IP Full Load Adjustment Procedure for the MW and M pumps
IP Full Load Adjustment Procedure for the MW and M pumps
Originally I adjusted the WG to 10-11 psi, but after a couple of days, it returned to 8 like previously. I now have a, "manual boost controller," if you can call it that. It won't boost over 5 at the top of the rpm range. The boost is acting identically to my alltrac when the WG stuck open. I'll probably re-check the ALDA and lines to it, but they were cleaned not that long ago. I have a gt2259 sitting in my basement, so I might work on setting that up soon too.