STD Other FS / WTB / Buying guides WTB: OM617 Turbo Pre-Chambers!!

WTB: OM617 Turbo Pre-Chambers!!

WTB: OM617 Turbo Pre-Chambers!!

 
  • 0 Vote(s) - 0 Average
 
GREASY_BEAST
Holset

411
08-13-2010, 12:39 PM #1
I need at least 3 good used prechambers shipped to central VT by next tuesday or wednesday. Since they cost so damn much new, I'm willing to pay someone who has access to a parts car or yard to get this done quick. Thanks.
GREASY_BEAST
08-13-2010, 12:39 PM #1

I need at least 3 good used prechambers shipped to central VT by next tuesday or wednesday. Since they cost so damn much new, I'm willing to pay someone who has access to a parts car or yard to get this done quick. Thanks.

GREASY_BEAST
Holset

411
08-13-2010, 03:10 PM #2
Anyone got any?
GREASY_BEAST
08-13-2010, 03:10 PM #2

Anyone got any?

willbhere4u
Six in a row make her go!

2,507
08-13-2010, 03:52 PM #3
I've got a head and a dud engine but no Pre-chamber tool I'm in CO not to far from forced! I'd be glad to donate some to you if I had a way to get them out!

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
08-13-2010, 03:52 PM #3

I've got a head and a dud engine but no Pre-chamber tool I'm in CO not to far from forced! I'd be glad to donate some to you if I had a way to get them out!


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

GREASY_BEAST
Holset

411
08-13-2010, 03:56 PM #4
(08-13-2010, 03:52 PM)willbhere4u I've got a head and a dud engine but no Pre-chamber tool I'm in CO not to far from forced! I'd be glad to donate some to you if I had a way to get them out!

No need to donate, everything has a price. I'm making a pre-chamber tool right now from a bike crank remover, but I don't think I can get it out to you in time to make this work... (trying to beat $240+shipping and get them here by weds afternoon or thursday)
GREASY_BEAST
08-13-2010, 03:56 PM #4

(08-13-2010, 03:52 PM)willbhere4u I've got a head and a dud engine but no Pre-chamber tool I'm in CO not to far from forced! I'd be glad to donate some to you if I had a way to get them out!

No need to donate, everything has a price. I'm making a pre-chamber tool right now from a bike crank remover, but I don't think I can get it out to you in time to make this work... (trying to beat $240+shipping and get them here by weds afternoon or thursday)

willbhere4u
Six in a row make her go!

2,507
08-13-2010, 04:50 PM #5
If I can get them out I'll let you know!

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
08-13-2010, 04:50 PM #5

If I can get them out I'll let you know!


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

ForcedInduction
Banned

3,628
08-13-2010, 06:41 PM #6
I've got a puller built, but I need a collar socket. There is a 300SD in the yards I could pull them from.
ForcedInduction
08-13-2010, 06:41 PM #6

I've got a puller built, but I need a collar socket. There is a 300SD in the yards I could pull them from.

DeliveryValve
Superturbo

1,338
08-14-2010, 03:03 AM #7
At my local yard, there's a 116,000 mile 617 that was run dry. I can pull the prechambers off, but I can only get there by mid-week the earliest (slight chance sooner).

Let me know if you still need them by then and I'll pull them for you.



.

Gota love Mercedes Diesels!



.
DeliveryValve
08-14-2010, 03:03 AM #7

At my local yard, there's a 116,000 mile 617 that was run dry. I can pull the prechambers off, but I can only get there by mid-week the earliest (slight chance sooner).

Let me know if you still need them by then and I'll pull them for you.



.


Gota love Mercedes Diesels!



.

GREASY_BEAST
Holset

411
08-14-2010, 07:30 AM #8
ForcedInduction I've got a puller built, but I need a collar socket. There is a 300SD in the yards I could pull them from.

Thanks Forced. I was going to try to make a collar socket using some standard socket, although 130ft*lbs is quite a lot to ask of those two little ears. Again, I doubt I could get it out to you in time to make this work... Thanks for the offer though.

(08-14-2010, 03:03 AM)DeliveryValve At my local yard, there's a 116,000 mile 617 that was run dry. I can pull the prechambers off, but I can only get there by mid-week the earliest (slight chance sooner).

Let me know if you still need them by then and I'll pull them for you.

Thanks for the offer, but that's cutting it a bit close. I really need them by Wednesday.
This post was last modified: 08-14-2010, 07:35 AM by GREASY_BEAST.
GREASY_BEAST
08-14-2010, 07:30 AM #8

ForcedInduction I've got a puller built, but I need a collar socket. There is a 300SD in the yards I could pull them from.

Thanks Forced. I was going to try to make a collar socket using some standard socket, although 130ft*lbs is quite a lot to ask of those two little ears. Again, I doubt I could get it out to you in time to make this work... Thanks for the offer though.

(08-14-2010, 03:03 AM)DeliveryValve At my local yard, there's a 116,000 mile 617 that was run dry. I can pull the prechambers off, but I can only get there by mid-week the earliest (slight chance sooner).

Let me know if you still need them by then and I'll pull them for you.

Thanks for the offer, but that's cutting it a bit close. I really need them by Wednesday.

GREASY_BEAST
Holset

411
08-16-2010, 10:13 AM #9
If nobody has any on hand I'll have to order new ones today... LMK by 3PM EST either in this thread or via PM.
GREASY_BEAST
08-16-2010, 10:13 AM #9

If nobody has any on hand I'll have to order new ones today... LMK by 3PM EST either in this thread or via PM.

totaldisaster
lightly modded OM606

211
08-19-2010, 10:39 AM #10
I have a few lying around.

pm me if you are still looking. Just one?
totaldisaster
08-19-2010, 10:39 AM #10

I have a few lying around.

pm me if you are still looking. Just one?

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 3 Guest(s)
Users browsing this thread:
 3 Guest(s)