IP Full Load Adjustment Procedure for the MW and M pumps
IP Full Load Adjustment Procedure for the MW and M pumps
that's right.
But when they use n/a Ms just because the do not have alternatives for the after market 7mm elements and come up with funny quantities it's hard to believe that they touch the cam.
I would be open to have them do an IP with the M75 but no response.
And among us technical guys, the quality of the 7 mm after market kills all the good things they do. Grinding the cam down by >2mm ?? and what happens with the fuel supply bore in this case? Pre lift?
Maybe I am already too deep in this stuff to believe all that is written.
Anyway let's wait for the US results.
Tom