Hub Centric wheel spacers, where to buy?
Hub Centric wheel spacers, where to buy?
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
Id like to get a set of actual hub centric 5mm spacers and retire the random spacers Ive used in the past. Can anyone recommend a good place to get wheel spacers? This would be for a 123 chassis, and also maybe a 115 chassis
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
Get me a full set of dimensions and what material you want them in, pay cost of material, and a small bit for time, and I can get you a set.
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
John 3:16; John 14:6
'83 300CD 115,XXX miles lowered
'06 Dodge 3500 Cummins modded
'82 Yamaha 465 Enduro Street Legal
![[Image: IMG_1047.jpg]](http://i227.photobucket.com/albums/dd255/JoeReitman/IMG_1047.jpg)
Joe Reitman
09-10-2011, 01:20 PM #3are you still making spacers? thanks
John 3:16; John 14:6
'83 300CD 115,XXX miles lowered
'06 Dodge 3500 Cummins modded
'82 Yamaha 465 Enduro Street Legal
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
09-11-2011, 08:18 AM #4Ichiba makes good hub centric spacers. But to be honest I got a set off of ebay and they were pretty well manufactured. Good metal grade 8 bolts etc.
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
John 3:16; John 14:6
'83 300CD 115,XXX miles lowered
'06 Dodge 3500 Cummins modded
'82 Yamaha 465 Enduro Street Legal
Joe Reitman
09-12-2011, 05:07 PM #5Thanks. Recall the ebAy seller?
John 3:16; John 14:6
'83 300CD 115,XXX miles lowered
'06 Dodge 3500 Cummins modded
'82 Yamaha 465 Enduro Street Legal
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
09-12-2011, 05:43 PM #6yea actually it was optionselects im not 100% sure its grade 8 for the bolts but im sure you could put some in if you really wanted to. but they worked well for me.
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
John 3:16; John 14:6
'83 300CD 115,XXX miles lowered
'06 Dodge 3500 Cummins modded
'82 Yamaha 465 Enduro Street Legal
Joe Reitman
09-12-2011, 09:26 PM #7Thanks
John 3:16; John 14:6
'83 300CD 115,XXX miles lowered
'06 Dodge 3500 Cummins modded
'82 Yamaha 465 Enduro Street Legal
I got 15mm spacers off of craigslist from a guy local for $20-25 each I think and they work great in the rear. The fronts I went the way of "adding ET" like another member and put washers with longer bolts on the steering arms to space it in towards the middle of the car so that way you have room for the wheels.
'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
The front spacers might be an issue... just beware when you buy some that the ID must be correct or they wont slide in all the way.
I got 15mm spacers off of craigslist from a guy local for $20-25 each I think and they work great in the rear. The fronts I went the way of "adding ET" like another member and put washers with longer bolts on the steering arms to space it in towards the middle of the car so that way you have room for the wheels.
'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
09-13-2011, 04:29 PM #9also. make sure that there is space for the lugnuts to stick out. other wise youll be in for a unhappy ending.
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
want 25 mm or so spacers for them to bring tire closer to fender.
Fronts should be just right after i get them back from machine shop - they are opening up the outside edge of hub section of rim to 63.1 mm. the long/deep front hub ended up being an advantage in order to make these particular konig wheels hub centric.
the brake rotor and hub assembly is of course 66.6 mm right at the surface where wheel mates to hub- but it tapers down to 63.1 as you move out toward the dust cap. so the 63.1 mm area will make the wheels hub centric. hope this makes sense...
bottom line i still need the spacers in back, and longer studs unless i get the type spacer that bolts to hub and has separate studs for wheel
John 3:16; John 14:6
'83 300CD 115,XXX miles lowered
'06 Dodge 3500 Cummins modded
'82 Yamaha 465 Enduro Street Legal
Joe Reitman
09-14-2011, 08:59 AM #10thanks- fronts should be just right since rears went on with tire sidewall of new 215/45-17 tires at same distance from fenderwell as 205/50-14 were.
want 25 mm or so spacers for them to bring tire closer to fender.
Fronts should be just right after i get them back from machine shop - they are opening up the outside edge of hub section of rim to 63.1 mm. the long/deep front hub ended up being an advantage in order to make these particular konig wheels hub centric.
the brake rotor and hub assembly is of course 66.6 mm right at the surface where wheel mates to hub- but it tapers down to 63.1 as you move out toward the dust cap. so the 63.1 mm area will make the wheels hub centric. hope this makes sense...
bottom line i still need the spacers in back, and longer studs unless i get the type spacer that bolts to hub and has separate studs for wheel
John 3:16; John 14:6
'83 300CD 115,XXX miles lowered
'06 Dodge 3500 Cummins modded
'82 Yamaha 465 Enduro Street Legal
2 Guest(s)
2 Guest(s)