OM617 adapters....who makes them?
OM617 adapters....who makes them?
(07-20-2010, 08:14 AM)dohcdelsol93 4x4labs out of CA makes an OM617 to chevy adapter (but their email addy is bad and they have a limited supply)
who else makes an adapter to bolt a chevy bellhousing/clutch/flywheel to an OM617 engine?
I'm going to be putting this engine in an 86 land cruiser and replacing the stock 2F gasser.
I have an endless supply of adapter bellhousings that will take my stock land cruiser H42 tranny to a SBC engine. I will have to use a low profile clutch/pressure plate (10 or 11" will both work)
And the engine output numbers are slightly better than the stock 2F but will net me better than 12-14mpg and i have the ability to use WVO when i stop being lazy and piece together a kit.
any help would be great
-Joshua
and...if anyone in the southeast (around upstate SC) knows of a good supplier for the OM617 turbo motors feel free to let me know...i want one. I don't mind if it's higher mileage as i intend on putting in new rings/bottom end bearings before i install it.
(07-20-2010, 08:14 AM)dohcdelsol93 4x4labs out of CA makes an OM617 to chevy adapter (but their email addy is bad and they have a limited supply)
who else makes an adapter to bolt a chevy bellhousing/clutch/flywheel to an OM617 engine?
I'm going to be putting this engine in an 86 land cruiser and replacing the stock 2F gasser.
I have an endless supply of adapter bellhousings that will take my stock land cruiser H42 tranny to a SBC engine. I will have to use a low profile clutch/pressure plate (10 or 11" will both work)
And the engine output numbers are slightly better than the stock 2F but will net me better than 12-14mpg and i have the ability to use WVO when i stop being lazy and piece together a kit.
any help would be great
-Joshua
and...if anyone in the southeast (around upstate SC) knows of a good supplier for the OM617 turbo motors feel free to let me know...i want one. I don't mind if it's higher mileage as i intend on putting in new rings/bottom end bearings before i install it.