Turbo 616 powered Astro Van build
Turbo 616 powered Astro Van build
todays update-
The underside of the fuel tank was crispy, but not terrible, with the exception of one area where it was pretty rusty, but not through fortunately
refinished ready for installation. Glad I went through with this, I doubt this tank had another winter before it rusted through, especially on the top-
bottom-
top with plastic shield installed-
oil system all hooked up with the exception of the turbo feed line, though I did have the opportunity today to get that made, so I should hopefully get things put together this weekend for the turbo side.
cooler-
lines run by the fuel filter, and you can see here my shut off valve for fuel on the inlet side of the filter-
moroso head. I can't say enough about how nice this oil filter head is, you can see here the small port on the top ill be using for turbo feed, and the port in the middle front will eventually be for my oil pressure gauge.
The way I have this plumbed flow wise is engine, cooler, filter, back to engine. The reason is just in case any crap in the cooler gets dumped downstream, the filter will pick it up before it gets to the motor