Holset HX35 Install info on om603

muuris

OM605

318

08-24-2010, 08:38 AM #97

(08-24-2010, 07:08 AM)ForcedInduction Thats the way it is when people post wrong things. If somebody doesn't come forward to say "you're wrong" then it will continue to be conveyed as "right" information.

(08-24-2010, 07:08 AM)ForcedInduction Instead of flat out saying "An HY35 won't work" say why it won't work for that particular application, keeping in mind that your "experience" probably won't fit exactly to their needs/desires.

My point exactly. Why won't you act like it youself! Stop saying "you're wrong" without any explanations. You are the one who has been mostly wrong in this thread and have mislead people the most!

(08-19-2010, 02:12 PM)ForcedInduction
(08-19-2010, 09:04 AM)muuris Forced is lacking practical experience on this subject.
Wrong.

So you should have experience with OM60x. Which you don't. So I'm RIGHT. It's better to have some experience, even if it wouldn't fit 100% to other's needs, than none.

(08-16-2010, 03:19 PM)ForcedInduction Finns threw a big turbo and a lot of fuel at small engines, but everyone else is figuring out how to do better.

You are doing better by putting a VNT turbo in a 1970s diesel? You have seen just some cars at some random videos. The secrects of the most advanced builds are kept in the garage (not referring to me or jeemu) and are not shouted in the Net.

(08-19-2010, 02:12 PM)ForcedInduction Wrong again. Only the common rail models have dynamic control of timing. The P7100 and VP44 injection systems are no better or worse than what we use and they're very popular in the 1000+hp group.

Now you're wrong again. Find out how the VP44 timing system works, it is lightyears ahead of the Merc system.

(08-20-2010, 04:42 PM)ForcedInduction Sounds like the pressure is affecting the old hardened stem seals and they're binding or allowing liquid oil to get through.

You're wrong! That would explain smoking, but how would it explain the engine to lose power, to stall, to shake etc. And just by a miracle, the old seals would fix themselves every time in less than half a minute and work alright until next backpressure peak.

(08-22-2010, 03:35 PM)ForcedInduction
(08-22-2010, 03:28 PM)jonbobshinigin Should I run internal or external wastegate?
No difference. They both work exactly the same.

Isn't this misleading people? Internal wastegates don't work with high hp! You're wrong!

(08-24-2010, 07:08 AM)ForcedInduction Then stop being a hypocrite.

Now who might be the worst in these forums..

Finally, I found this particularly amusing:

(08-24-2010, 07:08 AM)ForcedInduction Such places lack whats known as "balls". People too sensitive to take criticism constructively. Such people are blinded by change and believe they see "fuck you" instead of "you're wrong".

Aren't you too sensitive? You just ban everyone who criticises you. Or change other's words in your quotes.

Could we start a new thread Forced vs the rest of the world Big Grin

But seriously, could we continue this offtopic somewhere else.

This post was last modified: 08-24-2010, 08:42 AM by muuris.