IP Full Load Adjustment Procedure for the MW and M pumps
IP Full Load Adjustment Procedure for the MW and M pumps
New adjustment totals (These will not work on the OM60x):
Idle, Fine- N/A (Lost track trying to fix the idle)
Idle, Coarse- 5-1/4 CCW
Idle stabilizer (2K)- 2 CCW
Full Load- 5 CCW
Max RPM- 1/4 CW
Torque Control- 1 CW
I adjusted the Idle stabilizer (2K) 2 turns CCW. The idle now stays at a steady 650rpm but its still extremely slow to return to idle when revved.
I need to get rid of this 3.46 diff, my speed maxes out too quick.