90 ohms
7- Engine Temp- 100-250F
and im going to need an aftermarket dimmer switch as well
I priced it out buying all VDO gauges, and keeping the three crappy sunpro gauges I have installed for oil pressure, voltage, and temp, and im looking at about 500 bucks in gauges to do all VDO. The most expensive ones are EGT and the electronic speedo (with included digital odometer).
Also, has anyone installed one of these interesting self calibrating electronic speedos? How reliable are they? Sounds like an ideal solution, all I have to do is wire up the gauge to the hall effect sensor in the transmission, drive an exact measured 2 miles for calibration, and it will compensate for tire size, rear end, ect and work properly according to the sales literature