Thread Rating:
  • 3 Vote(s) - 3.67 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OM Exhaust Manifold Thread
Sultzi Offline
GT2256V
***


Posts: 102
Joined: Dec 2015
Location: Finland
RE: OM Exhaust Manifold Thread
Good as always, are you happy how they came together? Smile

And for reverence manifolds that Pyry made for me (as seen on the project page too)
[Image: _medium.jpg]
[Image: _medium.jpg]
[Image: _medium.jpg]
(This post was last modified: 08-29-2016, 03:36 AM by Sultzi.)
08-29-2016, 03:33 AM
Find Reply
atypicalguy Offline
Holset
****


Posts: 514
Joined: Oct 2013
Location: LA
RE: OM Exhaust Manifold Thread
(05-16-2014, 12:55 PM)raysorenson Wrote: That corsa thing is insanely expensive. That's pricing from ten years ago. Check out 14point7's $200 idash.  Makes the corsa look obsolete. http://www.14point7.com/products/idash

Have you actually used that 14point7 setup Ray? I was thinking of a D200. I like the idea of the 14.7 interface to a tablet, but I'm not sure about the sensor quality etc and how it all goes together. Are the connections water resistant? Does it need its own waterproof enclosure? Does it mount under the dash, or in the engine compartment with a wireless link? Etc.  The 14.7 boost sensor looks junky to me. And only goes to 40psi.




thanks,
atypicalguy
08-29-2016, 07:46 AM
Find Reply
atypicalguy Offline
Holset
****


Posts: 514
Joined: Oct 2013
Location: LA
RE: OM Exhaust Manifold Thread
Kind of tight, but should fit.


Attached Files Image(s)
   
09-05-2016, 06:38 AM
Find Reply
swecias Offline
HX40Super
*


Posts: 40
Joined: Feb 2012
Location: LT
RE: OM Exhaust Manifold Thread
here is my exaust manifold


Attached Files Image(s)
   
09-28-2016, 02:35 PM
Find Reply
Hario' Offline
C300TD Wagon (W202)
*****


Posts: 896
Joined: Nov 2011
Location: SW London
RE: OM Exhaust Manifold Thread
My rat look manifold..

[Image: 20160926_200912.jpg]



Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]
09-30-2016, 04:29 AM
Find Reply
atypicalguy Offline
Holset
****


Posts: 514
Joined: Oct 2013
Location: LA
Photo  RE: OM Exhaust Manifold Thread
Bits and pieces from @PTRacing


Attached Files Image(s)
   
10-02-2016, 04:12 AM
Find Reply
Sultzi Offline
GT2256V
***


Posts: 102
Joined: Dec 2015
Location: Finland
RE: OM Exhaust Manifold Thread
Very nice, will be nice to know how the setup is going to work! Smile
10-02-2016, 10:21 AM
Find Reply
atypicalguy Offline
Holset
****


Posts: 514
Joined: Oct 2013
Location: LA
RE: OM Exhaust Manifold Thread
I agree. Hoping for the best. It will be more sequential at higher rpm.Is your setup running yet?
10-02-2016, 09:36 PM
Find Reply
Sultzi Offline
GT2256V
***


Posts: 102
Joined: Dec 2015
Location: Finland
RE: OM Exhaust Manifold Thread
Yes it's, look at from the projects side. There is info about the turbos and dyno graph..
10-03-2016, 11:43 AM
Find Reply
Greazzer Offline
Superturbo
*****


Posts: 1,247
Joined: Jan 2011
Location: South Carolina
RE: OM Exhaust Manifold Thread
DV posted a snappy or two of the W115 Turbo Exhaust manifold which has a six (6) threaded stud attaching point.  Those manifolds are pretty rare -- but they are around.  What is truly rare is the piece which mates to the six (6) threaded studs to the T4 turbo.  Here are some snappies of one which I just picked up.  NO part number which is odd.  This is clearly a part made in a factory and not a backyard deal.  (If it was a backyard deal, incredible work !)


Attached Files Image(s)
               
Seventh Year Anniversary with STD on 1-9-2018

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
12-06-2018, 01:31 PM
Find Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)