Ball Bearing Turbo for OM602.980 2.9l

STD Maintenance General Ball Bearing Turbo for OM602.980 2.9l

View a Printable Version

0 Vote(s) - 0 Average

nazim

Unregistered

8

07-11-2010, 01:56 AM #1

Hello All,

Could anybody recommend a ball bearing turbo for my 2.9l turbodiesel 602.980 engine? The original one on the engine is Garrett 2538C. It is not in good condition and I would like to replace it with a faster spooling one...

Thanks,
Nazim

nazim

07-11-2010, 01:56 AM #1

~~ForcedInduction~~

Banned

3,628

07-11-2010, 02:16 AM #2

Ball bearing turbos don't have any advantage. By 5-10psi of boost the additional drag from the physical contact of the balls actually reduces performance (high drive pressure). Look through the VNT turbo threads here.

ForcedInduction

07-11-2010, 02:16 AM #2

nazim

Unregistered

8

07-11-2010, 02:34 AM #3

(07-11-2010, 02:16 AM)ForcedInduction Ball bearing turbos don't have any advantage. By 5-10psi of boost the additional drag from the physical contact of the balls actually reduces performance (high drive pressure). Look through the VNT turbo threads here.

OK. Can we mechanically control the VNT turbos?

Thanks

nazim

07-11-2010, 02:34 AM #3

(07-11-2010, 02:16 AM)ForcedInduction Ball bearing turbos don't have any advantage. By 5-10psi of boost the additional drag from the physical contact of the balls actually reduces performance (high drive pressure). Look through the VNT turbo threads here.

OK. Can we mechanically control the VNT turbos?

Thanks

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
1 Guest(s)