IP Full Load Adjustment Procedure for the MW and M pumps
IP Full Load Adjustment Procedure for the MW and M pumps
Okay, my 603 is my daily driver at the moment... Fitted a hx35w and 7mm plunjers. I need some adjustment advice I wanna do in the weekend.
What I already did:
2turns ccw on the full load (bottom left) screw and
2turns on the idle stabilizer(?) (top right) screw.
Smoke is quite heavy on no boost. But there's no Alda on my pump yet.
It's a European 603 so it would be possible to turn the full load screw 5 turns ccw and the same for the idle stabilizer? I need some good idle.
The reason I want more fuel, at approx 0.5 bar pressure the smoke is gone. I am currently pushing 1.5 bar pressure. So I recon is needs some fuel.