Turbo 616 powered Astro Van build
Turbo 616 powered Astro Van build
here is the new master and pedal assembly-
a floor mounted wildwood setup, with a big 3/4 bore master
This thing is designed to bolt flat to a floor, and some modification had to be done to allow such a mounting on the van floor. Fortunately with the body lift I had some room to do the below-
First I cut out where it was going to sit-
Then I made this recessed plate, unfinished here, but you get the idea, hole will be drilled in the back for the master bore, and holes around the flange-
on the back side should be plenty of room for the new master, and I may be able to simply bend the existing line around and connect. The wildwood setup comes with 2 different reservoirs, and remote or on master mounting for them. Its a pretty nice kit with a lot of options
On the inside the pedal will sit at rest just about where the other pedals are-
Im way happier with this arrangement (once its done) than with the stock pedal. this has a lot of adjustment built in, and if it still doesn't get into gear, I know its not an issue with pedal throw. Also its considerably easier to get to vs struggling under the dash