Holset HX35 Install info on om603
Holset HX35 Install info on om603
08-20-2010, 03:01 PM
#60
(08-20-2010, 01:30 PM)jeemu Its very dificult to say exactly what turbo you need.
It depends on what everyone wants. Some think turbo spools fast, others think it does not.
But if you need 350hp, you need hx35 size turbo, but not apple size turbine housing.
Turbo spool depends on other things than just the turbo.
My friend has same turbo on his 606 engine as I do on 605.
His injection pump is made different company than mine and on his engine that same turbo spools much slower.
Of course you can put hy35 on it. I have tested that and so many more here.
Not good experience for myself.
High back pressure doesn't do any good on these multivalve engines.
Engine totally dies. You guys can call me stupid, but I have paid money to learn big time.
It would be nice when someone hits facts on the table he has little experience about these engines.
I think this is where disagreements may start--
Its the percieved Expectation of what is 'good' spooling and 'slow' spooling
--Like asking someone --do you like tea or coffee!--we all have our own tastes, and what we want out of the modification at the end....
--I'm gonna go with the general concensus and get HX35, 12cm housing 60mm turbine, and 'super-trim' compressor 54mm--This seems the 'accepted' compromise between 'spooling' and back-pressure arguements for the OM.606.
(Looks like I may have new job, large Co is taking over the plant I designed and built, so hopefully I'll get my old job back, and I can buy the trans, turbo, manifold, pump-elements etc--Still haven't tracked down any 300SE engine-mounts though!)
I'm thinking this turbo would work out reasonably for the O/P 603 as well....
This post was last modified: 08-20-2010, 03:10 PM by Alastair E.
![[Image: 300TDnoplate.jpg]](http://i190.photobucket.com/albums/z128/alastairhcii/300TDnoplate.jpg)
Alastair E
08-20-2010, 03:01 PM #60(08-20-2010, 01:30 PM)jeemu Its very dificult to say exactly what turbo you need.
It depends on what everyone wants. Some think turbo spools fast, others think it does not.
But if you need 350hp, you need hx35 size turbo, but not apple size turbine housing.
Turbo spool depends on other things than just the turbo.
My friend has same turbo on his 606 engine as I do on 605.
His injection pump is made different company than mine and on his engine that same turbo spools much slower.
Of course you can put hy35 on it. I have tested that and so many more here.
Not good experience for myself.
High back pressure doesn't do any good on these multivalve engines.
Engine totally dies. You guys can call me stupid, but I have paid money to learn big time.
It would be nice when someone hits facts on the table he has little experience about these engines.
I think this is where disagreements may start--
Its the percieved Expectation of what is 'good' spooling and 'slow' spooling
--Like asking someone --do you like tea or coffee!--we all have our own tastes, and what we want out of the modification at the end....
--I'm gonna go with the general concensus and get HX35, 12cm housing 60mm turbine, and 'super-trim' compressor 54mm--This seems the 'accepted' compromise between 'spooling' and back-pressure arguements for the OM.606.
(Looks like I may have new job, large Co is taking over the plant I designed and built, so hopefully I'll get my old job back, and I can buy the trans, turbo, manifold, pump-elements etc--Still haven't tracked down any 300SE engine-mounts though!)
I'm thinking this turbo would work out reasonably for the O/P 603 as well....
Messages In This Thread
Holset HX35 Install info on om603 - by jonbobshinigin - 08-10-2010, 11:48 AM
RE: Holset HY35 Install info on om603 - by muuris - 08-10-2010, 12:55 PM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-10-2010, 05:29 PM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-10-2010, 01:26 PM
RE: Holset HY35 Install info on om603 - by muuris - 08-11-2010, 01:21 PM
RE: Holset HY35 Install info on om603 - by jeemu - 08-11-2010, 01:58 PM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-11-2010, 02:10 PM
RE: Holset HY35 Install info on om603 - by muuris - 08-12-2010, 01:21 PM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-12-2010, 01:52 PM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-16-2010, 01:01 AM
RE: Holset HY35 Install info on om603 - by jeemu - 08-16-2010, 05:31 AM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-16-2010, 06:45 AM
RE: Holset HY35 Install info on om603 - by 95e300dez - 08-16-2010, 10:10 AM
RE: Holset HY35 Install info on om603 - by gsxr - 08-16-2010, 01:41 PM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-16-2010, 02:28 PM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-16-2010, 03:19 PM
RE: Holset HY35 Install info on om603 - by jeemu - 08-18-2010, 02:05 PM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-18-2010, 04:04 PM
RE: Holset HY35 Install info on om603 - by 95e300dez - 08-18-2010, 04:44 PM
RE: Holset HY35 Install info on om603 - by jeemu - 08-18-2010, 04:53 PM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-18-2010, 05:03 PM
RE: Holset HY35 Install info on om603 - by jeemu - 08-18-2010, 05:21 PM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-16-2010, 04:03 PM
RE: Holset HY35 Install info on om603 - by winmutt - 08-16-2010, 05:54 PM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-16-2010, 06:02 PM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-16-2010, 06:05 PM
RE: Holset HY35 Install info on om603 - by willbhere4u - 08-16-2010, 08:59 PM
RE: Holset HY35 Install info on om603 - by gsxr - 08-17-2010, 09:58 AM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-17-2010, 10:17 AM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-17-2010, 06:12 PM
RE: Holset HY35 Install info on om603 - by gsxr - 08-17-2010, 07:00 PM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-17-2010, 07:04 PM
RE: Holset HY35 Install info on om603 - by gsxr - 08-17-2010, 07:17 PM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-17-2010, 07:28 PM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-18-2010, 02:19 PM
RE: Holset HY35 Install info on om603 - by 95e300dez - 08-18-2010, 03:01 PM
RE: Holset HY35 Install info on om603 - by jeemu - 08-18-2010, 03:13 PM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-18-2010, 05:28 PM
RE: Holset HY35 Install info on om603 - by jeemu - 08-18-2010, 05:30 PM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-19-2010, 06:56 AM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-18-2010, 09:51 PM
RE: Holset HY35 Install info on om603 - by MJF - 08-18-2010, 10:27 PM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-18-2010, 10:47 PM
RE: Holset HY35 Install info on om603 - by muuris - 08-19-2010, 09:04 AM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-19-2010, 02:12 PM
RE: Holset HY35 Install info on om603 - by HughF_UK - 08-19-2010, 10:03 AM
RE: Holset HY35 Install info on om603 - by muuris - 08-19-2010, 12:20 PM
RE: Holset HY35 Install info on om603 - by jeemu - 08-19-2010, 05:15 PM
RE: Holset HY35 Install info on om603 - by gsxr - 08-19-2010, 05:29 PM
RE: Holset HY35 Install info on om603 - by 95e300dez - 08-19-2010, 06:55 PM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-19-2010, 09:12 PM
RE: Holset HY35 Install info on om603 - by winmutt - 08-20-2010, 05:40 AM
RE: Holset HY35 Install info on om603 - by 95e300dez - 08-19-2010, 10:52 PM
RE: Holset HY35 Install info on om603 - by muuris - 08-19-2010, 11:11 PM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-20-2010, 06:44 AM
RE: Holset HY35 Install info on om603 - by muuris - 08-20-2010, 07:15 AM
RE: Holset HY35 Install info on om603 - by Alastair E - 08-20-2010, 08:53 AM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-20-2010, 04:42 PM
RE: Holset HY35 Install info on om603 - by jeemu - 08-20-2010, 04:54 PM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-20-2010, 04:56 PM
RE: Holset HY35 Install info on om603 - by jeemu - 08-20-2010, 05:00 PM
RE: Holset HY35 Install info on om603 - by Alastair E - 08-20-2010, 03:41 AM
RE: Holset HY35 Install info on om603 - by jeemu - 08-20-2010, 01:30 PM
RE: Holset HY35 Install info on om603 - by Alastair E - 08-20-2010, 03:01 PM
RE: Holset HY35 Install info on om603 - by jeemu - 08-20-2010, 03:36 PM
RE: Holset HY35 Install info on om603 - by gsxr - 08-20-2010, 05:04 PM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-20-2010, 05:05 PM
RE: Holset HY35 Install info on om603 - by jeemu - 08-20-2010, 05:26 PM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-21-2010, 03:13 PM
RE: Holset HY35 Install info on om603 - by jeemu - 08-21-2010, 04:42 PM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-22-2010, 02:48 PM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-21-2010, 08:08 PM
RE: Holset HY35 Install info on om603 - by muuris - 08-22-2010, 01:38 AM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-22-2010, 03:28 PM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-22-2010, 03:35 PM
RE: Holset HY35 Install info on om603 - by muuris - 08-23-2010, 08:17 AM
RE: Holset HY35 Install info on om603 - by mbenzo300td - 08-23-2010, 01:30 AM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-23-2010, 04:02 AM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-23-2010, 08:43 AM
RE: Holset HY35 Install info on om603 - by Alastair E - 08-23-2010, 10:08 AM
RE: Holset HY35 Install info on om603 - by ForcedInduction - 08-23-2010, 05:58 PM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-23-2010, 10:19 AM
RE: Holset HY35 Install info on om603 - by jeemu - 08-23-2010, 11:34 AM
RE: Holset HY35 Install info on om603 - by mbenzo300td - 08-23-2010, 12:10 PM
RE: Holset HY35 Install info on om603 - by George3soccer - 08-23-2010, 12:11 PM
RE: Holset HY35 Install info on om603 - by jonbobshinigin - 08-23-2010, 12:51 PM
RE: Holset HY35 Install info on om603 - by mbenzo300td - 08-23-2010, 04:34 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 08-23-2010, 04:52 PM
RE: Holset HX35 Install info on om603 - by George3soccer - 08-23-2010, 04:54 PM
RE: Holset HX35 Install info on om603 - by 95e300dez - 08-23-2010, 09:20 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 08-23-2010, 09:38 PM
RE: Holset HX35 Install info on om603 - by muuris - 08-24-2010, 12:27 AM
RE: Holset HX35 Install info on om603 - by ForcedInduction - 08-24-2010, 07:08 AM
RE: Holset HX35 Install info on om603 - by Alastair E - 08-24-2010, 04:05 AM
RE: Holset HX35 Install info on om603 - by jeemu - 08-24-2010, 07:14 AM
RE: Holset HX35 Install info on om603 - by Rudolf_Diesel - 08-24-2010, 07:20 AM
RE: Holset HX35 Install info on om603 - by muuris - 08-24-2010, 08:38 AM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 08-24-2010, 08:53 AM
RE: Holset HX35 Install info on om603 - by jeemu - 08-24-2010, 10:27 AM
RE: Holset HX35 Install info on om603 - by mbenzo300td - 08-24-2010, 01:01 PM
RE: Holset HX35 Install info on om603 - by jeemu - 08-24-2010, 01:39 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 08-24-2010, 02:25 PM
RE: Holset HX35 Install info on om603 - by jeemu - 08-24-2010, 02:33 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 08-24-2010, 03:01 PM
RE: Holset HX35 Install info on om603 - by jeemu - 08-24-2010, 03:10 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 08-24-2010, 06:58 PM
RE: Holset HX35 Install info on om603 - by gsxr - 08-24-2010, 09:40 PM
RE: Holset HX35 Install info on om603 - by aaa - 08-24-2010, 10:16 PM
RE: Holset HX35 Install info on om603 - by jeemu - 08-25-2010, 01:27 AM
RE: Holset HX35 Install info on om603 - by ForcedInduction - 08-25-2010, 06:20 AM
RE: Holset HX35 Install info on om603 - by muuris - 08-25-2010, 08:06 AM
RE: Holset HX35 Install info on om603 - by muuris - 08-26-2010, 04:21 AM
RE: Holset HX35 Install info on om603 - by ForcedInduction - 08-26-2010, 08:02 AM
RE: Holset HX35 Install info on om603 - by muuris - 08-26-2010, 08:31 AM
RE: Holset HX35 Install info on om603 - by winmutt - 08-26-2010, 08:58 AM
RE: Holset HX35 Install info on om603 - by tomnik - 08-26-2010, 09:28 AM
RE: Holset HX35 Install info on om603 - by muuris - 08-26-2010, 09:35 AM
RE: Holset HX35 Install info on om603 - by ForcedInduction - 08-26-2010, 05:10 PM
RE: Holset HX35 Install info on om603 - by muuris - 08-27-2010, 01:06 AM
RE: Holset HX35 Install info on om603 - by ForcedInduction - 08-27-2010, 05:35 AM
RE: Holset HX35 Install info on om603 - by gsxr - 08-25-2010, 08:44 AM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 08-24-2010, 10:19 PM
RE: Holset HX35 Install info on om603 - by gsxr - 08-24-2010, 10:54 PM
RE: Holset HX35 Install info on om603 - by winmutt - 08-25-2010, 04:34 PM
RE: Holset HX35 Install info on om603 - by jeemu - 08-25-2010, 04:46 PM
RE: Holset HX35 Install info on om603 - by ForcedInduction - 08-25-2010, 07:15 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 08-25-2010, 06:54 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 08-25-2010, 07:55 PM
RE: Holset HX35 Install info on om603 - by gsxr - 08-25-2010, 09:17 PM
RE: Holset HX35 Install info on om603 - by Captain America - 08-26-2010, 12:47 AM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 08-31-2010, 10:48 PM
RE: Holset HX35 Install info on om603 - by George3soccer - 09-01-2010, 09:05 AM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 09-01-2010, 01:55 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 10-29-2010, 12:59 PM
RE: Holset HX35 Install info on om603 - by willbhere4u - 10-29-2010, 01:39 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 10-29-2010, 01:44 PM
RE: Holset HX35 Install info on om603 - by willbhere4u - 10-29-2010, 04:34 PM
RE: Holset HX35 Install info on om603 - by E300TSC - 10-30-2010, 07:12 AM
RE: Holset HX35 Install info on om603 - by ForcedInduction - 10-30-2010, 07:52 AM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 10-30-2010, 03:33 PM
RE: Holset HX35 Install info on om603 - by ForcedInduction - 10-30-2010, 04:01 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 10-30-2010, 05:31 PM
RE: Holset HX35 Install info on om603 - by willbhere4u - 10-30-2010, 08:06 PM
RE: Holset HX35 Install info on om603 - by ForcedInduction - 10-30-2010, 11:03 PM
RE: Holset HX35 Install info on om603 - by willbhere4u - 10-30-2010, 11:18 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 10-30-2010, 11:29 PM
RE: Holset HX35 Install info on om603 - by ForcedInduction - 10-30-2010, 11:53 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 11-01-2010, 10:54 AM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 01-08-2011, 04:47 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 02-07-2011, 10:46 AM
RE: Holset HX35 Install info on om603 - by casioqv - 02-07-2011, 03:05 PM
RE: Holset HX35 Install info on om603 - by winmutt - 02-07-2011, 03:00 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 02-07-2011, 03:09 PM
RE: Holset HX35 Install info on om603 - by casioqv - 02-07-2011, 03:13 PM
RE: Holset HX35 Install info on om603 - by ForcedInduction - 02-07-2011, 04:01 PM
RE: Holset HX35 Install info on om603 - by casioqv - 02-07-2011, 04:17 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 02-07-2011, 04:07 PM
RE: Holset HX35 Install info on om603 - by ForcedInduction - 02-08-2011, 05:09 AM
RE: Holset HX35 Install info on om603 - by casioqv - 02-08-2011, 02:18 PM
RE: Holset HX35 Install info on om603 - by ForcedInduction - 02-08-2011, 02:32 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 02-08-2011, 10:42 AM
RE: Holset HX35 Install info on om603 - by ForcedInduction - 02-08-2011, 01:37 PM
RE: Holset HX35 Install info on om603 - by winmutt - 02-08-2011, 10:49 AM
RE: Holset HX35 Install info on om603 - by jeemu - 02-08-2011, 03:28 PM
RE: Holset HX35 Install info on om603 - by gsxr - 02-09-2011, 06:00 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 03-08-2011, 11:57 AM
RE: Holset HX35 Install info on om603 - by winmutt - 03-08-2011, 12:18 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 03-08-2011, 12:43 PM
RE: Holset HX35 Install info on om603 - by gsxr - 03-08-2011, 04:55 PM
RE: Holset HX35 Install info on om603 - by winmutt - 03-09-2011, 10:38 AM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 03-09-2011, 04:40 PM
RE: Holset HX35 Install info on om603 - by frodes - 03-12-2011, 10:03 AM
RE: Holset HX35 Install info on om603 - by ForcedInduction - 03-12-2011, 10:27 AM
RE: Holset HX35 Install info on om603 - by frodes - 03-12-2011, 12:28 PM
RE: Holset HX35 Install info on om603 - by ForcedInduction - 03-13-2011, 01:24 AM
RE: Holset HX35 Install info on om603 - by gsxr - 03-13-2011, 10:56 AM
RE: Holset HX35 Install info on om603 - by frodes - 03-13-2011, 02:29 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 03-13-2011, 12:14 AM
RE: Holset HX35 Install info on om603 - by wlockerb - 03-13-2011, 03:31 AM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 03-13-2011, 11:49 AM
RE: Holset HX35 Install info on om603 - by gsxr - 03-13-2011, 11:55 AM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 03-13-2011, 03:09 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 03-13-2011, 11:17 PM
RE: Holset HX35 Install info on om603 - by gsxr - 03-14-2011, 06:24 PM
RE: Holset HX35 Install info on om603 - by frodes - 03-24-2011, 09:02 AM
RE: Holset HX35 Install info on om603 - by Einar - 03-30-2011, 10:48 AM
RE: Holset HX35 Install info on om603 - by frodes - 03-30-2011, 03:07 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 08-23-2011, 10:00 PM
RE: Holset HX35 Install info on om603 - by winmutt - 08-24-2011, 05:46 AM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 08-24-2011, 08:52 AM
RE: Holset HX35 Install info on om603 - by winmutt - 08-24-2011, 09:08 AM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 08-24-2011, 09:25 AM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 04-08-2018, 12:48 PM
RE: Holset HX35 Install info on om603 - by awsrock - 04-08-2018, 05:49 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 04-08-2018, 11:14 PM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 05-19-2018, 11:57 PM
RE: Holset HX35 Install info on om603 - by awsrock - 05-20-2018, 01:39 AM
RE: Holset HX35 Install info on om603 - by jonbobshinigin - 05-22-2018, 05:33 PM
Users browsing this thread:
7 Guest(s)
7 Guest(s)
Users browsing this thread:
7 Guest(s)
7 Guest(s)