W210/OM606.962 EGR Delete
W210/OM606.962 EGR Delete
(09-17-2011, 10:16 AM)kotka Good thread for me - I have P1404 error. It is definitely not a transducer issue - I changed it - no difference.The 606.964 (the version of the 606 in the G-class) doesn't have a MAF. It has an EGR lift sensor. The circuit shown in this thread won't work for that motor. I designed a circuit that removes the lift sensor (and the vacuum modulator) from the ECU, but is isn't very simple. Reply to this thread it you are interested in it.
I connected 5v power pin of the maf plug with com pin of the plug-error changed to p1401 - maf sensor.
Ah-forget to mention that my g-wagon (606.964) goes into limp mode after few minutes. So I try to make ecu live without maf and erg )) I physically blocked erg pipe already as local ecological standards allow even more severe emission wise cars to drive
Any recommendations? My maf plug is 3 pin one-power, "-" and com pins
(09-17-2011, 10:16 AM)kotka Good thread for me - I have P1404 error. It is definitely not a transducer issue - I changed it - no difference.The 606.964 (the version of the 606 in the G-class) doesn't have a MAF. It has an EGR lift sensor. The circuit shown in this thread won't work for that motor. I designed a circuit that removes the lift sensor (and the vacuum modulator) from the ECU, but is isn't very simple. Reply to this thread it you are interested in it.
I connected 5v power pin of the maf plug with com pin of the plug-error changed to p1401 - maf sensor.
Ah-forget to mention that my g-wagon (606.964) goes into limp mode after few minutes. So I try to make ecu live without maf and erg )) I physically blocked erg pipe already as local ecological standards allow even more severe emission wise cars to drive
Any recommendations? My maf plug is 3 pin one-power, "-" and com pins